Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Item # C31028
Retail:$340.95
Our Price: $221.57
You Save: $119.38
Confirmed to Fit
2003 Jeep Wrangler
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (58)
- Q & A (0)
- Photos
2003 Jeep Wrangler - Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Mount Hitch
- Custom Fit Hitch
- CURT
- 9000 lbs Line Pull
- 350 lbs Vert Load
- 2 Inch Hitch
- Square Tube
Easily attach a variety of accessories to the front of your Jeep Wrangler with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 350 lbs
- Gross trailer weight: 3,500 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31028 CURT Front-Mount Trailer Hitch Receiver
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
Customer Reviews
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31028
Average Customer Rating: 4.9 out of 5 stars (58 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Ray12/08/2019
2000 JeepWrangler
Great product. Great job on packing, box was beat up and full of holes but all hardware was taped to the receiver so I was able to install the receiver instead of calling to get all the hardware replaced. This is my third product from etrailer.com and I am 110% happy with product and service.
by: Parker01/01/2023
This front hitch is great! I purchased it to easily mount and remove a fishing rod holder and cooler rack, rather than mounting it to the bumper. It fits my 1997 Jeep Wrangler perfectly. Install was very easy, but you do need to have the right tools for the job. The instructions were very clear and there is a [online video] from Curt Manufacturing that was easy to follow as well. Hitch is very high quality and sturdy. Completely enjoyed working with etrailer as well. Great prices and I couldn’t believe how fast they got my order shipped after my order was placed. Looking forward to many years enjoyment from this hitch and will definitely shop etrailer again!
by: Mark P.06/12/2019
2002 Jeep TJ
I installed the Curt front hitch on my 2002 Jeep TJ in preparation for mounting a snow plow. I also have a class III 9,000 lb receiver hitch winch that I will mount to the hitch. I choose his hitch type because I needed the receiver below the bumper (plow attachment height requirement), I currently have a brush guard above bumper and this hitch type appeared to be “heavy duty” with good online reviews. I also have an OME 2.5” heavy load lift kit on the Jeep.
The hitch was delivered within four business days and I had it installed in an hour, it’s that easy. I had previously viewed the Curt MFG installlation video, just a few steps, so I had tools ready. I positioned the hitch using a floor jack to mark the two frame holes that needed to be drilled. I enlarged the two existing frame holes, to feed the carriage bolts through, with a step drill bit. The fishwire to feed the carriage bolt and square hole spacer through the frame was the “cool” part and key to reduce install time. My wife helped with final hitch position lift and once flange nuts torqued I was really for testing snow plow.
The quality and fit of this hitch is exceptional. The mounting hardware is good quality too, grade 8 yellow tinted nuts and bolts. The height of the receiver is 15” (to bottom of square tubing) with OME lift kit. The snow plow fit and operated perfectly. Very pleased with Curt hitch and eTrailer purchase.
by: Adam K06/25/2023
Fit is exact, excellent product. A over sized drill bit or step bit recommended for making access holes larger.
by: Jay B.07/21/2017
2006 JeepWrangler
The product was top quality. Easy to install (once we removed an old towing hitch). We used it to mount a snow blade of a 2006 Jeep Wrangler and it worked beautifully.
by: John 11/17/2023
Hi. I installed my hitch with no hitches other than I'm 68 and movin kinda slow. I have installed two hitches and they are straight forward. I definitely read the instructions.
by: Mark K03/09/2015
2004 Jeep TJ
Sturdy built receiver. Requires enlarging 4 existing holes in frame and drilling 2 new holes. You will need a grinding stone that fits in the existing holes and a 9/16 drill bit for the new holes. Fairly straightforward installation.
by: Steve11/10/2017
2005 Jeep TJ
It is hands down the nicest part of my 2005 TJ. fast delivery. I was worried it couldn't handle my snow plow. I think the plow will break before the receiver
by: Carleton04/28/2020
2004 Jeep TJ
Easy to install. Great price. Outstanding quality. And superior customer service from etrailer.com. Mighty fine. Mighty fine!
by: Donna 02/26/2024
One year later and it still looks like I have just bought it. I would definitely purchase again.
by: Kevin05/17/2020
1997 Jeep TJ
Real easy install. Complete in 45 mins! Just read the instructions.
by: Brian05/11/2021
I'm very happy with this hitch. It fit on my 2002 Tj perfectly with the front tubular bumper with no modifications.
by: Kent01/24/2015
Jeep
This hitch is excellent! it fits well on my jeep and works well with the plow that is attached. The installation requires tools and talent. I found a step drill was all that was needed to enlarge the mounting holes and of course a 9/16" drill to drill the additional hole needed to mount it to the frame. what I thought would be the hardest part threading the bolts from the inside of the frame was made easy by the threading springs included in the package. Kudos to who ever thought of that. I was able to use a small floor jack to hold it up while I marked the frame and inserted the bolts which made it easy. This is one of those projects that take four hours the first time you do it and one hour the second.
by: Joel01/08/2022
Arthritis, bad knees and bad back...
