Filter by Hitch Fabrication Part
$8.61 - $8.61
$17.54 - $121.31
$31.23 - $112.05
Videos
for Hitch Fabrication Parts
Help Articles
for Hitch Fabrication Parts
Expert Answers
for Hitch Fabrication Parts
..." to the back of the receiver from the last bolt. The Curt 3-Piece Trailer Hitch item # C15511 measures 8" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver...
view full answer...I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you…
view full answer...The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…
view full answer...Hi Ricky; the longest extender we have that fits a 2" receiver is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long #HE18. Are you trying to clear something specific on the back of your Sprinter? Depending on what…
view full answer...The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
view full answer...Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.
view full answer...The Buyers Products Fabricators Hitch Plates like part #3371809042 are not given a weight capacity by the manufacturer. This is because the weight capacity will largely be dependent on how securely it is mounted. The highest rated pintle hook we…
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…
view full answer...Hello Pat. The Replacement Trailer Hub Wheel Stud #RG03-080 has a .545" knurl diameter. The distance from the cap to the threads is 1-3/16".
view full answer...I checked with Torklift and they informed me that their hitch part #TLC1205-30 has the following dimensions: The center to center hole is approx 39.5" total width is about 41.5" side plate height is 9.75"
view full answer......I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced...
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Filters
17 results
Filter Results
$8.61 - $8.61
$17.54 - $121.31
$31.23 - $112.05