Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Retail:$120.95
Our Price: $78.54
You Save: 35%
Confirmed to Fit
2008 Toyota Tacoma
without factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (949)
- Q & A (0)
- Photos
2008 Toyota Tacoma - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
Install a 4-way flat on your Toyota Tacoma with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your vehicle's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring. If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your vehicle operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (949 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Mark 05/10/2024
Kia
Installed easily. Kia should have a plug in option so that you don't have to run wiring all the way to the battery. But installed fine, well detailed by etrailer.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Daniel 05/14/2024
The product works great but the instructions were a little hard to follow for a newbie. I did eventually get it going but I needed to consult my mechanic (YouTube) to get it all figured out.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Gale 05/10/2024
I had this wiring harness professionally installed. Works as it should.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Michael 03/25/2024
Works as it should. The video made it easy to install. Didn't come with quiet enough hardware to install but that wasn't a big deal though.
by: Allan04/10/2024
Ordered wrong part. They graciously handled the mess I created and sent out the right parts I needed right away.
by: Mark04/14/2024
Wasn’t specific to my car. To much hassle modifying it to work with my car.
Jenny N.
4/16/2024
Depending on the vehicle some harnesses are only available as a splice in harness. For the 2023 Hyundai Palisade there is now a plug in harness that uses the tail light connectors to plug into. It is part # C43FV.
25
946
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Recommended Trailer Hitch Receiver For A 2024 Toyota Camry SEYes, the Curt Trailer Hitch Receiver # C11576 fits all sub models of the 2024 Toyota Camry. If you plan on towing a small trailer or just want to add lights to a bike rack or cargo carrier then I also recommend picking up the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 as well.
view full answer... - Recommended Trailer Hitch Receiver For a 2024 Honda CR-V HybridI recommend installing our etrailer Trailer Hitch Receiver # e98848 on your 2024 Honda CR-V Hybrid. I have included an installation video at the bottom of the page which shows the installation on a 2024 Hybrid we had in our shop. If you are needing a 4-way wiring harness we have the # C56370 for all wheel drive vehicles and the # C59236 if you only have front wheel drive.
view full answer... - Is there a Hitch for a 2024 Honda HR-V?Yes, they do! There is one hitch for the 2024 Honda HR-V and it is the Curt item # C68DR. This class I hitch with a 1-1/4" receiver is custom fit and bolts to an HR-V with included hardware. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. I really like this hitch because it mounts between the bumper bar and your bumper cover. This conceals everything but the 1-1/4" receiver. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity, and...
view full answer...
- Which Trailer Hitch for 2021 Toyota Highlander XSE?The Curt # C99FR Class III hitch you mentioned would work great with your Highlander XSE. Keep in mind, if the vehicle is equipped with the What are you planning on using the hitch for? If you'll just use it for a hitch mounted accessory, all you need is the hitch. If you'll be using it for towing, you'll need a wiring harness, a ball mount and a trailer ball. For a wiring harness, what you'll use will depend on whether your vehicle is equipped with the factory tow package. If you DO have...
view full answer... - Where to Look for an Installer to Install CURT Trailer Hitch # 13573 on a 2010 BMW X3I do not know the Delaware of Philadelphia areas so I cannot say for sure. But, any RV dealer that also works on trailer should be able to install the hitch. A qualified and trusted mechanic could also perform the installation. I have included a link to the installation details for you to take a look at. You could always print them out and show them to a potential installer so they have a better idea of what the installation entails ahead of time. If you plan on doing some towing, I recommend...
view full answer... - 2023 Jeep Cherokee Trailer Wiring to Pair with Factory HitchThe trailer hitch wiring I recommend for your 2023 Jeep Cherokee is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will splice into your OEM wiring and then get powered directly from your battery to help protect your factory wiring. To secure the 4-Way connector next to your receiver you also need the mounting brackets # 18144 and # C57202.
view full answer... - No Splice Trailer Wiring Recommendation for 2004 Lexus LS 430I have a great trailer wiring solution for you. The ZCI kit part # 119250KIT is a trailer wiring kit that uses sensors instead of splices which means you don't have to worry about trying to splice into the very thin wiring of your 2004 Lexus LS 430.
view full answer... - What is the Best Hitch for a Bike Rack on a 2024 Ford Bronco?The best hitch for a bike rack on your 2024 Ford Bronco is the Draw-Tite item # DT37GR. This hitch is custom fit and bolts to your Bronco's bumper with included hardware. The Draw-Tite item # DT37GR was specifically designed with a longer receiver to clear your spare tire. The hitch pin hole extends 7" past the outside edge of your Bronco's bumper. It extends 6" farther than the Curt item # C76WR you were looking at. This hitch also has the highest capacity available amongst Bronco hitches....
view full answer...
