Struggling with short, steep ramps that make loading stressful? Gen-Ys extra-long aluminum ramps give you a gentle climb, confident traction, and a stable fit on your trailer. Skip the worrying and load your heavy equipment with real peace of mind.
Highlights
Short ramps force you into steep, stressful climbs and risk bottoming out your gear. Gen-Y's 84" extra-long ramps deliver a gentle, predictable angle so you can roll heavy equipment up onto your trailer smoothly. No scraping, no stress.
Slippery ramps make loading risky, especially in wet or muddy conditions. These ramps feature serrated rungs spaced just under 5" apart, so your tires or treads get confident grip and you keep control in any weather.
Ramps that shift or wobble are a safety hazard. Gen-Y ramps lock onto trailer deck rails with a robust 90-degree angled extrusion and a wide, hooked end for maximum stability. These are designed specifically for trailer use and should never be used with pickup truck tailgates.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer. Today, we're checking out the Gen-Y Hitch Extreme Duty Aluminum Loading Ramp Set. Folks, these are seven foot long overall and 15 inches wide with an impressive 10,000 pounds rating. So 5,000 pounds per each individual ramp, and these only weigh about 41 pounds each individually. And as you can see, they're pretty simple to pick up. They're an impressive 3 1/2 inches thick from the side.
(ramp clunking) And as you can see, again, seven foot. Obviously, I have these pretty high on my demo table today. You most likely wouldn't have them anywhere near that steep angle. But you can see the nice, in there. Let me flip this up, so you can see a little better.
So you can see that right angle, that's gonna grab the edge of those loading trucks, flatbeds, whatever, and give you a nice sturdy hold when the time comes to load up. Now, let me go ahead and spin this around and give you a better view of the end. So you can see on the end, it's curved, so that's gonna help you go up into the trailer, or on top of the trailer rather, with ease. And then, from the top-down, you can see these rungs a little better, you got nice grip. When I was measuring earlier, again, 15 inches overall width on the ramps themselves.
And then, between the rungs, I got right at about five inches on center. And then, this way, I got four inches. Again, folks, these are gonna be a great option for you that can give you a gradual slope, that's gonna be easier. Again, I have it a little high here today for demo. But again, 84 inches long is gonna give you that nice gradual slope.
And with the nice ends at the bottom and the top, loading it should be pretty easy, you're gonna have maximum traction even with with them being wet, because they have that grip on the treads. And again, lightweight, aluminum construction, you don't have to worry about rust, corrosion. They're easy to pick up, easy to store when the time comes. Now, the recommended deck height is gonna be a minimum of 15 inches off the ground to a max of 36 inches off the ground. And just so you know, where I'm sitting on my tabletop, I'm at 40 inches from the ground to my tabletop. So again, you would only be able to safely use these at about something like that, 36 inches. So keep that in mind. If you have any questions about this or any of the products, reach out to us, we're more than happy to assist you in any way we can. I'm Steven, thanks for watching. Have a great day.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Purchased the ramp extensions to eliminate the problem of my car scraping on the trailer ramps. The extensions reduced the angle of the ramps and eliminated the scraping. Being very light weight, the ramp extensions are easy to handle. They are very well made and stand up to repeated uses and driving vehicles over them.
Every thing was good took a little longer than what was stated and had to meet driver because of location couldn’t get tractor trailer in , but overall everything was good
Well built and able to move alone.
Shipment came with deep gouges on corners of tube. Will watch for cracking and bending due to damage
I load 7500 lb. equipment with them and they still look fantastic and showing no wear.
The quality and materials used in construction was quite a bit more than what I had expected. These ramps are quite a prize.
They arrived at my location late last night, however, one could tell immediately construction and material was quite above average… This is a 4.0 Piece of gear.
Great price on awesome ramps. Would I highly recommend these ramps and etrailer!
These ramps (Gen-YHitch 7’ long , 6000 lbs.)are great. They are light weight but very strong. I am using these ramps to load a 3500 lb. tractor. There is little to no flexing of the ramps as I load this tractor. Great ramps!!!
Well built, nice ramps, only used once but they seem great
good quality
Well made and much lighter than steel r amps.
Product works great for me no problem loading vehicles on my trailer. Their light weight and easy to hook to my trailer. Wide rungs . Over all worth the money I invested in them.
Haven’t unboxed them yet but look good so far .
Great for loading 4,000lbs mini skid steer onto 450 flatbed truck.
No more dealing with the back breaking steel ramps that came with my trailer.
These ramps are very well built and lightweight to move around. They easily held my 6500 pound skid loader.
Great build quality,Fast shipping.I would buy from this company again.
Well built, look great, fit my trailer great, haven't pulled truck onto them yet but dont think their will be any issues w my short bed square body chevy.
I'm 70 plus years now. I can still move these slowly but at least I can do this on my own...for now. The ramps before were steel but to short for my use with my custom lowered classics I own. The do a great job, however, getting them up into my bed of my truck is tricky at my age. My current vehicles are just a bit to low to allow the ramps to sit underneath on the trailer deck. One of my son's will help me load up the vehicles but at least I can still do most on my own. I just used these this past weekend to trailer up my vehicles for a local car show.
Thank you for the suggestion through the chat service. When not in use I strap them down tight to the trailer bed. I might be looking at a custom fab to slid these under my trailer if there is room. Thank you again. I truly enjoy this wider and longer ramps.
The ramps work good for me, I carry a small car in the back of my pick-up, for me the ramp angle is acceptable and the capacity of the ramps is well over the load that I apply (I don't drive up, I have a bed mounted winch I use).
The ramps are awesome, five star, but I REALLY should have purchased the 8’ ramps. (Seriously, very well built and qualify product.) I do not have drop axles on my trailer so the incline for the 6’ ramps is steeper than I like. Unfortunately for me I already used them so returning was not an option and I don’t have the money to just buy another set so I have to make these work.
If you are thinking of these ramps do not doubt yourself, get them. Just be mindful of the load angle and if not 100% sure, get the 8’ ramps. Really wish I got the 8’ ramps.
Nice ramps! This is where my 550 Spyder lives
Excellent quality... superior strength.....very portable......BUT the end of the ramp that you hook to the trailer is not "deep" enough allowing the ramp to fall to the ground as the vehicle tire rolls on to the trailer. This does not happen all of the time, but does happen enough to be a serious problem getting the ramp, using multiple jacks, to get the ramp reattached to the trailer. Adding 1-2 inches onto the "hook" end of the ramp ( ie making it deeper) would solve the problem. I would then rate it a 5. Hopefully the manufacturer will read this and make an inexpensive and quick adjustment to their manufacturing process and the problem will be solved.
Awesome place to do business with. I order heavy duty ramps for my traier. Cheapest place i found them. They came in within 4 days. The exact day they said they would be delivered. Amy stayed in contact with me through email from day one. 100% recommend doing business with these folks. I know i will from now on!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.