Trailer Horse Pad Screw

See what our Experts say about this Redline Accessories and Parts

• Recommended Screws to Install Horse Trailer Pads
  The PS-8 screws should work very well going into either material you mentioned. The threads are coarse enough that they'll get good hold on the aluminum or the rubber. For best results, you'll want to ensure that as many screws as possible go into the wall support framing behind that aluminum skin for maximum hold.
  view full answer...
• Are Screws the Only Thing Needed To Install a Horse Trailer Pad
  Yes, the Trailer Horse Pad Screw part # PS-8 are all that is needed to install a trailer horse pad like the Horse Trailer Side Pad part # HTP60BK. If you need a different pad size, I have attached our full list of options below.
  view full answer...
• Recommended Screws for the Horse Trailer Pad HTP24BK
  For screws to attach the part # HTP24BK to your horse trailer we recommend the part # PS-8. These screws are 3/4 of an inch long so I would go with a plywood thickness of at least 1/2 of an inch.
  view full answer...
• Hardware to Install the Horse Trailer Side Pad
  The Horse Trailer Side Pad - 60" # HTP1260BK does not come with the hardware needed to install, although we do carry it. All you need is the Trailer Horse Pad Screw # PS-8 and you're set. The screws will install around the edges of the pad to secure it.
  view full answer...
• Installation of Horse Trailer Side Pad
  In order to install the the Horse Trailer Side Pad - 60" # HTP1260BK you just need to screw them in. What you'll need are the Trailer Horse Pad Screw # PS-8 and attach them to the sides of the pad.
  view full answer...
• How Do You Attach Horse Trailer Side Pads # HTP60BK To The Horse Trailer
  We carry Horse Trailer Pad Screws for attaching the horse trailer pads. The part number for the Trailer Horse Pad Screw (Qty 1) is PS-8. The pads are installed in the trailer with the screws directly through the pad and can be secured anywhere it is convenient to the trailer ribs or framing. If you look at the product page of # HTP60BK there is a picture under the customer reviews that will show how the pads are attached to the trailer.
  view full answer...
• Is the 24 Inch Horse Trailer Breast Pad Pre-Drilled
  Horse trailer pad # HTP24BK does not come pre-drilled because then it would limit what and where it could fit. We also recommend trailer horse pad screw # PS-8 to mount the pad. The screws are sold in quantities of 1.
  view full answer...
• Screws to Use for Horse Trailer Side Pads
  We do offer a screw meant for trailer horse pads if you'd rather get them here. It's part # PS-8. It's a #8 x 3/4" screw sold in a quantity of 1, so you can order as many as you like. Be sure you use enough that the pad will stay on.
  view full answer...
• How to Install Redline Horse Trailer Pads
  When replacing your horse trailer pads, be sure to pad all dividers and walls. The pads are constructed of a very durable vinyl sewn over 2" of foam onto rigid cardboard. They stand the test of time and hold up in all climates. There is no need to add additional backing to the pads, but if you choose to do so, you can mount them to 1/4" plywood and then mount them to the walls of your trailer. The pads are surrounded by a 1" border where there is no padding. This is where you will want...
  view full answer...
• How Many Screws Should be Used to Install the Horse Trailer Side Pads part # HTP60BK
  It really is up to you to decide how many pad screws to use to install the Horse Trailer Side Pad # HTP60BK that you referenced, but typically customers use between 12 and 16 screws. The part number for the screws is PS-8.
  view full answer...
• Is There a Height to Install Horse Trailer Breast Pad
  There is not a recommended height to install the Horse Trailer Breast Pad # HTP24BK; you can install them where you think they will be most effective. To install these in your trailer we have Trailer Horse Pad Screw # PS-8 which is a 3/4" #8 screw.
  view full answer...
  
• Comparing Trailer Horse Pad Screws and Self-Taping Screws for Horse Trailer Side Pads
  The Trailer Horse Pad Screw part # PS-8 will work great for attaching Horse Trailer Side Pads like part # HTP60BK. That said, you may need to drill a small pilot hole into the backing first depending on the material. I suppose you could use a standard self-tapping screw like part # 1131832 as well but there is no built-in washer on these and you risk stripping the hole much easier this way as well.
  view full answer...
• How to Attach the Premium Horse Trailer Side Pad to the Trailer Wall
  There is not a specific method for attaching the Horse Trailer Side Pad, # HTP60BK, to the trailer wall. You can use the Trailer Horse Pad Screw, # PS-8, but like you said it will puncture the material. Another option you have is to apply adhesive to one side of the horse pad to attach it to the trailer wall. I would recommend using a strong adhesive that can be purchased at your local hardware store. Be sure the back surface of the pad and the mounting surface of the trailer wall are...
  view full answer...
• Recommendation For Attaching Horse Trailer Side Pads
  For the installation of your 60-inch horse trailer side pads, I recommend using the Trailer Horse Pad Screw # PS-8. The pads are installed in the trailer directly via the screws and can be mounted wherever is convenient. I have included a photo from our page for the 60-inch Horse Trailer Side Pads # HTP60BK showing how these screws are utilized.
  view full answer...
  
• Mounting Screws for Installing Pads in Horse Trailer
  Our horse trailer pad items such as 60-inch Side Pad # HTP60BK and 24-inch Breast Pad # HTP24BK don't come with included hardware because the requirements between different trailers can vary so much depending on the type of material the pads are mounted on. But we do offer a number 8 screw 3/4-inches long that has a finishing washer on it, part # PS-8. If this 3/4-inch length is suitable for your trailer then this is an excellent option. These are sold individually (qty of 1).
  view full answer...
• What Screws Are Needed To Install 60" Horse Trailer Vinyl Pad?
  The Trailer Horse Pad Screw # PS-8 will allow you to install the 60" Horse Trailer Side Pad # HTP1260BK on your steel trailer/divider. This screw is 3/4" long and will require a 1/8" pilot hole on your steel trailer. I recommend using at least 24 screws which will allow you to place them roughly every 6" on center to hold it in place.
  view full answer...
• Horse Trailer Side and Breast Pad Recommendations
  Yes, there was a part number change, and the SP1924 is now the the Horse Trailer Breast Pad - 24 inch, part # HTP24BK, and the SP1960 is now Horse Trailer Side Pad - 60 inch, part # HTP60BK. To attach these pads to your trailer you may also be interested in Trailer Horse Pad Screw (Qty 1), part # PS-8.
  view full answer...
• How to Install Redline Horse Trailer Side Pad HTP40BK
  You may be able to re-cover your existing side pads but by the time you get all the materials to do this (vinyl fabric, glue, staples) it may be more cost-effective to replace them with the Redline Horse Trailer Side Pad # HTP40BK. This black vinyl pad measures 9 x 40 x 2-inches thick and has a cardboard backing and 2-inch thick foam to protect your friends when you're on the road. To install a new pad we suggest #8 x 3/4-inch Horse Pad Screws # PS-8, sold individually. If you need pads...
  view full answer...

Do you have a question about this Accessories and Part?