7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Retail:$59.91
Our Price: $36.62
You Save: 39%
Confirmed to Fit
2014 Audi Q5
with factory Tow Package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2378)
- Q & A (0)
- Photos
2014 Audi Q5 - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Trailer Hitch Wiring
- Hopkins
- No Converter
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Audi Q5's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Audi Q5 End
Item # HM40975
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2378 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Thomas 05/20/2024
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Russell 05/21/2024
Plug and play baby! 2 minute install. Finally an easy fix to something!
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Bill04/07/2024
2020 Chevrolet Silverado 1500
Another easy installation old one out doing in 15 minutes
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
by: Guy05/22/2022
2003 GMC Sierra
Top quality trailer connector that fir original wiring harness perfectly.
Installed in under 15 minutes.
John C.
7/26/2022
Works great and looks great. Get compliments on the hitch.
by: RT12/13/2023
A very good option to cut down on rattle. This is a durable product that is fairly simple to install. My only complaint is the magnet to keep cover closed when not towing should be stronger. I am happy with the purchase and it looks like it will be useable for years.
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
25
2378
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Is the 7- and 4-Pole Trailer Connector Socket a Fit for Ford TrucksThe 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring # HM40975-11998 is a hard wire application, as you can see in the linked installation video we made of this being put on a 2008 Ford F-250. If you only need to connect the plug, which is 7- and 4-Pole Trailer Connector Socket # HM40975, that is a direct replacement for many different years, makes and models of Ford trucks with a factory 7-way; for example it is a fit for a 2018 Ford F-150. If you let me know...
view full answer... - Availability of Extension To Relocate 7-way Trailer ConnectorWe don't offer a dedicated extension, but I have a couple of alternatives that can be used to do that for you. The least expensive option would be to use a 4-foot pigtail like # HM40985, but you'd need to cut off the factory round US CAR connector that's currently plugged into the rear of your 7-way and wire in the pigtail. The wire color function is shown on the linked product page. I'd recommend using heat shrink butt connectors like # DW05745-5 to protect the connections from moisture. An...
view full answer... - Trailer Wiring Harness that will work for 2016 GMC Savana Van with 6-way connectorIf you have a 6-way on your vehicle, there are two routes you can go. You can add a 6-way plug to your trailer or you can switch out the 6-way to a 4-way or 7-way. I would recommend switching out the 6-way on your vehicle to a 4 and 7-way combo such as # HM40975-11998, so that you have the option to haul trailers with different wiring set ups without having to carry an adapter. I say this because 6-way plugs are not very common. If it is a US car connector that you have installed that...
view full answer... - Recommended Trailer Hitch and 7-Way for a 2015 Chevrolet Express VanThe Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41946 is a great option for a 2015 Chevrolet Express Van. It will allow you to tow pretty much any trailer within reason due to the Class V rating. I have attached an install video below. In order to complete your setup you'll need wring as well, the T-One Vehicle Wiring Harness part # 118392 would start you off with a 4-way which could then be adapted to a 7-way using the 4 to 7-Way with 4-Way Adapter part # ETBC7. It does not sound...
view full answer... - Trailer Hitch and Wiring For 2020 Jeep Grand Cherokee SRT-8 I recommend Curt Class III hitch part # C13182 for the 2020 Jeep Grand Cherokee SRT-8 because it has a higher towing capacity compared to the other hitch options available. It has a 6,000 lb gross towing weight but you do want to check your owner's manual to make sure you do not exceed the towing capacity of the SRT-8. I have attached an installation video for your reference. For the wiring, I recommend 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End part # HM40975...
view full answer...
- Wire Color Codes for 7-Way Trailer Connector on 2019 Honda RidgelineI don't have any specifics as to which color wire serves which function but using a circuit tester like # PTW2993 you can easily determine wire function on your own. Have a helper activate the left turn signal. Probe the wires until you find the circuit that makes the tester blink along with the turn signal. Splice the yellow wire into that circuit. Then, activate the right turn signal, probe the wires until you find the right one then splice the green wire into that. Then, activate the...
view full answer... - Does Hopkins 7-Way part # HM40975 Fit 2002 Chevy Silverado 2500HDYes, the Hopkins 7-way part # HM40975 that you referenced does fit the round connector you sent in a picture of that you have on your 2002 Chevy Silverado 2500HD.
view full answer...
