ComeUp Cub 2 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs

ComeUp Cub 2 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs

Item # CU122392

lowest price pledge


Our Price: $179.95

You Save: $40.00
Electric Winch

This item qualifies for Free Shipping

Shipping Weight: 22 lbs

In Stock, Ships Today
ComeUp Wire Rope Electric Winch - CU122392
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

  • ATV - UTV Winch
  • ComeUp
  • 2000 - 2500 lbs
  • Wire Rope
  • No Remote
  • Medium Line Speed
  • 1.0 HP
  • Load Holding Brake
Light-duty winch with 0.8-hp, permanent magnet motor lets you quickly and safely recover a stuck ATV. Sealed design ensures winch operates in any environment. Dual brakes offer reliable load holding. Handlebar rocker switch included. Call 800-298-8924 to order ComeUp electric winch part number CU122392 or order online at Free expert support on all ComeUp products. Guaranteed Lowest Price and Fastest Shipping for ComeUp Cub 2 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs. Electric Winch reviews from real customers.

  • All Info
  • Reviews (3)
  • Q & A (1)
  • Videos (3)
  • Photos
  • Why etrailer?

ComeUp Electric Winch - CU122392

Light-duty winch with 0.8-hp, permanent magnet motor lets you quickly and safely recover a stuck ATV. Sealed design ensures winch operates in any environment. Dual brakes offer reliable load holding. Handlebar rocker switch included.


  • ATV recovery winch is designed for recreation and light-duty work applications
    • Perfect for 250cc - 350cc sport quad 4x4s, 2-wheel drive ATVs, and snowmobiles
    • Recommended for ATVs with a maximum GVW of 1,000 lbs
  • 0.8-hp, Permanent magnet motor delivers fast and safe line pulling
    • Motor is lighter and uses less current than a series-wound motor
    • Sealed to keep water out and prevent internal corrosion
  • Sealed and submersible 250-amp contactor transmits power from vehicle battery to winch motor
    • Water- and weather-resistant to IP68 specifications
    • Mounts with included hardware under ATV's front cover or hood
  • Automatic mechanical and dynamic brakes ensure reliable load holding
    • Mechanical spring brake creates resistance on drum to stop rotation and hold the load
    • Dynamic brake uses resistance from motor to stop drum rotation
  • All-steel, 3-stage planetary gear train
    • Provides increased drum speed when compared with worm drives and 1- or 2-stage planetary gear trains
  • Rocker switch lets you control the winch from the seat of your ATV
    • Switch mounts to handlebar with included hardware
    • Wireless remote control (CU881286 - sold separately) available
  • Free-spooling clutch ensures fast rope payout and reduces wear on the motor
  • 3/16" Diameter wire rope is strong and abrasion resistant
    • 50' Long galvanized steel cable
    • 1/4" Forged steel clevis hook and nylon hand-saver strap included
  • Heavy-duty, compact roller fairlead
    • 4 Steel rollers reduce friction and wear on the rope
    • Black anodized finish resists corrosion
  • Mounting plate (sold separately) may be required to mount winch and fairlead to your ATV
  • Durable, gray powder coated steel body and motor resist corrosion
  • Tie-bars and side frames help to create a strong and rigid winch body


  • Rated line pull (with a single layer of wire rope around the drum): 2,000 lbs (static load)
    • Maximum recommended ATV GVW: 1,000 lbs
  • Motor: 12-volt DC
    • Line pull at 0 lbs:
      • Power draw: 25 amps
      • Line speed: 22-3/16 FPM
    • Line pull at 2,000 lbs:
      • Power draw: 150 amps
      • Line speed: 6-1/2 FPM
  • Gear ratio: 103:1
  • Duty cycle: S3 5% (approximately 44 seconds on/14 minutes off)
  • Braking: 100-percent load-holding mechanical and dynamic
  • Battery lead wire: 6 gauge
  • Battery lead length: 6'
  • Rope dimensions: 50' long x 3/16" (4 mm) diameter
  • Winch dimensions: 11-1/8" long x 3-7/8" wide x 4-5/8" tall
  • Drum dimensions: 1-1/2" diameter x 3" long
  • Distance between roller fairlead mounting holes (center to center): 4-7/8"
  • Winch weight (with wire rope installed): 14.3 lbs
  • Recommended battery size (for maximum power): 550 CCA
  • Warranty:
    • Limited lifetime on mechanical components
    • 1-Year on electrical components

Come Up Winch ATV Series

This Cub 2 ATV recovery winch is designed for light-duty work and recreational applications. It's perfect for your 250cc - 350cc sport quad 4x4, 2-wheel drive ATV, or snowmobile with a maximum GVW of 1,000 lbs. The handlebar-mounted rocker switch lets you control the winch from the seat of your ATV. The motor, gearbox, and contactor are sealed for water resistance. The winch also includes dual brakes to ensure reliable load holding, a wire rope, and a roller fairlead.

