The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…
Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…
Hello Dan, thanks for reaching out. I do have a product I believe will work for you, but the Replacement Extra Long Trailer Tongue for CE Smith Multi-Sport Trailers #CES45FR is 2" wide by 3" tall so this would not fit a 2" hitch. If…
From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…
Hey Ray, thanks for the information! To flat tow your 2020 Chevy Colorado ZR2 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item #e94ZR Baseplate Kit - etrailer Invisible Base Plate Kit item #e98966…
The connection labeling is written in raised lettering just to the outside of the poles where the wires actually connect to the connector. The connectors are actually labeled with letter abbreviations that designate what wire goes where for connector…
Hi Nick! The B&W Anti-Rattle Clamp for 2" Hitch Receivers #BW45FR will work with any standard 2" tow & stow, including the Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black #BWTS10048B. That…
Hey Alexander. The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2024 Nissan Frontier. It measures 1-8/16" tall x 1-1/8" wide. There are…
Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.
The Gen-Y Weld-On 2" Receiver Tube - 12" Long - Steel #325-GH-003 has a tube thickness of 7/16 inch. The collar thickness is 1/2 inch and the collar length is 3/4 inch not including the weld bead on the back.
Hey Dan, I can definitely help you out! For a complete setup you will need the tow bar, base plate kit, safety cables, wiring, and a brake system. I recommend the following: -Blue Ox Base Plate Kit #BLU94ER -Blue Ox Avail Non-Binding Tow Bar #BLU28QV…
Hey Blake, welcome back. The 18" Combo Bar with 2-1/2" Trailer Hitch Receiver item #C49511 is made of 1/4" thick steel. It does not have a weight rating. This is an unfinished 2-1/2" hitch receiver is designed for fabrication so…
The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…
Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…
Hello Dan, thanks for reaching out. I do have a product I believe will work for you, but the Replacement Extra Long Trailer Tongue for CE Smith Multi-Sport Trailers #CES45FR is 2" wide by 3" tall so this would not fit a 2" hitch. If…
From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…
Hey Ray, thanks for the information! To flat tow your 2020 Chevy Colorado ZR2 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item #e94ZR Baseplate Kit - etrailer Invisible Base Plate Kit item #e98966…
The connection labeling is written in raised lettering just to the outside of the poles where the wires actually connect to the connector. The connectors are actually labeled with letter abbreviations that designate what wire goes where for connector…
Hi Nick! The B&W Anti-Rattle Clamp for 2" Hitch Receivers #BW45FR will work with any standard 2" tow & stow, including the Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black #BWTS10048B. That…
Hey Alexander. The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2024 Nissan Frontier. It measures 1-8/16" tall x 1-1/8" wide. There are…
Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.
The Gen-Y Weld-On 2" Receiver Tube - 12" Long - Steel #325-GH-003 has a tube thickness of 7/16 inch. The collar thickness is 1/2 inch and the collar length is 3/4 inch not including the weld bead on the back.
Hey Dan, I can definitely help you out! For a complete setup you will need the tow bar, base plate kit, safety cables, wiring, and a brake system. I recommend the following: -Blue Ox Base Plate Kit #BLU94ER -Blue Ox Avail Non-Binding Tow Bar #BLU28QV…
Hey Blake, welcome back. The 18" Combo Bar with 2-1/2" Trailer Hitch Receiver item #C49511 is made of 1/4" thick steel. It does not have a weight rating. This is an unfinished 2-1/2" hitch receiver is designed for fabrication so…
Hitch fabrication parts are essential for customizing and building your own hitch setups. Whether you're upgrading your truck, trailer, or tractor, these parts offer flexibility and durability. Consider the compatibility with your vehicle and the specific project needs, such as weight capacity and welding requirements.
Consider the compatibility with your vehicle, the weight capacity needed, and the specific project requirements. Ensure the parts are made of high-quality steel for durability and check if they require any modifications or welding for your setup.
Look for parts that are lightly oiled and free of rust, as this makes for clean welding. Some parts may require minimal prep work, but ensuring the steel is clean will help achieve a strong weld.
Absolutely! Many enthusiasts use these parts for custom projects like building leveler mounts or converting hitch sizes. They offer flexibility and can be adapted to various applications with some creativity and the right tools.
Yes, many parts are designed to be heavy-duty, massive, and strong, suitable for applications like mounting on trucks or trailers. Always check the weight ratings and ensure they match your vehicle's capacity.
Occasionally, parts may arrive with minor imperfections like uneven ends, but these can often be corrected with tools like a belt sander. Always inspect parts upon arrival to ensure they meet your project's standards.
Filters
