Front Hitch Recommendation for 2002 Jeep Wrangler with Double Tube Bumper

Question

Question:

So this hitch you sell C31028 will bolt on to frame side to side and below existing double tube existing on jeep .mine is a 2002 wrangler T J sport

asked by: Tony

0

Expert Reply:

To add a front mount trailer hitch to your 2002 Jeep TJ with a tube style front bumper you will need to use Curt front mount hitch # C31028. It attaches to the frame of the Jeep and will sit underneath your front bumper.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 6

Hey Dave, welcome back. At this time, we don't have a custom-fit front receiver hitch for the 2026 Toyota Sequoia, and none of the major manufacturers, including Curt, Draw-Tite, or EcoHitch, offer one for that vehicle. The only option would be a…

view full answer...

Answer 7

Hello Chris, thanks for reaching out. I went out to our warehouse and measured the etrailer Base Plate #e74FV. The thickness of the tabs is 0.45". The Distance between is 0.625" or 5/8". The pin hole is a 1/2" diameter. This base…

view full answer...

Front Hitch Recommendation for 2002 Jeep Wrangler with Double Tube Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching