Snap-Loc 2" x 12' E-Track Cam Strap Tie-Down - 3,000 lbs

Snap-Loc E Track - SL86AR

This heavy-duty cargo strap has E track fittings at either end that secure to Snap-Loc or any E track system anchor points. The built-in loop end and cam buckle make it easy to tighten and secure the strap.

Features:

• Heavy-duty 2" wide polyester E track strap with cam buckle securely holds your cargo
• 2 E track ends and a soft loop offer lots of different ways to use your cargo strap
  • E track fittings will attach to Snap-Loc anchors or to any standard E track (each sold separately)
  • Cam buckle is attached to fixed 18" long lead end
  • Built-in soft loop end makes it easy to pull the strap tight through the cam buckle
  • Loop end can also act as a soft tie-down to keep your gear protected
• Cam buckle locks onto the strap securely so it and your gear stays where you want
• Hook-and-loop ties let you wrap up excess strap
• Heavy-duty thick steel has zinc plating to resist corrosion
• Made in the USA

Specs:

• Strap dimensions: 2" wide x 12' long
• Maximum load (break strength): 3,000 lbs
• Safe working load limit (WLL): 1,000 lbs
• 1-Year limited warranty

Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.

Use this heavy-duty cam-buckle strap to help secure your cargo. Each end of the logistics strap has an E Track fitting that connects to a Snap-Loc single-slot anchor or to any other E Track anchor point, and the built-in soft loop end lets you pull the strap tight. Or thread the E Track end through the loop to tighten your strap around cargo.

The E Track ends attach to an E Track anchor slot using a spring-loaded mechanism. Just pull back on the E Track attachment's lever, put the end into the slot, and then release the lever.

The cam grips the strap webbing to hold it in place and helps to adjust the strap length when you are securing your gear. When you want to loosen the strap, push down on the cam buckle to release the cam buckle's grip and pull the strap through. The cam buckle is zinc plated to resist corrosion. Hook-and-loop ties (similar to Velcro) help to secure any extra strap length, so the excess strap doesn't flap in the wind as you travel down the road.

SLTE212CR Snap-Loc 2 in x (8-20) ft E-Track Cam Strap - Cargo Control - 3,000 lb