Superwinch Terra 45 ATV Winch - Wire Rope - Roller Fairlead - 4,500 lbs

Part Number: SW1145220

54 Reviews | 25 Questions

In Stock

$443.99

Retail:$555.00

You Save: $111.01

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

superwinch electric winch planetary gear plug-in remote sw1145220

superwinch electric winch 21 - 30 lbs plug-in remote sw1145220

superwinch electric winch atv - utv 21 30 lbs terra 45 wire rope roller fairlead 4 500

superwinch electric winch atv - utv plug-in remote terra 45 wire rope roller fairlead 4 500 lbs

superwinch electric winch atv - utv planetary gear

superwinch electric winch atv - utv 21 30 lbs sw1145220

superwinch electric winch atv - utv plug-in remote

superwinch electric winch planetary gear 21 - 30 lbs

superwinch electric winch atv - utv planetary gear terra 45 wire rope roller fairlead 4 500 lbs

Show All (24) Product Images

Show Fewer Product Images

In Use/Installed

0 electric winch superwinch atv - utv 21 30 lbs terra 45 wire rope roller fairlead 4 500

0 electric winch superwinch atv - utv plug-in remote in use

2014 polaris ranger crew 570 electric winch superwinch atv - utv plug-in remote terra 45 wire rope roller fairlead 4 500 lbs

2014 polaris ranger crew 570 electric winch superwinch planetary gear plug-in remote sw1145220

2014 polaris ranger crew 570 electric winch superwinch atv - utv plug-in remote in use

2014 polaris ranger crew 570 electric winch superwinch atv - utv 21 30 lbs sw1145220

2014 polaris ranger crew 570 electric winch superwinch atv - utv planetary gear terra 45 wire rope roller fairlead 4 500 lbs

0 electric winch superwinch atv - utv planetary gear terra 45 wire rope roller fairlead 4 500 lbs

0 electric winch superwinch atv - utv plug-in remote terra 45 wire rope roller fairlead 4 500 lbs

0 electric winch superwinch planetary gear 21 - 30 lbs sw1145220

0 electric winch superwinch atv - utv planetary gear in use

0 electric winch superwinch 21 - 30 lbs plug-in remote sw1145220

0 electric winch superwinch planetary gear plug-in remote sw1145220

2014 polaris ranger crew 570 electric winch superwinch atv - utv planetary gear in use

2014 polaris ranger crew 570 electric winch superwinch 21 - 30 lbs plug-in remote sw1145220

2014 polaris ranger crew 570 electric winch superwinch planetary gear 21 - 30 lbs in use

Show All (31) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Superwinch Terra 45 ATV Winch - Wire Rope - Roller Fairlead - 4,500 lbs customer photo

Show All (21) Customer Images

Show Fewer Customer Images

Videos

Superwinch Terra Series ATV Winch Installation- 2014 Polaris Ranger

Ultimate Overview of the Superwinch Terra 45 ATV Winch

Review of Superwinch Electric Winch - ATV - UTV Winch - SW1145220

Show All (3) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

The fully sealed Terra winch is built to handle all your ATV work and recreation activities. It has a heavy-duty, 1.6-hp motor; free-spool clutch; 55' wire rope and roller fairlead; hand-held remote; and a rocker switch for in-seat winching. 1-800-940-8924 to order Superwinch electric winch part number SW1145220 or order online at etrailer.com. Free expert support on all Superwinch products. Great prices and Fastest Shipping for Superwinch Terra 45 ATV Winch - Wire Rope - Roller Fairlead - 4,500 lbs. Electric Winch reviews from real customers.

All Info
Reviews (54)
Q & A (0)
Related Parts
Photos

Superwinch Electric Winch - SW1145220

Features:

High-performance ATV winch is designed for heavy-duty recreation and work-duty applications
- Completely sealed from motor to clutch - keeps out water, mud, snow and dust
Sealed, 1.6-hp, permanent magnet motor delivers quick, safe line pulling
- Pulls more weight longer and faster and with lower amp draw than comparable winches
Rubber, hand-held remote with 10' long cord lets you operate the winch from a safe distance
- Toggle switch on remote powers load in and out
- Remote socket can be mounted in a remote location such as your ATV handlebars
Handlebar-mounted rocker switch lets you operate the winch from the seat of your ATV
- Mounting bracket, screws, and locknuts included for installation
Ergonomic free-spool clutch knob ensures fast rope payout
1/4" Diameter wire rope is strong and durable - 55' long
- Includes a removable latched hook with clevis pin and nylon hand-saver strap
- Mounts over an all-steel drum
Stainless steel, 4-way roller fairlead protects the wire rope from damage by reducing strain and rubbing
- Includes mounting plate
Automatic, 100-percent load-holding mechanical and dynamic brake provides complete rope control
Remotely mounted solenoid is sealed for protection in all weather conditions
Differential, 3-stage planetary gear train with oversize, full-metal gears provides strong yet quiet operation
Heavy-duty textured finish stands up to even the harshest conditions
Color-coded wiring and circuit breakers included for installation

