Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
Item # C59496
Our Price: $168.74
Confirmed to Fit
2006 Saab 9-2X
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (106)
- Q & A (0)
- Photos
2006 Saab 9-2X - Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your Saab 9-2X's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Avoids overloading your vehicle's electrical system by connecting directly to your battery
- Power wire and fuse kit included
- Designed with safety in mind
- Guards against electrical shorts, mis-wire situations, and electrostatic discharge
- Splices into your vehicle's wiring with the included quick-splice connectors
- Color-coded wires ease installation
- Resists damage from shock and vibration for superior operation on rough roads
- Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction
- Includes durable, molded-rubber, female output socket with protective dust cover
Specs:
- Application:
- Vehicles with 2-wire or 3-wire electrical systems
- Trailers and vehicles with LED or incandescent lights
- 4-Way harness length: 58"
- Splice-in wire length: 17"
- Ground wire length: 17"
- Power wire length: 20'
- Maximum amperage:
- Turn lights and brake lights: 3 amps per circuit
- Tail lights: 3 amps per circuit
- Wire gauge:
- Power wire: 12
- Limited 1-year warranty
Do I Need A Tail Light Converter?
Some vehicles operate on a 3-wire system, wherein the brake signal and the turn signals run on separate wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) But most trailers run on a 2-wire system, which means the brake and turn signals travel along a single wire. You'll notice that, on your trailer, the brake light will flash for the turn signals.
If your vehicle operates on a 3-wire system, it will need to be converted so it will be compatible with the wiring system of your trailer. This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
Powered by Your Battery
This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailer lights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter.
Converter Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn |
| Brown | Tail lights |
| Black | Battery power |
| Red | Brake |
| White | Ground |
| Yellow | Left turn |
Powered Tail Light Converter Installation
This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's. The powered converter box has splice-in wires on one end and a harness with a 4-way flat vehicle-end connector on the other. It also comes with a power wire that will connect to your battery so your electrical system doesn't get overloaded.
To begin the installation, use the included circuit tester to double-check the function of each wire on your vehicle's tail light wiring harness. The color/function of the splice-in wires on this converter may not match the color/function of those on your vehicle, so you'll want to be sure to check all of the wire functions first. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in one of the taps and snap the cover down.
Using the included double-sided tape, stick the converter box to a flat surface inside your vehicle near the tail lights. It's helpful to clean the surface first so the tape can adhere fully.
Once the converter box is spliced in, you need to run the power wire up to your battery. Be sure to remove the fuse before connecting anything so you don't blow it! You can put it back in once everything has been installed. To hook up to your battery, you'll need to disconnect the negative cable from your battery and attach the power wire to the positive terminal with the included ring terminal.
Find a raw, unpainted metal surface to use as a grounding point and secure the white ground wire using the included self-tapping screw. Cleaning the surface before securing the white wire will ensure the converter is fully grounded. If you have a 2-wire system, the red brake wire will need to be grounded as well. You can do that in the same way, using an extra ring terminal (sold separately). Finally, secure the converter wires to your vehicle using included cable ties.
Quick Tips:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
Built Using Surface-Mount Technology
Curt builds each tail light converter using surface-mount technology (SMT). This construction method involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a smaller circuit board that provides more routing area and that offers superior performance, reliability, and durability.
Circuit boards constructed using SMT perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, increasing durability and lifespan. In addition, lower resistance levels ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
56496 Curt Saab 9-2X Wiring Harness with Saab 9-2X End 4-Pole Connector and Powered Converter Kit - 58" Long
55151 Powered Converter Wiring Kit
48705 Circuit Tester
Replaces 56146KIT
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit - C59496
Average Customer Rating: 4.7 out of 5 stars (106 Customer Reviews)
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.by: Patricia 02/20/2024
Complete converter. Perfect for my car. Made towing a trailer very safe and easy.
by: Chris 01/18/2024
2023 Ford Maverick
Also a must for newer vehicles with fine gauge wiring to assure adequate current is sent to the trailer lights. Easy to install and works great!!
by: Donald 02/02/2024
Haven't installed the harness yet
by: Daryl 11/14/2023
The hitch was easy to install. But the wiring harness I couldn’t install it. I didn’t want to split the wires.