- Parts Recommendation for Adding 7-Way to 2022 Ford Transit T250I like the way you think! To get everything you need in a nice bundle I recommend the Tekonsha OEM Replacement Wiring Kit # 22114. This tees in behind the tail lights on your 2022 Ford Transit T250 and then comes with everything to get you that fully functioning 7-Way. It even includes a brake controller harness that fits directly to a Draw-Tite, Reese, Pro Series, or Tekonsha brake controller like the popular Prodigy P3 # 90195. To get the most out of your wiring setup I recommend also...
view full answer...
- 4-Pole/7-Way Trailer Connector for 2019 Nissan FrontierWe don't offer a kit that will do exactly what you're wanting to do, but there are some mix-and-match options that can get you the trailer connector setup you're wanting. By all-in-one, I assume you're speaking of something like part # HM40975. If your Frontier is a Canadian market vehicle, you can use the # 118282 and replace the provided 7-way connector with the # HM40975. If it's a US market vehicle, you'd unfortunately have to go with the full # 118266 kit, and replace the provided...
view full answer... - 7-Way Plug For 2010 Ford F-250 Super Duty Factory Tow Package and Trailer Side ConnectorI recommend Hopkins 7 and 4-pole trailer connector socket part # HM40975 for the factory tow package on your 2010 Ford F-250 Super Duty. This Hopkins trailer connector plugs into the OEM tow package wiring harness. I have attached an installation video for your reference. For the trailer side, I recommend Bargman part # WG54006-043 7-Way Molded Trailer connector. I like the Bargman 7-Way Trailer connector because it is coiled so it's less likely to get tangled or drag the ground. I have...
view full answer... - Parts Needed For Towing a Trailer With a 2022 Chevrolet BlazerFirst you will need the etrailer Trailer Hitch Receiver # e36YR for your 2022 Chevrolet Blazer. This receiver will fit all trim levels with the exception being the premier. It is rated for up to 750lbs of tongue weight and a trailer weight up to 5,000lbs. If you are using a weight distribution hitch the capacity increases to 6,000lbs. Be sure to verify with your Chevrolet dealer exactly how much your Blazer can handle and use the lower of these sets of numbers. For the wiring I recommend...
view full answer... - Is Pollack 7-Pole Pigtail Harness PK11998 Compatible with Hopkins 7-Way Vehicle Socket HM40975Yes, the Pollack 7-Pole Pigtail Harness # PK11998 will plug right in to the back of the Hopkins 7-Way Vehicle Socket # HM40975. Both of these parts use the standardized round U.S. Car connector format so they are compatible. The wiring configuration for the harness leads is as follows: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow...
view full answer... - Replacement 7/4-Way for 2021 Dodge DurangoWe have a replacement 7-way/4-way that fits your 2021 Dodge Durango with the part # HM40975 but we don't have any options that would integrate into the OEM trailer wiring mount if that's what you are asking about. Only option for that would be to check with Dodge.
view full answer... - Replacing Factory 7-Way on 2010 GMC Sierra with a 7- and 4-Way Trailer ConnectorYes, you can replace the factory 7-Way only on your 2010 GMC Sierra with a 7- and 4-Way connector. You will need # HM40975. It also includes a mounting bracket and hardware since it will not fit in the same place as the factory connector.
view full answer... - Replacement for 7-Way Pigtail on 2015 Toyota Tacoma With Hopkins Connector HM40975What you will need to do is hardwire in a new pigtail that will fit in the 7- and 4-Pole Trailer Connector Socket # HM40975. The part you will need is the 4' Pigtail Wiring Harness for Pollak Replacement 7-Pole RV Socket # PK11998. I have added a link to a video review for you to check out as well.