Specs:

Rated line pull (with a single layer of wire rope around the drum): 4,500 lbs (static load)
Motor: 12-volt DC
- Line pull at 0 lbs:
  - Power draw: 21 amps
  - Line speed: 15 FPM
- Line pull at 4,500 lbs:
  - Power draw: 178 amps
  - Line speed: 5.5 FPM
- Maximum continuous run time: 2 minutes
Gear ratio: 191:1
Braking: 100-percent-load-holding dynamic and mechanical
Winch dimensions: 15.1" long x 4.5" wide x 4.8" tall
Rope dimensions: 55' long x 1/4" diameter
Drum dimensions: 2" diameter x 4.9" long
4-Bolt mounting pattern: 3" x 4.87"
Winch weight: 22 lbs
3-Year limited warranty on electrical components
Lifetime warranty on mechanical components

1145260 Super Winch Terra 45 All Terrain Vehicle Winch - Wire Rope - Roller Fairlead - 4,500 lbs

Replaces 1145220

4.7

54 reviews

5 Stars		(45)
4 Stars		(6)
3 Stars		(1)
2 Stars		(2)
1 Star		(0)

by: Jeff 03/20/2019

Because of battery location on my kubota 1140, I had to improvise on installation of the battery cables. All worked out well. Was able to route the cable through the frame so no chance of anything snagging it.
Bolts seemed too short in mounting the winch so I opted to buy bolts a bit longer and higher strength grade. I’m a firm believer in overkill. Also opted to use a momentary switch that fits in the knockout on the dash for a cleaner look. Manufacturered a small mounting plate for the remote plug to install by the winch for convenience when rolling up the cable.
After all was done, winch works great and I was able to utilize pretty much everything that came with the kit. Great price, good product and fast shipping! A+++.

Click to Enlarge

Jeff One Year Later

3/21/2020

Winch is still working great with no problems. Used it to pull myself across a wash out. Winch pulls strong!

by: Reno Hinckley 10/13/2023

This winch appears to be well contructed as it is supposedly made in the USA. It came neatly packaged with all the terminals color-coded to make installation fool-proof. I ran in to trouble when I used the fairlead mounting plate to mark the mounting holes to drill in the trailer mounting plate only to discover that the holes in the fairlead mounting plate do not line up with the threaded blind holes in the base of the winch. This resulted in considerable work in elongating the holes in both the fairlead plate and the trailer mounting plate (which is 1/2" steel plate) with a rat-tail file in order to get it mounted. Also, the electrical connection instructions are wrong - it states to connect the blue lead from the remote switches to the black lead on the conductor - this is completely wrong and confusing. The right way is to connect the black lead on the remote switch to the black lead on the conductor and the blue lead to the blue wire on the connector. In addition, the terminal rings on the battery cables are 2mm too small requiring me to drill out the holes in order to connect them. Other issues are that while I was told that this was suitable for winching a car onto an enclosed car trailer, it winches much more slowly than the X3 Superwinch it replaced and stopped 8" short of the e-track stop points for some reason - maybe the motor overheated. I let it cool down a bit and it drew the car in fully. I'm inclined to return this and get a bigger winch.

Click to Enlarge

Heather A.

10/23/2023

Hey Reno, there is a lot to say about this winch. If you are using your mounting plate from the Superwinch X3 it will require some filing because the mounting pattern is different. However, the fairlead should have lined up with the holes of the winch. That does sound like a quality control issue on Super winch's part. I can reach out to their quality control to find out what happened there so thank you for letting us know. The Superwinch Terra has the same motor as the old X3 but the weight capacity of this winch is actually more compared to the X3. I can see why the wiring diagram in the instructions is misleading but the blue to blue and black to black wiring that you mentioned is correct. The Superwinch Terra motor does have a 2 minute run time so it may be possible the motor is overheating and needs to cool down before it can pull your vehicle all the way into the trailer. It also has a 4,500 static load so if you are trying to winch a larger SUV or truck you may need more weight capacity. As far as the speed, it should be pulling the vehicle at a 5-1/2 foot per minute speed. Please let me know if it's not doing that and we can continue troubleshooting. Some of the common reasons for a slower moving winch are: the battery is weak or a weak ground connection. I know this seems like common sense but sometimes we miss these things! If you are looking to go with something with more weight capacity and more horse power, I recommend the one of the S Series Superwinch like part # SW1475201 this one will give you a 7500 lb line pull capacity and a 3.6 hp motor. Although you are looking at a higher price point.