by: Matthew05/06/2022
2005 Volvo XC70
I installed this in about 1 hour mostly reading and discovering which wires to use. I went and tested on a standard trailer and all the lights work as expected. With the battery in the back of the Volvo xc70 2005 I didn't have to run the wire to the front so it was even easier to install than most vehicles
by: Alan11/07/2020
2004 Mercedes-Benz SLK-Class
Very happy with the trailer hitch and 4-way tail light converter for my 2004 Mercedes SLK 320. I never thought anyone would make one for a sports car, but etrailer does and it works perfectly. I found the etrailer hitch on the "SLK World" website, where other SLK owners have also installed it, and would recommend going there if you have an SLK.
by: Ben05/30/2022
Easy plug and play install. Replaced old version that had a fried converter.
Second time buying from Etrailer, will buy again if necessary. Came in a timely manner.
Ben
5/30/2023
Still in good shape no issues
by: William 11/20/2023
2022 Genesis GV80
This harness worked great and very easy install.
by: Wordash Jones06/15/2023
Product was great! Fit perfectly on my 2022 Kia Sorento Hybrid S Model. I worked at a dealership so I got the hook-up for installation but the product and the service are unmatched at etrailer.
by: Al03/30/2023
I have an older but well maintained Class A RV. I wanted to tow with lights but found out my turn signals were not the same as my brake lights. etrailer had the solution for my problem. Been on 2 cross country trips with the lights module and everything works great !
by: Kelsey 05/14/2023
"Plug and play" towed multiple trailers with no lighting issues very happy with the product.
by: George Jetson04/30/2023
2021 Ford Bronco Sport
Mounted the receiver yesterday. Receiver is very well built. Instructions could have been better. Instructions are clear on where to trim the bumper cover but do not mention modifying the heat shield that is behind it.
Overall a good fit and a well made product.
by: Steve 07/07/2022
Looks to be of high quality
Steve
7/12/2023
100
by: Dave K02/14/2023
Not looking forward to the wiring installation, but the instructions look very good. Curt makes a really great hitch.
by: Erin 05/20/2023
works great!
plug and play!
by: Tony10/12/2023
Great customer service
by: Bryan 10/08/2022
2016 Volkswagen Jetta
Got this for a 2016 Jetta. Instructions say to run this outside and under the car, but found it easier to run up the left side in the interior, tucking under the trim pieces and through the steering boot to the fuse box. Works great!
by: Tim P.10/16/2018
2004 Dodge Sprinter
converter and flat 4 wiring was fine. for my application, the green RH turn signal wire was over 2 feet too short to cross from one tail light to the other. really, add 3 ft to the wire, much less hassle. the power wire from battery to converter is ALSO TOO SHORT, by more than 5 feet. Since that part of the kit is really only the fuse holder and the wire, this was a waste of money. NOT AT ALL WHAT I WOULD CALL A UNIVERSAL FIT.
Heather A.
10/27/2018
This wiring harness part C59496 is considered a universal fit because it is not a plug and play custom fit application. It can be hardwired into many different vehicles. If you needed extra wire for your vehicle, I recommend part # DW02412-1 for extra 14 gauge wire.
Helpful Links
by: David07/20/2023
Functional piece of equipment. Was easy to install.
by: Christopher 07/25/2023
Worked as advertised and easy to install
by: Steven04/27/2022
2008 Lincoln Town Car
The trailer lighter converter doesn't seem to work the brake lights after installation. I will be contacting customer service about this issue.
Sierra K.
5/4/2022
Before you test the harness with a circuit tester like item # PTW2992 can you please remove the fuse on the power wire for 30 minutes, then reinstall it. This fuse should be located close to the vehicle battery in a fuse box. If the powered converter box has engaged its circuit protection feature, this will reset the box unless it was overloaded and it was damaged.
Helpful Links
Steven
5/4/2022
I wish to apologize thinking there was an issue with the converter when there wasnt, the next day I did a check and because I infact thought I needed to connect the brake red wire directly to the brake switch and not the multi-purpose red and green wire on my 08 Lincoln. It works great when you wire it correctly.
by: Walt 04/05/2023
Great looking product can't wait for in stallation
by: Juan04/20/2021
The Curt trailer hitch has been perfect- i also purchased the light system to connect to the trailer - it took me a whole day to install and i am thankful for the detailed videos for the hitch and lights. I only got help with the hitch when lifting it into position as i do not have a hitch jack. I think the hitch is top quality and I am confident to pull anything-
by: KPT07/10/2022
Works well - installation isn't hard after you figure out where to mount the unit and identify which wires in the vehicle harness are needed to attach the converter.