Light-Duty, 0.8-Horsepower Motor

Come Up Winch ATV Series motor

This winch features a 0.8-horsepower, 12-volt DC motor with 2,000 lbs of line pull. The permanent magnet motor offers the same line-pulling power and speed as a series-wound motor of comparable size, but it's lighter and uses less current. The motor is sealed to keep out water, and it's constructed of durable, corrosion-resistant materials including the powder coated housing, copper battery terminals, and zinc-plated steel hardware.

Sealed Contactor

Come Up Winch ATV Series contactor

The contactor transmits power from the ATV's battery to the winch motor and to the handlebar-mounted rocker switch. It will typically be mounted with included hardware under the ATV's front cover or hood near the battery.

The 250-amp contactor is sealed to meet IP68 specifications for water and weather resistance. The copper terminals and carbon steel hardware are also corrosion resistant.

Free-Spooling Clutch

Come Up Winch ATV Series clutch

The free-spool clutch enables you to pull out the rope by hand. This saves battery power, prevents the brake from wearing down prematurely, reduces wear on the motor, and is much faster than waiting for the drum to power out the rope. To release the clutch for free-spooling simply rotate the red plastic lever to the disengaged position indicated on the label. To reengage the clutch, rotate the lever to the engaged position.

The clutch is driven by a 3-stage planetary gear train. This provides more speed than traditional worm gear drives or 1- or 2-stage gear trains.

Automatic, Load-Holding Mechanical and Dynamic Brakes

This winch includes both a mechanical brake and a dynamic brake. This dual braking system provides a physical brake inside the drum and supplemental braking force generated by the winch motor. The 2 brakes operate simultaneously to ensure more reliable load holding when compared with single-brake ATV winches.

The automatic mechanical brake securely holds a load and prevents unintentional payout (or creep). When the winch motor is stopped, a large spring coil inside the drum expands to press against the spring chamber. The pressure of the spring on the wall of the spring chamber creates resistance that prevents the drum from rotating. This spring contracts when the winch is in gear to allow the drum to rotate.

When the winch is pulling the rope in or paying it out, the motor is not applying resistance to the drum. When you stop powering the rope in or out, the dynamic brake uses resistance from the motor to help hold the load.

Handlebar-Mounted Rocker Switch

Come Up Winch ATV Series rocker switch

The handlebar-mounted rocker switch lets you operate the winch from the seat of your ATV. It includes mounting hardware and an 8' wiring harnesss with quick connects. There is also a wireless remote kit (CU881286 - sold separately) that lets you control the winch from up to 100' away.

Wire Rope

ComeUp Winch wire rope

The wire rope is made of high-strength, aircraft-grade galvanized steel that resists abrasions and is able to withstand harsh UV rays, chemicals, and extreme temperatures.

The rope winds around a die-cast aluminum drum. The mounting flanges are strong enough to resist bending or breaking if the rope wrap becomes uneven and excess stress is put on the drum.

A hand-saver strap is included to use in conjunction with work gloves (CU881558 - sold separately) so that you can safely handle the rope and hook. A rock bag (CU881557 - sold separately) is also recommended for added protection. The rock bag helps prevent a broken rope from snapping back if it breaks by forcing it to the ground.

ComeUp Winch steel hook

The removable steel hook is made of high-strength forged steel that is heavy duty and rust resistant. It has a spring-loaded safety latch for quick fastening and removal. The hook attaches to the steel thimble on the end of the wire rope.

Roller Fairlead

Roller Fairlead

The roller fairlead has a thick steel frame with 4 steel rollers. The rollers reduce friction when you're pulling the rope in or paying it out, and they prevent the rope from becoming pinched when pulling at extreme angles. It has a black powder coat finish and zinc-plated rollers that are tough and corrosion resistant. The fairlead installs with the included steel hardware.

Note: The roller fairlead does not mount directly to the winch - it typically attaches to tabs on the ATV base plate (sold separately) or custom mounting plate (sold separately). ComeUp mounting plates and most aftermarket mounts include these tabs.

Rugged Construction

Come Up Winch ATV Series construction

The winch is constructed of strong, durable materials that are able to withstand any weather condition or terrain. The contactor is sealed and submersible. The motor and gearbox units are made of corrosion-resistant powder coated steel, and they are sealed to keep water out. The steel tie-bars and extra-thick side frame drum supports help to create a strong and rigid winch body.


