1. Trailer Parts
2. Trailer Door Latch

Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x…

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the…

Hello Cale, thanks for getting in touch. We do offer some off-road tires but nothing in a 14". Our smallest off-road tire is the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR. The ST235/75R15 tires are…

Thanks for the information Scott! The brake assemblies your Sundowner horse trailer uses are item #23-105 for the left hand and item #23-106 for the right hand. The replacement brake shoe you need is item #AKBRKR-S-12. These are sold individually…

You're welcome Scott! For a 6,000 lbs self adjusting brake assemblies you will want the Dexter Nev-R-Adjust Electric Trailer Brakes item #23-458-459. If you need new mounting bolts and hardware item #BRKH12 will get you set…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Thanks for reaching out, Steve! The Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR will be about 1" closer to any fenders and about 1/2" closer to your trailer frame. Unless…

The Paneloc Slam Latch part #F707-104Z011 was not designed to work with a striker plate so there isn't one available for it.

The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo…

The mounting holes for the Bauer Products Locking Cam Latch #BA32FR are spread 2-13/16" horizontally for the top 2 holes and 3-3/4" from the center line of the top holes to the center of the bottom…

Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x…

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the…

Hello Cale, thanks for getting in touch. We do offer some off-road tires but nothing in a 14". Our smallest off-road tire is the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR. The ST235/75R15 tires are…

Thanks for the information Scott! The brake assemblies your Sundowner horse trailer uses are item #23-105 for the left hand and item #23-106 for the right hand. The replacement brake shoe you need is item #AKBRKR-S-12. These are sold individually…

You're welcome Scott! For a 6,000 lbs self adjusting brake assemblies you will want the Dexter Nev-R-Adjust Electric Trailer Brakes item #23-458-459. If you need new mounting bolts and hardware item #BRKH12 will get you…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Thanks for reaching out, Steve! The Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR will be about 1" closer to any fenders and about 1/2" closer to your trailer frame. Unless…

The Paneloc Slam Latch part #F707-104Z011 was not designed to work with a striker plate so there isn't one available for it.

The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a…

The mounting holes for the Bauer Products Locking Cam Latch #BA32FR are spread 2-13/16" horizontally for the top 2 holes and 3-3/4" from the center line of the top holes to the center of the…