by: James D. 07/03/2018

I can’t say enough about etrailer and the staff. They are top notch people to deal with. This review is on the Superwinch Terra 4500 wire rope, Superwinch custom fit mounting kit and Bulldog dash mount rocker switch. Installation on my 2017 Polaris Ranger XP1000 EPS, 3 passenger, single cab. I will try to attach pictures of front mounting plate, winch, wire routing and etc. The Superwinch mounting plate and winch assembly fit was an easy install. Decided to route winch wiring, wiring from winch remote cable and Bulldog dash mounted rocker switch down and back through the tunnel of the Ranger where there was existing wiring and coolant tubes and secured all wiring. I mounted the winch solenoid in the center bay beneath the center passenger seat where the ECM and fuse box and relay center is located. That put the solenoid in a dry location and made a good install. The circuit breakers w/cover are neat the battery as pictures show. Winch remote connector on left side of upper dash and Bulldog rocker switch to the right of existing dash switches. Received the etrailer order on Wednesday June 25th, started install on Friday the 27th and finished on Saturday the 28th after deciding on how I wanted to route all wiring. The Superwinch works like a charm, rocker switch and remote function great. Installation is clean and I hope the pictures show what a neat installation this was. Dealing with etrailer is always a good experience and I will be back. Now I’ll try to include pictures.

Click to Enlarge

by: Eric 04/18/2020

This is a review for the superwinch Terra 45. I had a couple issues when installing this winch but Westin Automotive (parent company) was outstanding in their customer service. I didn't have to wait long and they were extremely helpful sending me a replacement part overnight shipment free. I called more than once and they were great every time! Love the winch too!

Click to Enlarge

by: Butch 07/05/2020

Brand new but so far, so good. Mounted to a receiver hitch so it can be used and removed from prying eyes when not being used. Simple to install. Used to pull "rolling stock" up onto trailer in a straight line pull. Rolling stock only. No problem.

Butch One Year Later

7/6/2021

Great. When I need it, it works.

by: Edward A 06/27/2019

Superwinch arrived intact despite sent in mfg box. Superwinch mounted on my Polaris Ranger has been great. Expect this one to also be great.

Edward A. One Year Later

6/28/2020

Still working great. Modified the Ranger mount to accept it.

by: Brian 04/13/2018 One Year Later

So far so good one year later. I have it mounted on a 16’ car trailer, only pulled up 2 sedans with it with aired up tires. I don’t expect it to pull cars with flat tires, but aired up it does just fine. No complaints here good winch! Does it’s job

by: DG 03/22/2018

After deciding which winch I wanted the search to find the most inexpensive led me to etrailer. Im quite pleased with every aspect of the deal, Thank You

Dg One Year Later

3/22/2019

My superwinch has got me out of lots of situations, works great, every time. No regrets

by: Keith Steele 08/15/2015

I recently installed a 4500 lb super winch on.our.2015 Polaris 900 crew,installation was a breeze,I was concerned the 6gua.wire would be to short for the crew but they made.it to.the battery comp.just fine! I would recemend e-trailer for there service and price and superwinch for an awesome winch.at an.affordable price.

by: Roland Brant 10/18/2018

SuperWinch 45 arrived as advertised and on the promised delivery date. This is a direct replacement winch so I know it is good quality. Good shopping experience. Had two failed attempts with two other vendors on same item.

by: APK 11/23/2016

Easy install in my 16 Ranger 900 XP all the hardware and wiring was spot on for install. Great product recommend it to everyone. Wish u would of found this site sooner.

by: hutcho 03/16/2017

I have not wired it up yet but it mounted onto my 590i gator nicely.

