"Junior" Locking Stainless Steel Flush Door Latch

Ask the Experts about this Redline Enclosed Trailer Parts

• Flush Mount Door Latch for Cargo Trailer Side Door
  Thank you for the detailed photo, it was a great help. The latches are actually not designed to fit the thickness of the door so you could use whichever size would allow the pin to catch in the door lip. f you were able to make it so the door did not have a gap, then you could use a door latch such as the Paneloc Slam Latch # F708-204P011, which is 2" long x 1-5/8" wide with a mounting hole diameter of 3/16" and a pin width of 7/16". A different option would be the Paneloc Slam Latch #...
  view full answer...
• Is Strike Plate Available for "Junior" Locking Stainless Steel Flush Door Latch
  I checked to see if we had any strike plates that would work with the "Junior" Locking Stainless Steel Flush Door Latch # L1883 and while we don't, I was able to see that the Global Link Replacement Strike Plate # 295-000022 was really close to working and it has an opening of 11/16" wide. I don't think another 1/16" would cut it so I'd say look for one that has at least a 7/8" opening.
  view full answer...
• Can The Redline Door Latch, # L1883, Be Keyed Alike
  I called the supplier (Redline) and they said that all of the Redline Door Latch, # L1883, use the same key. Each latch will come with 2 keys. I also pulled 3 of them from the warehouse to verify that and they were all keyed the same. I also have the Redline Door Latch with Inside Release, # L1833, which is the same latch but with a knob installed on the interior side of the latch to provide an inside release.
  view full answer...
• Non-Locking Junior Stainless Steel Paddle Latch
  Unfortunately, there's not a stainless, non-locking version of this latch. However, there's a non-locking version of the "Junior" latch paddle available in steel as part # N1980.
  view full answer...
• Recommended Door Lock For Enclosed Trailer That Can be Locked From Inside
  You may want to take a look at the RV Entry Door Latch Kit, part # 295-000019. This is designed for RV doors but if your door is between 1-1/4 to 1-1/2 inches thick, it may work great for you. This lock features a keyed lock and deadbolt. 2 keys are included.
  view full answer...
• Keyed Alike Flush Mount Locking Door Latches
  I called my contact at Redline, and they told me that they use the same lock and key for their flush mount door latches. So you could order 4 of part # L1883 and they would all be keyed alike. If you need a larger latch, 4 of part # L3980 would also be keyed alike. Both of these flush mount locking door latches use the same key number.
  view full answer...
• 1999 Casita Travel Trailer 16 Spirit / Door Lock Replacemant Recommendation
  It doesn't look like we have anything that would be a direct replacement for the door latch of your 1999 Casita travel trailer, but we do have several different door latches that could be made to work on your door including the part # L1883. I attached a link to the right that has all of them. I also attached a review video for this door latch for you to check out.
  view full answer...
• What Size are the Mounting Holes on the Junior Locking Stainless Steel Flush Door Latch
  I spoke with Redneck Trailer Supplies and they informed me that the mounting holes on the Junior Locking Stainless Steel Flush Door Latch part # L1883 are about 3/16" diameter.
  view full answer...
• What Is The Recommended Door Thickness For The Locking Flush Door Latch Part # L1883
  I went out to our warehouse and measured the "Junior" Locking Stainless Steel Flush Door Latch part # L1883 for you. The distance of the outer surface area that houses the 4 bolt holes is 1/2" on each side and the distance the latch protrudes out from the flange is 1/4" . I called my contact at Redline Trailers and they informed me that this lock can be used on a 3/4" thick door. To open for the inside, I recommend using the Inside Knob for Locking Stainless Steel Flush Door Latch part...
  view full answer...
• Can Trailer Door Latch # L1883 be Opened from Both Sides
  The Locking Stainless Steel Flush Door Latch, # L1883, has a threaded hole on the inside part in which you could insert your own knob so that it can be easily opened from inside. Another option is basically the same door latch that comes with the knob already in place. It is # L1833.
  view full answer...
• What is the Depth of the Locking Stainless Steel Flush Door Latch # L1883
  I spoke with my contact at Redline and he informed me that latch of this Locking Stainless Steel Flush Door Latch, part # L1883, will sit flush with the surface that it will mount to. He also said there is a distance of 3/4 of an inch behind the handle to the back wall of the latch. The overall thickness of this is 1-1/4 inches.
  view full answer...
• Can a Looking Door Handle be Added to a TNT Cargo Trailer
  Adding a locking door handle such as # L1883 is not all that difficult at all. You just need to cut the proper size hole in the right place, attach the handle, and make it look all nice and neat. Locking door handle # L1883 requires a 2-5/8 inch by 3-3/4 inch hole. The door thickness can be no greater than 7/8 of an inch thick to use this handle. The full size version, # L3980, requires a 3-3/8 inch by 4-5/8 inch hole and fits doors up to 1-1/16 inches thick. I have linked a couple...
  view full answer...
• Recommended Junior Locking Paddle Latch for 3/4 Inch Plywood Mount
  For your "Junior" Locking Stainless Steel Flush Door Latch, I recommend # L1883 which can be mounted in 3/4 inch plywood. The mounting holes are 3 inches center on center vertically and 3-1/4 center on center horizontally or vice versa depending on your mounting preference. The mounting hole must be 2-3/4 x 3-3/4 inches.
  view full answer...
• Hole Size and Door Thickness Required to Install Junior Locking Stainless Steel Flush Door Latch
  The Junior Locking Stainless Steel Flush Door Latch # L1883 mounts in a 2-5/8 inch tall x 3-3/4 inch wide hole and the door will have to be no thicker than 7/8 of an inch to work. You will need to measure the door thickness on your trailer and make sure that you can cut a hole to the proper dimensions for the handle.
