Weld on Receiver Tubes from Buyers Products are available in a variety of lengths, dimensions, and finishes to match your towing needs. The 2-1/2" I.D. receiver tube features a solid stress collar opening. The 12" plain finished tube contains a 5/8" hitch pin hole and can achieve a rating up to 20,000 lbs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the 12 inch long, two and a half inch by two and a half inch, raw finish, weld-on receiver tube. Now these weld-on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part number is the 12 inch long version. Now this is a two and a half inch by two and a half inch receiver tube. And that's measured internally. Features a nice cast steel collar, has a solid stress collar opening.This 12 inch long tube contains a 5/8 inch diameter hitch pinhole and it can achieve a rating up to 20,000 pounds.
It is a carbon steel construction, has a nice raw finish to it. And you can see if you look through, it goes all the way through, it's open on both ends. I'm going to measure it for you, overall length from one end to the other is right at inches. And the maximum gross trailer weight capacity is 20,000 pounds.But that should do it for the review on the 12 inch long, two and a half inch by two and a half inch, raw finish, weld-on receiver tube.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Nice Heavy Duty 2-1/2" Receiver Weldment This is going on a "Quick-Attach" for my Excavator With a 2" adapter .. I have a 5' Pine Needle Rake that will work great for finishing worked ground for seeding. I plan on fabbing a Ripper Tooth that will indeed be 2-1/2" shank. The tools that I can make for this will be very useful .. not to mention just putting a ball hitch in it for moving trailers in & out of weird places, with the excavator. Thanks for providing these parts "etrailer" !! ~Glenn 849905
Got the product on time and welded it to to my truck bed. Right size and I have had no problems. I needed to use a longer hitch to get lower and still use heavy duty hitch. 840125
It’s the other part of the equation. I changed from a pintle to a receiver and pull a lot of heavy items. 769728
Good Quick service. Shipping immediately and received in a couple days. 764943
This was exactly what we needed. 511401
Do you have a question about this Hitch Fabrication Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.