Hutcho One Year Later

3/25/2018

I havent needed to use the winch yet but it looks good on my 590i.

by: Gary 03/16/2025

Thank you for your guidance and advice!

by: Rick 01/05/2021

The best price I could find, quickest delivery ever,definitely be buying more products from them

by: Annette 07/04/2019

Just what we needed! Fast and excellent service and delivery!

by: Susan 03/02/2020

Amy was a pleasure to work with.

by: Ron 12/31/2020

Excellent service

by: Nathan 11/10/2025

by: Tony 07/08/2021

by: Christopher 01/02/2022

Everything about the winch seems well made. The extensive use of cast iron gives confidence to the quality of construction. It has all the useful features I need, especially the remote switch. The wires supplied were soft and pliable.

I used a few 4x4s across the front of the trailer bed to raise up the winch so that the cable can reach 12 feet to the rear. The 4x4s are bolted from the top and down through the bed frame with a single threaded rod, and also vertically to the railing, at the ends. The railing is further supported by chains to the front hitch. The chain can be loosened easily and dropped down so that I can climb over the hitch easily.

I modified a 1/4” piece of steel boiler plate to mount to the front rail and top 4x4, PICTURE 1. The steel boiler plate is secured at all 4 corners. The winch mount plate, PICTURE 2, is sandwiched between the steel boiler plate and the winch and held to the winch by 4 bolts, shown in PICTURE 3. This becomes one single assembly, held to the trailer by 4 nuts, and easily removed when not in use. PICTURE 4 shows the mounting studs for the winch assembly. In PICTURE 5, the releasable and turnbuckle chains help to take the stress off the front rail of the trailer. A common use for the winch would be for small tractors up to 1500 pounds.

My van has existing #2 wire coming from the battery for a winch inside the van. It was a matter of tapping into that for the relay and installing a 60amp receptacle for a plug. The winch is plugged into the receptacle, something I’ve done with my existing van winch without any trouble.

I will always store the winch inside my van, but allowing it to be unplugged and stored in the garage is another plus.

Click to Enlarge

by: Brian 10/15/2019

This is the best winch I've ever had, I installed it on a 17 Honda Rubicon with a strongmade bumper, looks good and pulls great and etrailer has fast shipping and great customer service.

Click to Enlarge

by: Phillip 03/17/2026 One Year Later

Quality winch has been working great for over a year now with no issues!

Mike L.

3/17/2026

We're happy to hear that, Phillip! Thanks for checking in...

by: Larry 04/02/2018

Thank you George for your support this terra winch is going to get a work out on this polaris work horse. I relocated the battery to assist winch plus your winch mount installation was easy.

Click to Enlarge

by: Erik B. 06/26/2017

I purchased the 2,500 pound terra recovery series winch, and custom fit ATV winch mounting kit on june 19th. I received both products on June 21st. The customer service during the order placement and and shipping was outstanding. They called me just to verify that my order had been placed, was being pulled, and would ship that day. The instructions were easy to follow, and with the supplied hardware everything mounted exactly like it should have. The wiring instructions were a little harder to follow. The mounting procedure for the rocker switch, solenoid, and circuit breaker could have been a little more detailed. Especially when it came to which hardware to use to install those pieces. Also the red and black 6 GA wires were not long enough to reach my battery from the position I had to mount the solenoid. That is the reason I only gave 4 stars. Overall though, it was a great experience, I will be recommending this site to the people I go riding with. Thanks etrailer!

Click to Enlarge

by: Ken I 08/28/2023

Fairly east to install on my 2023 Honda Pioneer 500.
Bought the KFI winch mounting plate. The winch is well made but...
When using the included bolts to mount the winch, the included winch fairlead plate and the KFI mount, the included bolts are to short. So you need to track down the grade 8 metric bolts 1/4 inch longer. When doing the electrical hook up, the wiring from the battery to the winch solenoid is about 3 feet to short when hooking up on the Pioneer 500. More searching and buying of STUFF that should be included. Other than that a pretty easy install.

Ken I. One Year Later

8/29/2024

Perfect. No problems. Have not really had to work it hard, but, they t times in have used it, it worked flawlessly.

true

Show More Reviews

See what our Experts say about this Superwinch Electric Winch

Do you have a question about this Electric Winch?