  view full answer...
• Does Lock # L1883 Allow Latch Function When Locked?
  I went out to our warehouse to check on the "Junior" Locking Stainless Steel Flush Door Latch # L1883 you asked about. When locked, the latch will allow the spring loaded pin to move and latch into place. So it will allow you to lock the mailbox opening latch without closing it and then when it is closed it will lock so it cannot be opened without the key. It works just like a slam lock for a baggage door.
  view full answer...
• Available Locking Steel Flush Door Latches
  The Redline "Junior" Locking Stainless Steel Flush Door Latch # L1883, which measures 3-5/8-inches tall x 4-3/4-inches wide, is the smallest such paddle type latch we offer. It does not come in black but could painted, although its stainless steel construction means you do not need to worry about corrosion. The similar full-size latch # L3980 has overall dimensions of 4-1/4-inches x 5-1/2-inches. This is raw steel latch that can be primed and painted. We do not offer windows but...
  view full answer...
• Will "Junior" Locking Stainless Steel Flush Door Latch Fit Trailer Door is Correct Hole Size Is Cut
  All you would need to do to install the part # L1883 that you referenced is cut the appropriate sized hole. For this latch you would need a hole that measures 3-5/8" tall x 4-3/4" wide.
  view full answer...
• Can the Junior Locking Stainless Steel Flush Door Latch L1883 Be Keyed Alike
  Yes, the Junior Locking Stainless Steel Flush Door Latch part # L1883 will come keyed alike no matter how many you order. There are not any special prompts or instructions you will need to give in order for this to occur, just enter your quantity in the box on the product page and then proceed to checkout using the "Add to Cart" button.
  view full answer...
• Replacement Locking Entry Door Latches for 1995 Jayco Eagle 230 Travel Trailer
  RV makers like Jayco do not maintain details about smaller parts like door latches that they install on their trailers but we carry such a wide range of such parts we can surely help you with some new locking door latches. Please refer to the page I linked for you; this has all sorts of door latch hardware including popular flush latches like # PLR5115 and # L1883. The things to check are the door's lock opening size, to allow you to select a locking latch of the correct dimensions that...
  view full answer...
• Replacement Keys to Tack Room of 2003 CM 2 Horse Slant Trailer
  The # CHK510 key you mentioned is common to all # L1980, # L1930, # L1883, # L1833, and # L4080 latches. In order to get you the correct key, look on the face of the lock and see if there's a reference number engraved or stamped next to the key slot. That number might help me find you a replacement key, if you can reply and let me know what the number is. Otherwise, if you can provide the dimensions of the rough opening the latches sit in, I can recommend replacement locks for you....
  view full answer...
• 1997 Exiss SX Horse Trailer Door Handle Replacement
  If the hole in your door for the handle measure 2-3/4" x 3-3/4" the # L4080 would work, but most likely you would need a handle like the part # L1883 as that is more like the latching style of your current handle. This latch installs in the same size hole.
  view full answer...
• Installing Flush Mounted Latch on Drawers with 3/4 Inch Face
  The "Junior" Non-Locking Steel Flush Door Latch # N1980 can be welded in place or you can drill the flange for installation with screws as you stated or rivets. If you want predrilled holes and a lock you can use the "Junior" Locking Stainless Steel Flush Door Latch # L1883. These will fit doors or drawer faces up to 7/8 inches thick.
  view full answer...
• Replacement Locking Door Latch for 1994 Wells Cargo Trailer
  I researched circa-1994 Wells Cargo trailers but I could not find any confirmed specs for the particular door latch they used on their various sizes of trailers. Most do use a flush-mount latch like Redline # L3980 and # L1883. You'll need to remove the old latch and measure the opening to find the correct replacement latch. Part # L1883 mounts in an opening that measures 2-5/8 x 3-3/4 and part # L3980 mounts in a hole that measures 3-3/8 x 4-5/8. For the inside knob you can use part...
  view full answer...
• Fitment and Compatibility of Replacement Lock Core for Tack Room on Horse Trailer
  Thanks for your picture. The lock you were looking at is designed by a tool box company, UWS, but it might work for your latch depending on the dimensions. Best thing is to measure. The # UWSLOCKCH501 has a diameter of .626 inches and length from under the lock head to the end of .676 inches when measured with a caliper like # PTW80157. I was able to find a replacement key and tumbler set for a latch lock more like the one in your picture. This new tumbler set # CHKT fits lock models...
  view full answer...
• Availability of Keyed-Alike Lock Cores for Locking Stainless Steel Flush Door Latch
  Locking Stainless Steel Flush Door Latch # L1833 from Redline can be re-keyed with a new tumbler and key set by using part # CHKT. This new tumbler set fits lock models # L1980, # L1930, # L1883 and # L1833. I verified this with my contact at Redline trailer supply.
  view full answer...
• Does Trailer Door Latch L3980 Come Keyed Alike
  If you order 4 of the part # L3980 you will get 4 that use the same key. We do not offer a version that is chrome in this size though. We have the part # L1883 which is a "Junior" size at 2-3/4 x 3-3/4 inch hole size. Both of these flush mount locking door latches use the same key number.
  view full answer...
• Door Latch Recommendation for a Trailer Door with Hole that is 3 inch by 4 inch
  The "Junior" Locking Steel Flush Door Latch part # L1980 that you referenced is designed to fit in a hole that is 2-3/4 by 3-3/4 inch. It would still fit just fine in a hole that is 3 inch by 4 inch. For a chrome finish we also have the # L1883.
  view full answer...

Do you have a question about this Enclosed Trailer Part?