The tester probe is pretty much useless as it's hard to see. I ended using my own test tools (multimeter) to confirm its operation.
Rather than drill holes in the vehicle. I keep the harness inside the vehicle and pull it out when needed.
by: Randy 05/21/2023
On my cmax it was easy to put to geather. On the cmax the battery is in the back.
25
106
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Correct Wiring Harness For 2020 Mitsubishi Outlander PHEVThe Curt 56412 is indeed the same as the Curt T-Connector Vehicle Wiring Harness # C77KR, and does fit your 2020 Mitsubishi Outlander PHEV. It is is the correct harness if you have the factory tow package, otherwise you will need a splice-in harness: - Factory Tow Package: Curt T-Connector Vehicle Wiring Harness # C77KR - No Factory Tow Package: Curt Upgraded Circuit Protected Powered Tail Light Converter # C59496 Often, when there is an issue where one light is not functioning, the...
view full answer... - Wiring a 2007 VW Eos 3.2 with Multiplexed Wiring for Towing a TrailerThe 2007 Volkswagen Eos has a Multiplexed wiring system that requires wiring the Upgraded Heavy Duty Modulite Circuit Protected Vehicle Wiring Harness, item # C59496, for a trailer connector. There are 3 ways of wiring depending on how your vehicle is wired from the factory. In the instructions, at step 9 (see link), it explains that you may have a two wire system that requires the red stop wire to be grounded along with the white wire. If you have the 3 wire system (most likely) with amber...
view full answer... - Recommended Trailer Wiring Harness for a 2016 Cadillac SRX Without Tow PackageCorrect, the trailer wiring harness that you need to power trailer lights is not included with any of our trailer hitches. In order to add this I recommend using the Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit and Tester - 4-Pole Flat # C59496. For a trailer hitch, I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75682 because it is a bolt-on option that provides a clean look once installed which you can see from the attached photo....
view full answer...
- Recommended Trailer Hitch/Trailer Wiring Harness For A 2023 Hyundai PalisadeI recommend the etrailer Trailer Hitch Receiver # e95ZR for your 2023 Hyundai Palisade. I like this trailer hitch over the others that we offer because it has a matte black powder coating that will make the scratches and scuffs that you will receive while towing less visible than the others hitches we offer. The trailer hitch has a bolt-on installation with no welding required. We currently do not have a installation video on the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle...
view full answer... - Preparing a 2017 Mercedes-Benz GLC 300 for Towing a Travel TrailerYour 2017 Mercedes-Benz GLC 300 is rated to tow 3,500lbs which is enough for a couple of the smaller Forest River R-pod travel trailers. Your Mercedes chassis is not recommended to be used with a weight distribution and sway hitch. For the sway control you can install the Tuson Sway Control # 335TSC-1000 to make driving your R-pod safer. The Curt Trailer Hitch Receiver # C13290 will give you a 2" receiver to be able to tow the R-pod. It is custom fit to bolt up to your Mercedes. The...
view full answer... - Trailer Wiring Harness Recommendation for a 2005 Cadillac SRX V8 Rear Wheel DriveWe have some trailer wiring harnesses that have been confirmed to work with the 2005 Cadillac SRX, but they are all the universal hardwire kits, not T-connector style harnesses. For your SRX, we recommend installing the Curt Circuit Protected Tail Light Wiring Kit, # C59496. We have installed this harness on a 2004 SRX, so I attached the installation video for you to check out. I have also attached the installation instructions. The installation for the 2004 SRX will be the same for your...
view full answer... - Options for Carrying a Wheelchair with 2007 Volvo XC70If your 2007 Volvo XC70 has a 2 inch trailer hitch receiver, the hitch-mounted wheelchair carrier I recommend is the Flint Hill Goods 30x50 Cargo Carrier with 48 Inch Long Ramp # FHG77ZR. This carrier will help you easily load your wheelchair with the attached ramp. This carrier has a weight capacity of 500 pounds and is made from a sturdy steel construction. I have attached a review video of this carrier for you. If the trailer hitch on your XC70 is a Class II trailer hitch with a 1-1/4...
