Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
8" Tall x 15" long wheel cribs can be used to lift your vehicle for service or display. Replaces cumbersome jackstands. High-density foam with durable protective coating. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps Wheel Cribs are sturdy, solid foam blocks that serve as a tough, but lightweight and rustproof alternative to jackstands. They keep your vehicle safely lifted 8" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. Additionally, you can use the cribs for display. To use the wheel cribs, raise your vehicle high enough to slide a crib under each tire, then lower your vehicle. The tires will sit snugly in the precision-molded concave cutouts.
These cribs are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each crib supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. The cribs are lightweight, weighing only 5 pounds per crib, so you can transport and store them with ease.
The cribs are covered with a textured coating and are flat on one side. This keeps them from skidding while your vehicle is lifted. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the race ramps wheel cribs with an eight inch lift for a quantity of two. Now these wheel cribs will provide eight inches of lift to service or display your vehicle. They are lots of safer, more stable alternative to any jack stands, and they'll give you much more clearance underneath your vehicle. They are lightweight blocks, make it very easy to use, transport, and store. You can see they have these nice strong integrated handles on each end to carry him with.These cribs are ultra strong high density EPS foam construction to ensure durability and stability. They're are solid core foam so they won't bounce or crack, and they have a nice textured coating on them to prevent these cribs from slipping or sliding, and resist water and automotive fluids.
They won't scratch, mark, or scrape your floor. These parts are made in the USA.Few specs on them, the application, these are for vehicles with tires up to 10 inches wide, and they'll fit tires with diameters between 24 inches to 30 inches tall. Weight capacity is 1500 pounds per crib, you can see it on the bottom here, so both of them, the total would be 3000 pounds. The weight on each crib is about five pounds, and this is for quantity of two real cribs.The last thing I want to give you is the dimensions on it. The length of it, the longest part is going to be right at 15 inches long.
Total height at the very tallest part will be right at nine and a quarter inches tall, and then the width on it, it's going to be right at 12 inches wide.But that should do it for the review on the race ramps wheel cribs with the eight inch lift for a quantity of two.
Ratings & Reviews
Great product and great customer servic e!!!!
Works great very light weight
Fast shipping!
Great product, and great customer servi ce!
They arrived! Top notch solid product, really happy with the purchase! Fast shipping as well!
GREAT SERVICE !!GOT MY RACE RAMP CRIBS IN 2 DAYS
Good product, good price, and quick shipping service!
These will be a back saver for me doing body work on the lower panels. Amazing how light they are and can still support 1500lbs.
Time to change oil again every 2,500 miles. 2020 718 Spyder with 3.5 inches ground clearance. 414 hp, 6 Spd manual. My birthday is 6/9/54 and will be 70 years old when I change the oil again. Old school mechanic. I raise the car 3 inches at a time to get to the crib height of 24 inches at the front ant rear.
Great job!! I feel much more safe underneath my car. Plus the Jackstands are all was in the way!!
I was looking for ramps so I could do most of my own service. These race ramps are very light and very strong and is exactly what I need to get the job done safely.
Very nice cribs. Light weight and seem to be able to support any vehicle. Much easier than ramps and stable for working under your vehicle. Bought two, need two more now!
Game changer. Much better than working on jackstands; more room, easier, and feels more secure. Glad I bought the 10" because its about as high as a regular jack will go. With these I can successfully hold off on buying a lift for a few more years.
The Race Ramps wheel cribs I ordered are exactly as advertised. eTrailer is an awesome company that clearly cares about customers. I have ordered from them before, and will order from them again. Their shipping times are great, and their customer communications are top notch. No COVID excuses, no changes after the order was placed, and no drama; just good old-fashioned customer service.
I really like the quality and how easy it is to move around! Light weight and strong!
Much better than jack stands!
Perfect for the job at hand, thank you!
We bought this item for our son in law who uses them in car shows for his 1968 Firebird. He is very happy with them.
Quality made products , works better than I thought , brings the car up to a good height to work under .I still will use jack stand with this product just for safety reason .all in all Satisfied with my purchase . Fast delivery. Thanks
I have a lift buried in the floor, my garage is only 8’ high, it is great to raise the car using the wheel cribs on one end and ramps on the other. The lift goes back to floor height=this and I slide a piece of plywood over the lift. The car is at a comfortable and safe height to pull a transmission or perform other tasks.
Tom
It was just what I was looking for! Works great! Thanks!
Absolutely love them! Perfect for maintenance on my car without being on jacks.
Frederick
8/8/2025
Still absolutely perfect for doing set up adjustments while sitting on the tires. Great for my Legend Car and the full size drag car.
Quality made product , use them all the time on my street rod project , a sense of security while working under your car . Worth the investment . Satisfied with my purchase .
Michael
12/6/2025
They are a Great Quality made product ,so glad i purchased these race ramps , they are very safe and easy to use . supports my 1940 Ply Street rod when im working under it and they give you the feeling of security while under any car or truck , Satisfied with my purchase .Thanks
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
8 E.
12/5/2024
Still use them today it was a good investment for me , I have a 1940 Ply street rod and they work out great , , they are at a good height to work under the car and they give you security to know that the car is supported as well for your safety. I would recommend these to anyone who works on cars and trucks they will pay for themselves in time .