- Will The Curt Powered Tail Light Converter # C59236 Void The Warranty On a 2023 Kia Telluride? The Curt Powered Tail Light Converter # C59236 will not void your KIA warranty as long as it is installed per the manufacturers instructions. While Kia may not list this as an approved product since they would rather you install one of their dealer offered harnesses it will not be listed as something you cannot install on your 2023 Kia Telluride.
view full answer... - Trailer Hitch Receiver, Wiring & Ball Mount For Towing a Utility Trailer w/ 2024 Hyundai Santa CruzI recommend using the Curt Trailer Hitch Receiver # C23WR on your 2024 Hyundai Santa Cruz. This receiver is custom fit for your vehicle so no drilling is required to bolt to your frame. When we installed this on a 2022 Santa Cruz we found it to have a hitch height of 14". With most utility trailers having a height of roughly 16" for the coupler I recommend using a Curt Towing Starter Kit # C45554 which includes a 2" hitch ball most commonly found on utility trailers. The Curt Powered...
view full answer... - Hitch With A mounting Bracket For A 7 Pole Plug For A 2003 Chevrolet TahoeFor your 2003 Chevrolet Tahoe I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e26KR. If your vehicle has factory wiring, I recommend the Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors Item # 30955 which come with the four and 7 pole plug as well as the bracket. If you do not have a factory 7 pole plug, I recommend the Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit Item # C59236. If your...
view full answer... - Is Wiring Harness on 2006 Porsche Cayenne Compatible with CANbus SystemThe Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 itself will not trigger a warning of the CANbus system in your 2006 Porsche Cayenne. Since your trailer has LEDs it is possible that some type of error will come across because of the low power draw. To remedy this you can use LED Light Bulb Load-Resistors # DI34ZR but I recommend taking a look to see if this occurs as it is possible you may not need them. I have added a link to a video review as well of...
view full answer... - Recommended Trailer Hitch Receiver For 2005 Lexus LS 430I have a different option for you, but the Curt Trailer Hitch Receiver # C13900 you were looking at is not confirmed to fit your 2005 Lexus LS 430. Instead I recommend the Curt # C12231 which is currently the only trailer hitch receiver confirmed to fit your specific vehicle. This hitch has a 1-1/4" receiver with a 250lb tongue weight rating and 2500lb trailer weight rating making it a perfect choice for carrying a bike rack, cargo carrier, or adding a ball mount to tow a trailer. If...
view full answer... - Recommended Hitch for a 2023 Kia TellurideThe best hitch for your 2023 Kia Telluride is the etrailer Hitch item # e45ZR. This is a class III hitch that is custom fit and bolts to your Kia with included hardware. The reason I like this hitch is because of its hidden design. The only part that is visible is the 2" receiver. It also has a matte finish which blends in better with the Telluride's underbody paneling than the glossy finish of other options. This is a class III hitch with a 2" receiver it weighs 46 lbs. It has a 5,000...
view full answer...
- Recommended Wiring Harness for a 2023 Kia TellurideThe only wiring harness currently available for the 2023 Kia Telluride is the Curt Powered Tail Light Converter item # C59236. This is a universal harness that requires splicing. There are no custom fit wiring harnesses available or an ETA on when we can expect one.(4/1/23) I saw you were looking at the etrailer Hitch item # e45ZR, this hitch is confirmed to fit your 2023 Kia Telluride. I have linked a couple of installation videos below for these parts. To round out your towing setup...