I used the bike lift and managed just fine. Thanks
by: Bill11/17/2023
Product works like it should.
by: Bruce W.10/23/2017
2006 JeepWrangler
A well-designed, solid product. Installation instructions are clear. Good quality hardware. Did the whole thing by myself in an afternoon. To mark the location of two holes that need to be drilled in the frame, I supported the hitch on a long 2x6 and miscellaneous pieces of lumber that I keep on hand for cribbing purposes.
On my 2006 TJ Wrangler, there was nearly a 1/4" gap on both sides between the frame and the hitch plates. Some clearance is needed to install the hitch, but that gap seemed excessive. So I inserted four 1/2" washers on both bolts on the driver side of the hitch between the frame and hitch plate to take up most of the gap.
Now I have hitch mounts front and rear. I also bought a hitch mount for my winch. So, no matter how I get my Jeep stuck, I can pull it out in the right direction.
Bruce W.
10/23/2018
Solid construction. Durable finish. Highly recommend.
by: Brian 01/10/2023
Very well built, easy installation with clear instructions and good hardware.
by: John 12/05/2022
1997 Jeep TJ
Nice hitch, well made and easy to install, especially when you have a video that shows step by step!!! incredible quality in this product
by: William 03/18/2020
JeepWrangler
We live on a farm and have several pieces of machinery that needs to be moved from place to place, not just towed behind. The front hitch receiver on our Jeep Wrangler makes this a piece of cake, not to mention dealing with our boat at the boat ramp. Works extremely well. Mounted a winch on a "hitch extender", and use it on either the front or rear of the Jeep now.
by: Steve04/26/2020
This is the 4th time I've ordered form etrailer and they couldn't have been nicer or more helpful. I ordered with Stacey A. who was very courteous, polite, and knowledgeable. Ordered a front hitch for my Jeep Wrangler for a bike carrier and to attach my Warn winch. etrailer sent a video in my confirmation e-mail which was good as the provided instructions were not as clear to follow. Installed it by myself in less than an hour with no issues. Tested it by pulling my 3/4 ton Ram diesel up a 15 degree hill with the Jeep in 4 WD. NO problems. Would recommend etrailer and Curt hitch.
by: Dennis11/16/2021
The front mount trailer hitch is working very well. It was easy to install, following the [online] video instructions. I plowed all my property trails several times last winter on some rugged terrain and the hitch didn't move even when I hit a stump in the snow that stopped me dead. I highly recommend this hitch.
by: John P01/07/2021
Jeep
Works great- installed easily . Just want people to know - Jeep has two different front mounts.
My first hitch just missed from an easy install, but of course Etrailer sent me the replacement and we agreed to something in the middle for shipping the new one and then the old one back.
So I’m very pleased
by: Patric11/14/2018
1997 Jeep TJ
The front hitch fit perfectly on my 97 Jeep TJ. The written instructions that came with the product were okay, but I had watched a You Tube video done by Curt of the installation for my vehicle before purchasing the product, and that was most helpful in me understanding how it was to be installed. The hitch looks good and is very rugged with a high quality black finish. I will be using the hitch to mount a plow, among other things.
by: Tim M11/13/2019
Jeep
Great hitch - pretty straight forward project for a do it yourselfer. Good instructions and the addition of the fish wire made pulling the hardware through the frame pretty easy. I use the hitch for a lightweight plow mount and it's been an awesome addition to my Jeep.
by: Donald 09/21/2018
Jeep TJ
Great fit, great instructions, all the parts were there. Heavy duty bolted to the frame, bought this to be able to use my hitch mounted winch from the front of my TJ. have also used to moved trailers around the property. Definitely recommend this product.
25
58
Show More Reviews
See what our Experts say about this CURT Front Receiver Hitch
- Difference in Above Bumper and Below Bumper Front Receiver Hitch for 2004 Jeep WranglerI would recommend to first check with the manufacturer of the hitch mount deer feeder to see if they recommend an above bumper hitch or a below bumper hitch on the front of your 2004 Jeep Wrangler. Depending on the style of the deer feeder you have you might need to have clearance from the bumper, so an above bumper hitch might work better for that application. The installation of the above bumper hitch like Curt Front Hitch, part # 31408, on your 2004 Jeep Wrangler, is listed as a 30...
view full answer... - Compatibility of Front Hitch on a 2004 Jeep Wrangler with Mountain PackageI looked up the Mountain addition for your vehicle and it didn't mention if it had an aftermarket bumper but it did state fog lights which may be an issue for mounting the Draw-Tite # 65048 hitch. Because these hitches are tested with the vehicle's base model and not all the trim packages, I would take a look at the instructions for the # 65048 and the Curt # C31028. These two carry the same capacity but mount in two different ways, you may have luck in one or the other. If you do indeed...
view full answer... - Front Hitch Recommendation for 2002 Jeep Wrangler with Double Tube BumperTo add a front mount trailer hitch to your 2002 Jeep TJ with a tube style front bumper you will need to use Curt front mount hitch # C31028. It attaches to the frame of the Jeep and will sit underneath your front bumper.
view full answer...