view full answer... - Trailer Hitch Compatible with 2016 BMW X1 Hands-Free LiftgateFor your 2016 BMW X1 the Curt hitch part # C13303 has been confirmed as a fit and would work well. The hands-free liftgate will still function on your vehicle but at worst you may have to aim your foot to either side of the hitch opening. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
view full answer... - Recommended Trailer Hitch Receiver For Towing Scamp 13 Trailer With 2014 Volkswagen Jetta SportWagenSince you are planning to tow a Scamp 13 Fiberglass Lightweight Trailer with your 2014 Volkswagen Jetta TDI Sportwagen I recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7284 due to its low profile design that only leaves the receiver exposed when installed as you can see in the included picture, and since it is the only 2" trailer hitch receiver option. The EcoHitch # 306-X7284 has a maximum tongue weight rating of 300lbs, and maximum trailer weight rating of 2000lbs which...
view full answer...
- Recommended Trailer Connector And Wiring Adapter For 2014 Ram 1500 LaramieAs long as your 2014 Ram 1500 Laramie was wired for a 7-way connector you can use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933 which will give you a 7-way and 4-way connector. The connector should be behind the rear bumper of your truck. You should have the connector behind the rear bumper, but if you do not have the the connector to plug in the 7-way connector you will need to add a 4-way connector using the Tekonsha Upgraded...
view full answer... - Trailer Hitch for a 2006 Dodge Sprinter with 158 Inch Wheel Base, Dually Wheels, and Step BumperFor your 2006 Dodge Sprinter with the 158 inch wheel base and dual rear wheels with the step bumper I recommend Curt trailer hitch # 14250. Since you have the 3500 series Sprinter, this hitch will allow you to maximize the amount of weight you can tow (consult owners manual for towing capacity of the Sprinter). The hitch is rated for 10,000 pounds gross trailer weight and 1,000 pounds tongue weight. When used with weight distribution it is rated for 12,000 pounds gross trailer weight,...
view full answer... - Will The Stealth Hitches Receiver # SH69ZR Fit a 2016 Volkswagen Golf R?For your 2016 Volkswagen Golf R I recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7332. The Stealth Hitches # SH69ZR will only fit on the GTI. The EcoHitch gives you a 2" receiver opening like the Stealth Hitches you found. The EcoHitch is made in the USA from recycled materials and comes with a lifetime warranty. The ModuLite # C59496 will provide a 4-way flat trailer connector. This will be needed if you tow a small trailer or carrying a hitch mounted accessory which impairs...
view full answer... - Recommended 2" Hitch for a 2010 VW Jetta SportWagen Yes, there is a 2" hitch for the 2010 Jetta SportWagen. It is the EcoHitch item # 306-X7284. This hitch is custom fit and bolts to your VW with included hardware. It fits both the standard gas and diesel models. I have linked an installation video below. If you are planning on towing you will also need a wiring harness item # C59496 and a ball mount kit item # C45534.
view full answer... - How Would Brake Controller Install in 2016 Seneca 37TS MotorhomeI looked and was not able to find any trailer wiring or brake controller wiring for your 2016 Seneca 37ts motorhome which is built on a Freightliner M2 chassis. You will need to start with a 4-way. For that you would want the # C59496. This will be the base of the wiring setup to control the lighting of the trailer you plan to tow. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install...
view full answer... - Wiring Harness To Pull A Trailer With A Harley TouringHello Denns, I can definitely point you in the right direction for a wiring harness for your Harley Touring. You did not mention what kind of trailer connector you need, and basically there are two possible scenarios. If the trailer has a standard 4-Way connector and tail lights that combine the stop and turn signals (most trailers in the U.S.) then you will need to use a converter to convert the motorcycle 3 wire system down to a 2 wire system that combines stop and turn signal. I suggest...
view full answer... - Troubleshooting Electric Trailer Brakes That Apply With Vehicle in ReverseThere are a couple possibilities that come to mind. If you had a hydraulic surge coupler, it would explain why the brakes apply when you attempt to back the vehicle but since you have electric brakes, I'm guessing it's an electrical problem. Either the trailer connector on the vehicle or trailer has been miswired so that the trailer brakes power up when the vehicle is shifted into reverse or there's corrosion in the trailer connector allowing the reverse lamp circuit to bridge to the brake...
