Hitch Fabrication Parts - Raw Finish

I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you…

When it comes to square tubing, there is always going to be a degree of tolerance even with the most precision manufacturing. The tolerance of the Curt trailer hitch receivers such as the Curt Trailer Hitch Receiver part #C15409 is around .050"…

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

Hey Tom! The Shocker Trailer Tongue Mount #SHK37MR has a 3" wide channel with holes spaced 2" apart. For a hitch ball you can use the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for Curt 2" Adjustable Ball Mount #C45912.…

Hey Seth, yes we do have a hub/drum that fits the etrailer 7k axle part #e95GR with a 6 on 5-1/2 inch bolt pattern with the part #AKHD-655-6-EZ-K.

I'm not 100% sure which locking hitch pin you have but it sounds like a complete failure of the mechanism. This doesn't happen very often but it is possible. I would try spraying some WD-40 up into the lock if you can where it meets the hitch…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Each of the motors of the Happijac Electric Truck Camper Jack System #LC736515-ELKIT is protected with a 25 amp fuse. So it can pull right up to 25 amps.

Hi Cody; Buyers Products was unable to confirm if the #3371809060A could fit your 1990 Ford F-Superduty. What you can do is look at the measurements below to see if they line up with what you have. If not, you could use one of the following universal…

Though we do not have a custom fit option for your two Freightliner trucks, I may still have something that will work. I will say that both of these will depend on how wide the frame is where these would attach. The more heavy duty option will be the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you…

When it comes to square tubing, there is always going to be a degree of tolerance even with the most precision manufacturing. The tolerance of the Curt trailer hitch receivers such as the Curt Trailer Hitch Receiver part #C15409 is around .050"…

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

Hey Tom! The Shocker Trailer Tongue Mount #SHK37MR has a 3" wide channel with holes spaced 2" apart. For a hitch ball you can use the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for Curt 2" Adjustable Ball Mount #C45912.…

Hey Seth, yes we do have a hub/drum that fits the etrailer 7k axle part #e95GR with a 6 on 5-1/2 inch bolt pattern with the part #AKHD-655-6-EZ-K.

I'm not 100% sure which locking hitch pin you have but it sounds like a complete failure of the mechanism. This doesn't happen very often but it is possible. I would try spraying some WD-40 up into the lock if you can where it meets the hitch…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Each of the motors of the Happijac Electric Truck Camper Jack System #LC736515-ELKIT is protected with a 25 amp fuse. So it can pull right up to 25 amps.

Hi Cody; Buyers Products was unable to confirm if the #3371809060A could fit your 1990 Ford F-Superduty. What you can do is look at the measurements below to see if they line up with what you have. If not, you could use one of the following universal…

Though we do not have a custom fit option for your two Freightliner trucks, I may still have something that will work. I will say that both of these will depend on how wide the frame is where these would attach. The more heavy duty option will be the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.