- Which Curt Front Mount Trailer Hitch Receiver Fits A 1995 Jeep Wrangler?I have another option for you, but the Curt Front Mount Trailer Hitch Receiver # C31028 you were looking at is only confirmed to fit the 1997-2003 Jeep Wrangler and will not fit your 1995 Jeep Wrangler. Instead I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31408 which is confirmed to fit your 1995 Jeep Wrangler and will give you the 2" receiver you need to carry your surf pole holder or cooler. You will need to make sure you do not exceed the 350lb vertical...
view full answer... - Recommended Front Mount Hitch for a 2005 Jeep Wrangler That Mounts Under BumperI do have a front mount trailer hitch for your 2005 Jeep Wrangler that can be mounted under the front bumper, the Curt Front Mount Trailer Hitch Receiver part # C31028 (see photo) which is the only option that can be mounted in this way but the Draw-Tite Front Mount Trailer Hitch Receiver part # 65048 installs above the front bumper.
view full answer...
- Will the Curt Front Mount Hitch # C31028 Install Below the Bumper on a 1999 Jeep TJThe Curt Front Mount Hitch, # C31028, does install under the bumper of your 1999 Jeep TJ and, according to my contact at Curt, will not interfere with the steering box or pitman arm. I have attached a photo showing what the hitch will look like once installed. I have also attached a link to the installation instructions for you tow check out.
view full answer...
- Correct Front Mount Trailer Hitch for 2005 Jeep Wrangler with Tuber Style BumperThe only front mount trailer hitch option we offer for a 2005 Jeep Wrangler with tube style bumper is the Curt Front Mount Trailer Hitch Receiver part # C31028.
view full answer... - Which Front Hitch Fits 1998 Jeep Wrangler for Use with Snow PlowSince your goal is to push a plow with a front hitch for our 1998 Jeep Wrangler you'd want the hitch part # C31028 instead as the Draw Tite # 65048 puts the hitch opening too high for a plow like the SnowBear part # SB324-080 to be used. In the install instructions there's no mention of needing to remove tow hooks so you wouldn't need to remove them.
view full answer... - Install Bracket Recommendation for SnowBear Plow on 2006 Jeep WranglerSnowBear plows either install to a vehicle with mounting brackets or a front hitch. Since it sounds like your plow uses brackets the correct kit for your 2006 Jeep Wrangler would be the part # SB397-010. If you needed a hitch though the correct hitch would be the # C31028 instead.
view full answer... - Can the 8 Drop Dual Hitch Adapter Be Used for TowingI do have an option for you but none of the dual hitch adapters that provide adequate drop can be used for towing. Instead, you'd need to go with a standard ball mount with the drop you need like the Curt Ball Mount part # C45090. Then, you can carry the rod rack on the tongue of the trailer (if a-frame) with the Swagman Straddler part # S80503 or on the front of the vehicle with a front mount trailer hitch, the Curt Front Mount Trailer Hitch Receiver part # C31028.
view full answer... - Front Hitch Recommendations for Above and Below Bumper for Jeep Wrangler 2000The Curt Front Hitch part # 31408 that you referenced installs above the bumper, if you wanted a front mount hitch that would install below the bumper you would want the Front Hitch part # C31028.
view full answer... - Front Mounted Trailer Hitch for 2006 Jeep Wrangler Unlimited with Tube BumperThe recommended front mounted trailer hitch receiver for a 2006 Jeep Wrangler Unlimited with a tube style bumper is the Curt Front Mount Trailer Hitch Receiver # C31028. Just keep in mind the bumper does need to be the OEM factory bumper for the hitch to fit. I have added a link to the installation instructions for you to check out as well.
view full answer... - Bolt-On Blue Ox Tow Bar Adapters to Work on 1997 Jeep TJ with Blue Ox Acclaim Tow BarWe have the Blue Ox Universal Bolt-On Adapters # BX88266 that will work with the Blue Ox Acclaim # BX4330. They need to be bolted on to a flat metal surface and if you're using your bumper it may need to be reinforced. I contacted Blue Ox and they've never encountered any issues using the adapters with a front mount hitch as long as they are able to be installed without the hitch interfering
view full answer... - Recommended Front Hitch Receiver For 2004 Jeep TJFor your 2004 Jeep TJ, I recommend the Curt Front Mount Trailer Hitch Receiver 2", # C31028. This front mounted hitch is compatible with a round bumper. It is an easy bolt on application, but some drilling is required for installation. Access holes may need to be enlarged by drilling, filing, rotary tool. This hitch has the complete hardware kit included and has a vertical load limit of 350 lbs and a line pull rating or 9,000 lbs. This is the only front hitch we currently carry that...