view full answer... - Is There a Trailer Wiring Harness for a 2017 Mercedes Sprinter 2500 That Has Both 4 and 7-WaysThe Tekonsha OEM Replacement Vehicle Wiring Harness part # TK22115 is a great option for a 2017 Mercedes-Benz Sprinter 2500. It as you noted has a 7-way plug but there isn't a complete harness with both 4 and 7-way plugs as is. Therefore, I suggest just adding the 7- and 4-Pole Trailer Connector Socket part # HM40975 which also comes with a bracket that you'll need.
view full answer... - Troubleshooting Trailer Wiring Issue on 2006 Ford F350First, use a circuit tester like # PTW2993 on your trailer connector as a helper activates each lighting function and operates the manual brake switch on the brake controller. This helps isolate the problem to the trailer or the tow vehicle. If you're not getting signal on the left turn signal pin, access the wiring harness feeding the trailer connector, and probe the wires until you determine which one feeds the left turn circuit. If you get signal on the wiring harness behind the connector,...
view full answer... - Can I Add An Additional 4 Flat Plug To My 2019 Ram 1500Yes we have just the thing. To add on an additional 4 flat plug, you can use the Tekonsha # 118384. This will plug in line behind the factory 7 way plug and allow you to connect your additional lighting.
view full answer... - Parts Needed to Install 7-Way Traile Wiring Connector on 2011 Jeep Grand CherokeeTo install a 7-way on your 2011 Jeep Grand Cherokee that does not have the tow package you'll need to first start with a 4-way like part # 118425. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller...
view full answer... - No Running Lights from 4-Pole on Factory Connector of 2008 Dodge DurangoIt sounds like your 2008 Dodge Durango has a factory-installed combination 4-way/7-way trailer socket like # 30955 or # HM40975. Both of these replacement parts install using a round 7-pin U.S. Car connector that plugs in to the back of the socket. Please refer to the linked photo to see the rear of part # HM40975 that shows the round plug. First, test without your adapter. Make sure the main ground wire on the truck AND trailer is securely attached to a clean bare metal surface, one...
view full answer...
- 7-Way and Trailer Hitch Recommendation for 2019 Chevy Express VanSince you have the factory tow package wiring all you'd need for a 7-way is the part # HM40975 which attaches to the round connector you have at the rear of your vehicle and provides both a 7-way and a 4-way plus comes with a mounting bracket. Then for a hitch the etrailer hitch # e98861 is also a fit for your 2019 Chevy Express van. It's a really great option as it has higher towing capacities, installs very easily, and is priced great too. I attached an install video for this for you...
view full answer... - 7-Way Trailer Wiring Recommendation for 2018 Chevy SilveradoWhat you'd want is the 7-way wiring kit part # HM40975 which is designed to fit the cut out at the bumper of your 2018 Chevy Silverado 1500. The round connector or your truck will plug right into this adapter and the adapter fits the cut out of your truck perfectly. Check out the install video I attached for more info as well.
view full answer... - Can I Use Both Plugs on the Pollak 7 and 4 Pole Trailer Connector # HM40975 At The Same TimeI contacted our representative at Hopkins about the Pollak 7 and 4-pole Trailer Connector, part # HM40975. The representative informed me that you cannot use the 7-Way and 4-Way plugs at the same time as the two doors do not open up enough. Part # HM40975 will fit the 2010 GMC 1500, 2500, and 3500 series. I have linked an installation video of the # HM40975 connector for reference.
view full answer... - Does Hopkins 7-way/4-way Adapter HM40975 Fit 2014 Jeep Grand CherokeeYes, we've had the chance to install the Hopkins 7 and 4-way adapter part # HM40975 on a 2014 Jeep Grand Cherokee like yours and we found it fit and worked well. It plugs directly into the 7-way trailer wiring connector that is present behind the vehicle bumper. Check out the install video link I attached that shows this kit installed on a 2014 Grand Cherokee.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.