To install the winch on the front of your ATV you will need a suitable mounting location. In most cases you will need to bolt a custom mounting plate (sold separately) to the front framework of your ATV in order to mount the winch and fairlead. If you have a mounting plate that does not have tabs for your fairlead you can bolt the winch and fairlead to a base plate (CU880232 - sold separately), then bolt the base plate to your mounting plate.

Come Up Winch ATV Series

The contactor will typically mount under the front cover or hood near the battery. You will need to drill 2 small holes in the mounting surface to secure the unit with the included hardware. Black and red leads connect your vehicle's battery to the contactor, blue and yellow leads connect the contactor to the winch terminals, black and green leads connect the contactor to the rocker switch, and a red lead connects the rocker switch to the ATV master switch. The leads have quick connectors that make removing and re-installing the winch easy. Any excess wiring can be neatly tucked around the engine and secured with zip-ties (not included).

You can mount the rocker switch on either handlebar but it's typically mounted near the brake on the handlebar opposite the throttle. This allows you to control the winch and accelerate the ATV at the same time. It includes mounting hardware and an 8' wiring harnesss with built-in quick connects.

Winch Line Pull Capacity

Layers of RopeCapacity (lbs)Total Rope on Drum (ft)
1st Layer2,0007-7/8
2nd Layer1,68017-1/2
3rd Layer1,44828-3/16
4th Layer1,27240-11/16
5th Layer1,13550

The line pull capacity of your winch is determined by the maximum load your winch can pull with a single layer of rope on the drum. As more layers of rope are wound onto the drum, pulling the same load requires more force, leading to a loss in winching power. With a 2nd layer of rope around the drum, your line pull capacity is reduced by approximately 14 percent. With 3 layers on the drum, the line pull capacity is reduced by approximately 23 percent, and with 4 layers on the drum it is reduced by approximately 35 percent.

Note: It is recommended that you begin any line pull with a minimum of 5 wraps and a maximum of 2 layers of rope on the drum.

Double-Line Pulling

Double-Line Pulling

Increase the pulling capacity of your winch by doubling up the rope with a pulley block (CU881080 - sold separately). Secure the pulley block to a tree saver strap (CU881091 - sold separately) with a bow shackle (CU881092 - sold separately) to provide a strong anchor for your double-line pull. Using double-line operation will approximately double your winch's pulling capacity.

122392 ComeUp Cub 2 Powersports ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs

Video of ComeUp Cub 2 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for ComeUp Electric Winch - ATV - UTV Winch - CU122392 Review

Today we are going to be taking a look at part number CU122392. This is the Come Up Cub 2 Power Sports ATV wench. The Cub Series Power Sports Wench can help you get out of the mud, snow, ice or whatever obstacle stands in your way. Right up front, I do want to mention that it is designed to mount to a mounting plate or a mounting bracket. Because this is an ATV wench mount, depending on your ATV is going to really kinda help pick whatever bracket you are going to need. So your bracket is not included with this part, it is going to be sold separately. Now this unit is going to be designed for endurance and reliability.

You can see it comes with a lot of different parts right here, laid out on the table. We are going to have a high efficient, low amp motor. When it comes to the permanent magnetic motor, so high efficient low amp draw. This right here is going to be our submersible sealed contactor. This is going to handle high amps and allows higher duty cycle.

When this is fully installed, it is actually going to be mounted closer to the battery. It disconnects your wench from the power source when the vehicle is not in use. So all the wiring runs from the wench to the contactor and then from the contactor to the battery, so its the in-between. It is also going to come with your handlebar rocker switch, that way you can control the in and out function of the wench right from the seat of your ATV. All the necessary wiring and hardware is included. You can see here we have some different colored wiring, all the wiring is going to be color coded.

The terminals here where the wires are going to connect, we have a yellow bolt end on this side, so that's going to be where the yellow wire connects. Same here on the contactor. And blue on this side and that is going to be the same on the contactor as well. So color coded wires makes installation really easy and simple. Now when it comes to the rated line pull, with the single line around the drum that is going to be rated at 2000 pounds. And then that rated line pull is going to decrease with the more wire rope we get around the drum. The motor on the unit is going to be a 600 watt 0.8 horsepower 12 volt permanent magnetic motor.