What Would Cause Superwinch Terra Winch To Bunch Cable Up
Hey Paul, when a Superwinch Terra like what you have is bunching up that usually means there's just not enough tension in the line pulling the cable straight which then allows it to get all bunched up and create a "birds nest". Is there much tension in your line currently?
view full answer...
Winch Mount for Terra 45 for Easier Install/Removal from Vehicle Hitch
For your application a winch mount like the Bulldog part # BDW20011 would be what I would recommend. This is compatible with the Terra 45 winch and since it has large handles on either side will make for an easier to installing and removing from your hitch as needed.
view full answer...
Rocker Switch Wiring for a Superwinch Terra Series ATV Winch
The replacement rocker switch for the Superwinch Terra Series ATV Winch part # SW1145220 is the Replacement Controller for Superwinch Terra Series ATV Winch part # SW87-42609. I have attached the wiring diagram of this rocker switch for you as well.
view full answer...
Solution for Easily Removable Winch for Car Hauler
Using a hitch opening like the Bulldog # BDW20154 like you referenced would be a great place to start. You'll mount this in the bed of your car hauler so that you can use a hitch mounted winch carrier like the # BDW20011 which will allow you easily remove the winch when not in use. For a winch a 4,500 lb ATV winch like the # SW1145220 would work great. It's a little smaller but has the needed capacity.
view full answer...
Recommended Synthetic Rope For Superwinch To Replace Steel Cable
I called my contact at Superwinch and asked about changing the steel cable on your 4500 series winch to a synthetic rope. My contact said it can be done if the winch you have is the Terra Series but it cannot be done if the winch you have is the S series winch. If you have the Terra series winch like part # SW1145220, the replacement rope I recommend is part # BDW20185. This rope measures 4.8mm x 50-ft and has a capacity of 3,500-lbs.
view full answer...
Do Different Winches Share Common Mounting Hole Patterns Like Superwinch Terra ATV Winch # SW1145220
The winch you referenced, Superwinch Terra Series ATV Winch # SW1145220, has a 4-bolt mounting pattern for the winch that measures 3- x 6.66-inches on the hole centers. This is common to their other ATV winches such as # SW1125230. Please refer to the linked video. The winch mounts themselves are vehicle specific. For example, Superwinch Mount 2202863 fits various model years and versions of the Polaris Sportsman. You can find a suitable winch mount for your ATV or other vehicle by entering...
view full answer...
Can a Synthetic Rope Be Used With a Roller Fairlead Superwinch Terra 45 Series
For your Superwinch Terra 45 Series ATV Winch part # SW1145220 you will want to use a hawse fairlead like part # BDW20089 for winches with a synthetic rope. You can still technically use a synthetic rope with a roller fairlead like the Roller Fairlead part # BDW20055 but it is not recommended as you run the risk of the rope getting pinched in the corners of the rollers and becoming damaged. In order to reduce abrasion on a synthetic rope you will want to use a hawse fairlead which is...
view full answer...
Quick Connect Wiring Harness for a Superwinch 4,500K Electric ATV Winch
In order to install a quick connect winch wiring harness on both the front and rear of your 2016 John Deere Gator 825i, I recommend using the Bulldog Winch Wiring Kit part # BDW20205. You will need 2 harnesses, 1 for the front of the ATV and 1 for the rear of the ATV. The harness wires directly to your battery and can support winches up to 95 amps which is more than enough for the 21 amp rating of the Superwinch Terra Series ATV Winch part # SW1145220. Each cable end on the wiring harness...
view full answer...
How Long Can the Superwinch # 1450200 Run Before Needing to Cool Off
I checked with Superwinch and for the winch part # SW1145220 they state Remember, the winch is for intermittent use only. During long or heavy pulls the motor will get hot. For pulling at rated capacity, allow motor to cool after 20 seconds of “On” time. At loads less than 50% of rated capacity, allow to cool after 2 minutes of “On” time. KEEP THE ENGINE RUNNING TO RECHARGE THE BATTERY during this break.
view full answer...
Can ATV Winch Solenoids get Exposed to Water
In general you want to try to keep winch solenoids away from being exposed to the elements but they are designed for use on ATVs which come in contact with water pretty regularly so if it were to get splashed crossing a creek or while washing the ATV it would be fine.
view full answer...
Winch Mount for Superwinch Terra 4500 on 2015 Honda Pioneer 700-4
I'd recommend the Bulldog winch # BDW15180 for your Superwinch Terra 4500. The # BDW15180 mount provides standard hole spacing, and provides mounting holes to attach a roller fairlead for winch cable or a hawse fairlead for synthetic rope. I've linked to a product description video for the winch mount.
