Standard-duty winch with 1.6-hp, permanent magnet motor and mechanical brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Hand-held remote and handlebar rocker mount included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbor, Steven here with etrailer.com. Folks, today we're looking at an Erickson ATV series winch with a synthetic rope and a hawse fairlead rated at 3,500 pounds. Now folks, this is gonna be great as a power sport ATV recovery winch. It's designed for recreation and standard duty work application. So pretty much like a 300 cc to 850 cc utility quad, four by four, side by side, those kind of things. It is recommended for a max weight of 2000 pounds.
It does support a nice 1.8 horsepower permanent magnet motor that's gonna deliver a powerful, fast, safe line pull. The motor is lighter and uses less current than a series wound motor, so the technology just keeps getting better every time, right, and it's been sealed to keep up all water, moisture and those kind of things and prevent internal corrosion. Now, the sealed contactor, our contactor, is gonna transmit power from the vehicle's battery to the winch motor and that'll mount under the ATV's front cover or hood with all the included hardware and everything you see before you. Now the brake is an automatic mechanical brake that holds a hundred percent of the load while yet minimizing winch creep. It is a all steel three stage planetary gear system, and that's gonna provide increased drum speed compared to like a one or two stage model that are out there.
Now the rocker switch here is wired and that's gonna let you control the winch from like the handlebar or the seat of your ATV. It mounts with the included hardware here, so that would go around the handlebar or whatnot, or on maybe like a upright bar if you have a ATV or side by side with like a roof or something on it, or roll cage, maybe, something like that. Now it does have what's called a free spinning clutch. So anyone that's ever used a winch knows pretty much you can make this turn and then basically you could pull out the line by hand without having to use the motor and save the life of the motor. Now this synthetic rope is a 3/16" diameter HMPE synthetic rope.
It's super strong, just as strong as steel, but lightweight and safer to handle. You get 50 feet long with four foot of woven polyester sleeve. You can't see that protective sleeve. It's on the inside underneath all these coils. So if you ever have to go up that far, you'll see the last four feet have a protective polyester sleeve around it.
It does use a one quarter inch steel clevis hook and they give you a hand saver here. So basically you can pull this instead of having to grab that part. All these rubber connector covers go around the ends of the wires when you're wiring it up to both the switch, the solenoid, and the motor itself. Everything here is nice heavy duty steel with a clear anodized finish to prevent corrosion. And the mounting channel hardware is also included in that bag of hardware and that's gonna also let you mount the winch fairlead and the winch itself when you're doing your install. Now as far as the bolt mounting here, center to center, it is three inches. And then if you went long ways, it's 4-7/8" center to center. And that also matches up with the mounting plate here. Now the winch weight with the rope installed is about 22 pounds. It's about 21.82, but close to 22 pounds. They recommend a battery size of 650 cold cranking amps and that's basically gonna give you the maximum power with this winch. It has a gear ratio of 171:1, and the line speed is about 6-3/8 feet per minute and it runs on 12 volts of DC current. Well folks, that's gonna wrap it up for our quick look at this Erickson winch with a synthetic rope. I'm Steven, thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.