It is going to feature a gear ratio of 103 to 1, it is a three stage planetary gear. It is going to offer really good pulling force. On this side right here, we are going to have the clutch that is going to be this red lever. That is going to disengage or engage the system. When its disengaged that is going to allow for free spool option. That way we can just grab the end of the rope, we can pull it out and hook it up to our load or anchor point. And again we have the nice little clutch shifter on the side. Very visible and easy to use. Now wire rope is going to run through a wire, excuse me, a roller fair lead. All of these rollers are going to spin freely as the wire rope goes in or out of the wench. That is going to protect the wire rope, reduces the amount of friction. Now keep in mind, the fair lead, it does not mount to the wench. It is actually designed to mount to the wench mounting bracket, which again is sold separately. But it does come with all the necessary hardware. So on this side, these two bolts and then these fours and lockwashers. The four bolts and lockwashers are going to go here on the bottom. That is going to be what mounts the wench to the mounting surface or mounting plate. And then these two bolts are going to mount the roller fair lead to the mounting plate. You are going to get all the hardware right here for the rocker switch to get installed on your handlebars. It is going to come with some different options with the bolts. And then you are going to get the rubberized boots to protect the connection points here on your wires. When it comes to the braking system, We are looking at a mechanical and dynamic load holding brake. It is going to offer 100% braking. When it comes to the construction of the drum, we are looking at aluminium dye cast construction. It is going to feature a center drum design. The drum size is going to measure an 1 1/2 inch in diameter by 3 inches in length. And then we are going to have a nice strong and durable steel housing, when it comes to the construction of our wench. When it comes to the cable, you are going to have 50 feet of cable to work with. That is going to give us a diameter of 530 seconds of an inch, this is galvanized aircraft 87x19. It is very strong and durable, it is going to be resistant towards rust and corrosion. It is going to come with the grade 70 forged steel hook. It goes in right here with the pin and clip and it got the hand saver strap on there. Now when it comes to the recommended battery size, the minimum battery size for wenching is going to be 550 CCA. These leads, these are going to be your battery leads. They are going to be 6 gauge wiring and their going to measure 6 feet long. Each one is going to measure 6 feet long, so it is going to give you plenty of wiring to work with. When it comes to the mounting bolt pattern that is going to be the pattern here on the bottom of the wench. So you can see these four bolt holes right here. It is also going to come with a template, which is actual size. So you can use this template . The distance that we have between all these holes going the longer way right here, the length. That is going to give us a measurement of 4 and 7 inch, or excuse me, 4 7/8 of an inch. And from the center of this hole to the center of this hole, which again this template is going to match up with the pattern right here on the bottom. So going this direction, that is going to be separated down the center by 3 inches. Now the wench weight, including the wire ropes, with that install it is going to be just over 14 pounds. A couple of last things I want to mention, I want to go over the overall measurements of just the actual housing here of the wench. When I took a measurement from outer edge to outer edge, measured about 11 1/4 of an inch. When I measured the overall width, measuring from outer edge to outer edge, measured about 4 inches. And the overall height, measured about 4 and 3/4 of an inch. Now the last thing I want to mention is the line speed and the amp draw. And we are going to be giving these number with the layer of rope on the drum. So the line pull with no load is going to have a line speed of 20 feet per minute and the amp draw at 12 volts of 20, 20 amps. With 660 pounds, excuse me, 666 pounds we are looking at a line speed of 15.1 feet per minute and 50 amps at 12 volts. 1344 pounds, we are looking at 10.2 feet per minute with a 100 amp draw at 12 volts. And max capacity at 2000 pounds, we'll get a line speed of 6.6 feet per minute and 150 amps at 12 volts. That is going to do it for today's look at part number CU122392.

Customer Reviews

ComeUp Cub 2 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs - CU122392

Average Customer Rating:  4.7 out of 5 stars   (3 Customer Reviews)

Light-duty winch with 0.8-hp, permanent magnet motor lets you quickly and safely recover a stuck ATV. Sealed design ensures winch operates in any environment. Dual brakes offer reliable load holding. Handlebar rocker switch included.

- CU122392

This was the product that most closely matched the high end original winch on my Polaris ATV. The same design, dimensions and bolt pattern allowed an easy swap out. Primary use will be operation as snowplow lift. The ease of swap out slowed as I used my original mounting plate assembly that may have been thicker than a replacement. I required mounting bolts 1/4 longer than the supplied hardware. I would recommend this as an affordable replacement winch, completed plowing and pleased with my choice. 596572

- CU129412

Review from a similar ComeUp Cub in Electric Winch

Still going strong, have used more times than I want to admit. It has saved us over and over. Love the synthetic rope over the wire version I had prior to this. 550250

- CU123933

Review from a similar ComeUp Cub in Electric Winch

Exactly what I was looking for. The 1 bad thing is battery cable is too short but I can extend. 680344


Ask the Experts about this ComeUp Electric Winch

Do you have a question about this Electric Winch?

  • Why

    At we guarantee:

  • Highest quality electric winch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate electric winch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Installed by:
Cole B
Installed by:
Robert C
Video Edited:
Chris R
Video by:
Chris R
Updated by:
Matthew S
Updated by:
Ronnie R
Written by:
Ronnie R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.