2-1/2" Tall x 14" long ramps let you lift your vehicle directly onto racing scales. Ramp incline creates a 8.7 degree angle of approach. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps Scale Ramps can be used to lift your vehicle directly onto 2-1/2" tall racing scales. The ramps have a 8.7 degree angle of approach, which allow you to lift a low-ground-clearance vehicle onto a scale without worrying about scraping its front end. This eliminates the need for heavy jacks and cumbersome jackstands.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. The ramps are lightweight, weighing no more than 1 pound per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the Race Ramps, race scale service ramps. These are a 2-1/2 inch tall ramp, so it's going to allow us to get our vehicle up on the 2-1/2 inch racing scales. We're not gonna have to worry about any heavy jacks or cumbersome jack stands. Each ramp is right about 14 inches long.
So the 2-1/2 inch rise over our 14 inch run is going to give us a 8.7 degree angle of approach, which is going to be perfect for your vehicles with low ground clearance. Our total width, we're looking at just shy of 12 inches, right about 11-3/4 of an inch, so it is going to be compatible with tires up to 10 inches wide.These are very lightweight. They only weigh about one pound per ramp, so they're going to be very easy to transport and store, switch out when we need them. They are made of a very ultra strong, high density EPS foam construction that's going to ensure a durable and stable use. These can hold up to 1,500 pounds per ramp, so 3,000 pounds per axle.
And because they have that solid core foam, they're not going to bounce or crack. So very dependable for you. You can see this textured finish here, this is going to help prevent the ramps from slipping or sliding. And it's also going to help them resist water and automotive fluids.You don't have to worry about them scratching or marking, scrapping your floor. You can see I've got a white piece of paper here on my table, run that over it a few times and there's no abrasions there so it's going to do a good job for you.
You're not going to have to worry about any sort of marring. But it is very stable. It can probably move my whole table just by pushing on this, so it's going to give you that nice grip onto the floor so you don't have to worry about them slipping out and sliding, anything like that. This kit does come with the four ramps that you see here. So obviously one per tire.
These are made here in the USA, and they do come with a one year limited warranty from Race Ramps. That's going to complete our look at the Race Ramps racing scale service ramps. Thanks for watching.
Easy to order, shipped on time. Great product and price.
Got what I ordered and got it quickly excellent transaction
These ramps are light, durable and easy to use. We use them in our race shop to get the car a little elevation or when we want to put the car on scales quickly. They have been knocked around quite a bit and still holding up well.
Great communication, price, and experience. We had a back order item from the manufacturer. The communication through the process with updated ETA's was spot on... thank you very much.
I needed these to elevate the ramps to my lift so the low bumper of my car wouldn’t scrape. They do the job perfectly and are much easier to manipulate than 2x10’s!
Ramps rated for 1500 pounds but under heat of the day don’t believe they can take that. People at Race Ramps are rude and not helpful at all.
Great Ramps and a year later have held up great with regular use to help load a trailer! 5 Star highly recommended and Race Ramps product!
Great product and fast shipping!
Great Product, Thank You!!
Works great!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.