1. Home
2. Towing
3. Hitch Fabrication Parts
4. Fits 2 Inch Hitchx

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

...I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think...

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

Hello Pat. The Replacement Trailer Hub Wheel Stud #RG03-080 has a .545" knurl diameter. The distance from the cap to the threads is 1-3/16".

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

The Buyers Products Fabricators Hitch Plates like part #3371809042 are not given a weight capacity by the manufacturer. This is because the weight capacity will largely be dependent on how securely it is mounted. The highest rated pintle hook we…

...Hey Derrick, I checked directly with TorkLift for you, and the TorkLift Tie Downs - Front and Rear # TL87DR are a fit for the 2024 Ford F-350 with the bed access step near the cab. The # TL87DR...

...loads. If you are interested in a hitch mounted bike rack then I recommend the Thule Hitching Post Pro # TH934XTR. Not only does it feature the ability to fit on both 1-1/4 inch and 2 inch hitches...

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

...I NEED A HITCH PLATE FOR 2015 INTERNATIONAL PROSTAR I HAVE THE MESSURE INSIDE THE C CHANNEL ITS 33INCH 1/4 [-33inch 1/4-] on the out side...

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

...I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think...

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

Hello Pat. The Replacement Trailer Hub Wheel Stud #RG03-080 has a .545" knurl diameter. The distance from the cap to the threads is 1-3/16".

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

The Buyers Products Fabricators Hitch Plates like part #3371809042 are not given a weight capacity by the manufacturer. This is because the weight capacity will largely be dependent on how securely it is mounted. The highest rated pintle hook we…

...Hey Derrick, I checked directly with TorkLift for you, and the TorkLift Tie Downs - Front and Rear # TL87DR are a fit for the 2024 Ford F-350 with the bed access step near the cab. The # TL87DR...

...loads. If you are interested in a hitch mounted bike rack then I recommend the Thule Hitching Post Pro # TH934XTR. Not only does it feature the ability to fit on both 1-1/4 inch and 2 inch hitches...

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

...I NEED A HITCH PLATE FOR 2015 INTERNATIONAL PROSTAR I HAVE THE MESSURE INSIDE THE C CHANNEL ITS 33INCH 1/4 [-33inch 1/4-] on the out side...

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.