view full answer... - Recommended Snow Plow For A 1999 Jeep Wrangler TJ To install a snow plow on your 1999 Jeep Wrangler TJ you have two options, one that uses specific brackets to mount to the vehicle or one that mounts to a front mounted trailer hitch receiver. If you want to use one that mounts using a front mounted trailer hitch receiver then I recommend the SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall # SB324-081 with the CURT Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31028. This residential hitch-mounted...
view full answer... - Front Mounted Trailer Hitch Receiver for 2006 Ford F-150 and 2006 Jeep WranglerWe do have front-mounted trailer hitch receivers that are a fit for both your 2006 Ford F-150 and your 2006 Jeep Wrangler, and let's start with the Wrangler. For that the best option because it is a no-drill install, is the Curt Front Mount Trailer Hitch Receiver # 31408. The only thing to note with this hitch is that it does NOT fit Wranglers with the tube-style bumper; if you have this style of bumper you will need the Curt Front Mount Trailer Hitch Receiver # C31028. Then for your...
view full answer... - Will Curt Front Mount Receiver # C31028 Fit a 1997 Jeep Wrangler with Double Tube BumperIf the double tube bumper on you 1997 Jeep Wrangler does not hang down any lower than the regular stock bumper would then Curt font mount hitch receiver # C31028 will fit. It has not been test fit on a model with the tube style bumper.
view full answer...
- Recommended Front Hitch for a 1995 Jeep YJI have a solution for your Jeep YJ but it isn't the Curt front hitch # C31028 you were looking at. I don't show that as being a fit for your model. I would instead recommend the Draw-Tite # 65048 front mount hitch for your 1995 Jeep YJ. The Draw-Tite hitch will have a 2 inch receiver and 300lbs of vert pull and 9,000lbs of line pull. This will install on top of your bumper, I've linked the instructions to this page for your convenience. There is a Curt branded front hitch # 31408 for...
view full answer... - How is the Blade Lifted/Lowered on the Detail K2 Avalanche Elite Snowplow for a 2002 Jeep TJThe Detail K2 Avalanche Elite Snowplow part # K2AVAL8219ELT has a 82" wide x 19" tall which is raised and lower via an electric motor which is attached to a set of chain links. In order to use this on a 2002 Jeep TJ you will need the Curt Front Mount Trailer Hitch Receiver part # C31028.
view full answer... - Front Mounted Receiver Hitch That Mounts Under Bumper for 2000 Jeep Wrangler TJWe've got what you're looking for. The Curt Front Mount Hitch Receiver, part # C31028 mounts to the undersides of the frame members at the front of your Jeep so that the receiver opening is located under the front bumper, as you can see in the photo I've provided. If you need the front receiver to provide an attachment point for something fairly heavy like a snow plow, I'd also recommend the Timbren # TJFTJ springs which fit 4x4 models only. The Timbrens prevent the front end from sagging...
view full answer...
- Front Hitch Receiver for Meyer Home Snowplow on a 2001 Jeep TJThe Meyer home snowplow requires a below bumper front hitch. For your 2001 Jeep TJ you will want the Curt Front Mount Trailer Hitch Receiver item # C31028 you were looking at. This front hitch mounts below the bumper of your Jeep and has plenty of capacity to handle a snowplow.
view full answer... - Front Hitch for 2004 Jeep Wrangler that Installs Under Front BumperFor your 2004 Jeep Wrangler TJ we have a front hitch that's designed to fit underneath the front bumper with the Curt # C31028 which would be your best option, but there isn't a way to mount a # 31408 on top of the bumper that you have.
view full answer...
- Will Curt Front Hitch Receiver C31028 Fit a 2006 Jeep Wrangler Unlimited with Tube BumperI checked with Curt and they show that the front hitch # C31028 will fit your 2006 Jeep Wrangler Unlimited provided that the tube bumper you have is the factory tube bumper. If it is not then there is no guarantee that it will fit. I have included a link to the returns policy.
view full answer... - Front Mount Trailer Hitch that Mounts Under the Bumper on a 1998 Jeep WranglerWe do have a front mount trailer hitch receiver that fits UNDER the bumper on a 1998 Jeep Wrangler. Take a look at Curt hitch # C31028. I have also linked the instructions to the right showing what it looks like installed. A lot of people look for the exact opposite: they want the receiver higher for ground clearance issues. But if you need it below the bumper then # C31028 is the receiver for you.
view full answer...
Do you have a question about this Front Receiver Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ray
12/9/2020
Still looks new and works great. No issues