view full answer...
Would Superwinch Terra 4500 lb ATV Winch Work in the Bed of a Ford F250 to Pull a Quad into the Bed
I spoke with my contact at Superwinch and he informed me that the Superwinch Terra 4,500 part # SW1145220 that you are installing will work to pull your golf cart and quad into the bed of your truck and is compatible with the Winch Trailer Wiring kit part # BDW20307.
view full answer...
Winch Recommendation for a Car Hauler for Loading Up Cars
Yes, since the vehicles you would be winching on your car hauler are a rolling load a winch like the part # SW1145220 which has a 4,500 lb capacity would work well. Even if you ramps had a 60 percent angled ramp this winch could pull up to 7,488 lbs.
view full answer...
Winch Mount Recommendation for a 2002 Yamaha Kodiak
For your 2002 Yamaha Kodiak the Bulldog Winch mount part # BDW15128 has been confirmed as a fit so it would work great. This would work well with the Superwinch Terra # SW1145220 that you also referenced.
view full answer...
Winch Mount Plate Recommendation for a 2016 Polaris Ranger Crew 900
For a winch mount confirmed to fit your 2016 Polaris Ranger Crew 900 to install the Superwinch part # SW1145220 you would need the part # BDW15174. The part number you mentioned has been discontinued.
view full answer...
Compatibility of Superwinch Terra 4500 Winch with Bulldog ATV Winch Mount BDW15113
The winch you referenced, Superwinch Terra Series ATV Winch # SW1145220, has a 4-bolt mounting pattern for the winch that measures 3- x 6.66-inches on the hole centers. This hole pattern is compatible with the Bulldog Custom-Fit Steel ATV Winch Mount # BDW15113.
view full answer...
Can Superwinch Terra 45 Load and Unload Car from Enclosed Trailer
Yes, the Superwinch Terra 45 part # SW1145220 can be used to load and unload a car from an enclosed trailer.
view full answer...
Required Winch Capacity for 2500-lb Boat Pulled on Ramp with Rollers
If your boat is on a dolly-like platform that is equipped with rollers its actual load that will be presented to the winch will be reduced as compared to use of standard non-wheeled bunks. For a 2500-lb boat the 4500-lb-rated Superwinch Terra Series ATV Winch # SW1145220 with 55-foot wire rope will be capable of handing this load. You can refer to the linked article for more on the things that determine the required winch capacity for various kinds of applications.
view full answer...
Winch and Winch Mount Recommendation for a 2012 Polaris RZR 900 Ranger
For your 2012 Polaris RZR 900 Ranger the correct winch mount would be the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15167. If you are looking for a great winch to work with this vehicle, I recommend the Bulldog Winch Powersports Series UTV Winch # BDW15004 because it will provide the power and performance you desire at a great price point. I've attached a video review of this winch to give you more details on this customer favorite.
view full answer...
Winch Mount Recommendation for a 2014 Honda Four Trax Foreman 500
The correct winch mounting plate for your 2014 Honda FourTrax Foreman 500 is the # BDW15181.
view full answer...
Compatibility of Superwinch Terra 4500 Winch with Mounting Kit SW2202919 on 2016 Polaris Ranger
The Superwinch ATV Winch Mount SW2202919 is indeed the correct kit for your 2016 Polaris Ranger 900XP. This winch mount is compatible with all of the Terra Series winches, including the Terra 3500 # SW1135220 and the Terra 3500 SR # SW1135230 AND the Terra 4500 # SW1145220. I confirmed compatibility with my contact at Superwinch. The kit includes mounting brackets, hardware, and instructions to ensure easy installation.
view full answer...
Winch and Mount Recommendation for a 2014 Honda TRX 500 Foreman
For your 2014 Honda TRX 500 Foreman the winch mount you would need is the part # BDW15181. This mount would also work well with the Superwinch Terra # SW1145220.
view full answer...
Does Superwinch Terra 45 ATV Winch Have Power Out as well as In
Yes, the Superwinch Terra part # SW1145220 does have a power out as well as a power in so it can let a car out of a trailer in a controlled manner like you mentioned.
view full answer...
Synthetic Rop Superwinch Terra 45 that Can Be Used with 2016 Polaris RZR XP 4 Turbo
We have the custom winch mount part # BDW15182 which is a fit for your 2016 Polaris RZR XP 4 turbo that you can then use with the synthetic rope Superwinch Terra ATV Winch # SW1145230.
view full answer...

< Previous

Next >

Do you have a question about this Electric Winch?

Info for this part was:

Test Fit:

Joe V

Test Fit:

Randy B

Expert Research:

Mike L

Expert Research:

Jameson C

Expert Research:

Adam R

Written by:

Tyler C

Video by:

Joshua S

Video by:

Kathleen M

Video Edited:

Jacob T

Video Edited:

Andrew L

Installed by:

Steven C

Updated by:

Wilson B

Updated by:

Matthew S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.