Towing Capacity and Parts Needed for 2013 Kia Sorento SX

Updated 09/22/2020 | Published 09/18/2020

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

(829)

$78.63

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(322)

$237.71

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(175)

$166.82

Question:

I would like to figure out what I can tow with my 2013 Kia Sorento SX AWD. I am getting very confused with “gvw, gvwr, etc.” I am looking to tow a 1999 Keystone Bobcat camper. I was told by the seller it is 20 ft at 3000 lbs. I’m not sure how high that number goes up with cargo, fluid weight, etc. I am looking for any help on this subject. Thank you

asked by: Sophie

Expert Reply:

I took a look at an online owner's manual for a 2013 Kia Sorento SX, and it did have the towing capacities, as there were just two, depending on the engine. For a '13 Sorento with a 2.4L engine the towing capacity is 1,650 lbs; if you have the 3.5L engine, the capacity is 1,650 lbs OR 3,500 lbs if you have the 3.5L engine, Trailer Package, and your trailer has brakes.

As for your load limit, that will be on a placard somewhere, likely on the door jamb, that has the total weight limit of all your cargo, including passengers. To tow a trailer you will need a hitch and trailer wiring, and the parts all require your Sorento have the V6 engine.

- Curt Trailer Hitch Receiver # C13073

- WITH Tow Package: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C56332
- WITHOUT Tow Package: Vehicle Wiring Harness Kit with 4-Pole Trailer Connector # C59496

expert reply by: Kyle S