view full answer... - Recommended Trailer Hitch Receiver and 4-Way Wiring For a 2023 Ford EscapeI recommend installing the etrailer Trailer Hitch Receiver # e89YR on your 2023 Ford Escape. Our receiver is made in the USA and has a matte black finish for a clean factory appearance. I have linked an installation video below which will help you determine if this is something you will be able to install yourself. The Curt Powered Tail Light Converter # C59236 will provide you with a 4-way flat trailer connector. This is the common connector used on most small trailers. It will also...
view full answer... - Trailer Hitch Receiver & Wiring For a 2024 Honda CR-V For Carrying Kuat Piston Pro X Bike RackI recommend installing the etrailer Trailer Hitch Receiver # e98848 on your 2024 Honda CR-V EX-L. This will give you the 2" receiver opening needed for the Kuat Piston Pro X Bike Rack # KU98VR. Our receiver is made in the USA and the matte black finish gives it a clean OEM appearance. For the built in lighting on the Kuat Piston Pro you will need either the front wheel drive Wiring Kit # C59236 or all wheel drive Wiring Kit # C56370. This will give you a 4-way wiring connector for the...
view full answer... - Installation Process For A Trailer Brake Controller In A 2022 Toyota Highlander Before you can install a trailer brake controller in your 2022 Toyota Highlander you'll first need to make sure that you have a 4-pole wire harness for your lights installed and then a 7-way wire harness to get your brake function. If you don't already have a 4-pole installed then you'll want the Tekonsha # TK74FR if you have a factory tow package or the Curt # C59236 if you don't. From there you can install a 7-way # ETBC7. The # ETBC7 will have a 4-pole connector to connect to the 4-pole...
view full answer... - Trailer Hitch Receiver and 4-Way Wiring For a 2024 Toyota Grand HighlanderThe Curt Trailer Hitch Receiver # C26VV fits your 2024 Toyota Grand Highlander. This gives you a 2" receiver opening allowing for a large selection of hitch mounted accessories and ball mounts. I recommend installing the Curt Curt Powered Tail Light Converter # C59236 when you install the receiver. This will give you a 4-way flat connector which allows you to connect to most small trailers or Auxiliary Lights # C53201.
view full answer... - Recommended Trailer Hitch Receiver For A 2024 Acura MDXFor your 2024 Acura MDX you can use the etrailer Trailer Hitch Receiver # e27KR. This hitch has a hidden design so you'll only see the receiver tube for a more factory look. Because of this you won't be able to store a full-size spare under the vehicle and will instead need a smaller spare. As for the installation, it's honestly super easy easy to do since the undercarriage is pretty open and shouldn't take more than 30-45 minutes for someone with limited mechanical skills. I've attached...
view full answer... - Recommended Trailer Hitch Receiver For A 2024 Nissan Pathfinder Yes, the Curt Trailer Hitch Receiver # C46DR is a confirmed fit for the 2024 Nissan Pathfinder. If you plan on installing this yourself then I recommend following along with Brad's installation video that I've attached below. If you plan on towing a trailer as well then you'll also need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 to transfer your traffic signals through to the trailer's lights.
view full answer... - What is the Best Hitch for a 2024 Kia Telluride?Congrats on the new vehicle! The best hitch for your 2024 Kia Telluride is the etrailer item # e45ZR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a 750 lbs maximum tongue weight. The etrailer item # e45ZR is the best hitch because the main crosstube mounts completely behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground...
view full answer...
- Hitch Recommendation For A 2001 International School BusWhen it comes to installing a tow hitch on your 2001 International school bus the only type of hitch I recommend that is a bolt up hitch is The Adjustable Width Trailer Hitch Receiver for RVs # 13703. It is a universal style hitch that will fit frames between 22 inches to 72 inches. We do also have the weld on style hitch # C99CR which is a universal hitch for use on service body trucks and utility body trucks. When it comes to wiring your school bus we do not have a custom fit kit that...
view full answer... - Recommended Hitch for a 2023 Toyota CamryTo add a hitch to your 2023 Toyota Camry, I recommend the Curt Trailer Hitch item # C11576. This hitch is custom fit and bolts to your Camry with included hardware. This hitch is confirmed to fit all models of the 2023 Camry including the hybrid. This is a class I hitch with a 1-1/4" receiver. There are no class III hitches available. I really like the Curt Hitch because the crosstube mounts behind your rear bumper. This not only helps with ground clearance because all you will be able...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.