view full answer... - 4-Way Wiring Harness For 2023 Honda Pilot Without Tow PackageIf your 2023 Honda Pilot doesn't have the tow package port in the storage cubby area on the driver's side that is needed for the plug-in Curt T-Connector # C48ZV then there isn't another plug-in option, you'd have to use the hardwired Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector # C59496. You may want to check just to make sure so you don't have to do more wiring than is necessary. The cut out below is from the instructions of the # C48ZV for where to find the white...
view full answer... - What Hitch and Trailer Wiring do You Recommend for My 2000 Lexus ES300?I have a suspension answer for you. The only way to determine what SuperSprings coil springs you need as a replacement is to measure the gap between the middle of your coils. The spacing of that gap determines what springs you need. It is important to make this measurement on level ground to make sure the measurement is accurate. For example, if you find that the gap is .5 inches, you need the Coil SumoSprings # CSS-1069. Feel free to reply to this answer with your measurements, and I will...
view full answer... - Parts Needed to Install 7-Way on 2007 Toyota SolaraI can help you with the parts needed to install a 7-way on your 2007 Toyota Solara but there isn't a 7-way kit specific to your vehicle. So you'll need to start with a 4-way and then convert to a 7-way. For the 4-way you'll want the part # C59496. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit...
view full answer... - Is an Aftermarket Wiring Harness for a 2010 Harley Davidson UltraClassic AvailableThere may be a wiring harness that you can buy from the Harley Davidson dealer that will plug in to wiring under the seat and make wiring your 2010 Harley Davidson UltraClassic easier and keep you from having to tap into the motorcycles wiring. Whether you use the OEM adapter or not there are two situations for wiring Motorcycles for towing a trailer. The trailer will determine whether you need to use a converter or not. If the trailer has a standard 4-Way connector, like you mentioned,...
view full answer... - Towing Capacity and Parts Needed for 2013 Kia Sorento SXI took a look at an online owner's manual for a 2013 Kia Sorento SX, and it did have the towing capacities, as there were just two, depending on the engine. For a '13 Sorento with a 2.4L engine the towing capacity is 1,650 lbs; if you have the 3.5L engine, the capacity is 1,650 lbs OR 3,500 lbs if you have the 3.5L engine, Trailer Package, and your trailer has brakes. As for your load limit, that will be on a placard somewhere, likely on the door jamb, that has the total weight limit of...
view full answer... - Hitch and Wiring Recommendation for a 2008 Subaru Legacy GTThe Draw-Tite Hitch # 75560 you were looking at is a confirmed fit for your 2008 Subaru Legacy. To tow a wave runner you will need a ball mount, ball, and wiring. The wiring for your Subaru is # C59496. To determine which ball mount and ball you will need will be dependent on your waverunner's trailer. I have linked a Help Article on how to determine which ball mount you will need for your setup. The ball you will need will likely be a 1-7/8 inch like # 19260 or a 2 inch diameter like...
view full answer... - Brake Controller Recommendation and Install Wiring for 2005 Audi Allroad QuattroAll of the 7-way wiring solutions we offer for your 2005 Audi Allroad Quattro do require some splicing to the vehicle wiring but I can help you get the most user friendly and easiest to install solution. First you will need to start with a 4-way (if you don't have one already), for that you'll want the part # C59496 which has a very reliable and high amperage rated converter box. So the easiest to install brake controller that also works really well is the Curt Echo Mobile part # C51180....
view full answer... - Parts Needed to Install a Brake Controller in a 1999 Dodge RamFor your 1999 Dodge Ram 1500 that does not have any trailer wiring at all you would first want to start with the part # 118329 as it is a 4-way like what you referenced but it is a custom fit harness designed to specifically work on your vehicle. The one you mentioned is a universal kit that could work but would be much more difficult to install. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Jonathan Y
Video by:
Dustin K
Video by:
Chris R
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Sabrina W
Written by:
Amanda M
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Matthew
5/7/2023
Its been on a year now and I love the ability to pull a 4x8 trailer with my xc70.