Classic Accessories DryGuard Waterproof Boat Cover - 17' to 19' Long - Up to 102" Beam

Part Number: CA20086

14 Reviews | 9 Questions

In Stock

$226.24

Retail:$385.22

You Save: $158.98

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

classic accessories boat covers dryguard waterproof cover - 17' to 19' long up 102 inch beam

classic accessories boat covers v-hull cover dryguard waterproof - 17' to 19' long up 102 inch beam

Show All (2) Product Images

Show Fewer Product Images

Videos

Feature Review Classic Accessories DryGuard Waterproof Boat Cover

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Perfect for trailering, this durable, waterproof cover will keep your boat's interior clean and dry no matter what weather you drive through. Environmentally friendly, PVC-free fabric resists mildew and UV rays. 1-800-940-8924 to order Classic Accessories boat covers part number CA20086 or order online at etrailer.com. Free expert support on all Classic Accessories products. Great prices and Fastest Shipping for Classic Accessories DryGuard Waterproof Boat Cover - 17' to 19' Long - Up to 102" Beam. Boat Covers reviews from real customers.

All Info
Reviews (14)
Q & A (0)
Related Parts
Photos

Classic Accessories Boat Covers - CA20086

Features:

Waterproof, tear-resistant cover is perfect for boat storage and trailering in any weather
DryGuard fabric is PVC free and waterproof
- Resists weather, mildew and UV rays
- Made according to bluesign standards
Taped seams keep moisture from seeping in
2 Rear air vents have built-in stiffeners
- Reduce wind pressure
- Minimize lofting
- Allow interior moisture to escape
Reinforced panels at bow, stern and windshield offer additional protection
Adjustable straps snap into quick-release buckles for fast, easy fitting
Elastic cord runs through bottom hem for tight custom fit
Mesh storage bag included
Tan color complements many boat hulls

Specs:

Application: V-hull runabouts
- Length: 17' - 19'
- Beam: up to 102"
5-Year warranty

Measure the length and beam width of your boat to ensure a proper fit.
- Length: Measure in a straight line from the tip of the bow to the stern. Include any rear deck extensions (platforms). Do not include bow spirits, rudders, outboard motors, motor brackets, handles, or other fittings and attachments. Note: Do not measure up and over the windshield.
- Beam width: Measure the boats flat width at its widest point usually near mid-ship.

20-086-112401-00 Classic Accessories DryGuard Waterproof Boat Cover - Tan

Customer Satisfaction Score:

94% were satisfied with this product

6% of customers were not satisfied

Wrong item was ordered

6% of customers were not satisfied

Wrong item was ordered

4.4

14 reviews

5 Stars		(9)
4 Stars		(3)
3 Stars		(1)
2 Stars		(0)
1 Star		(1)

by: Chris 11/07/2023 One Year Later

Boat and cover has been under dry outdoor storage for a year. This includes extreme cold and moist climate conditions.
There has been no noticeable change in the cover since my purchase a year ago.

by: James 08/23/2024 One Year Later

I have owned three of this cover over the years. every cover has lasted around three years. this cover is one of the best on the market.

by: gary 07/03/2016

the item I ordered was out of stock, so it took extra time to get here did not make it in the seven days as stated but all is well. good service.

by: Diane 08/29/2020 One Year Later

The cover is very well made and fits our boat great!

by: Dan 05/12/2026 One Year Later

by: Dean 10/04/2024

Great fit nice straps fast shipping

by: Matt 09/28/2020

I have 15 ft. Aluminum deep V fishing boat so my first order was for a 14-16 FT cover.
Too small, couldn't 5 out of 9 tiedowns. Barely covered gunnels and there was no way the anti-pool bows would work. Sent back, ordered a
16ft-18ft. Cover. As you see in pics it fits with the bows in place. Oversize for sure but $100s of dollars cheaper than a custom made cover!
Perfect for in place storage and with more attention to tying down you could tow it.
Quality material, feels like it will last quite some years. Solid, quick tie down straps and enough of them. etrailer kept me informed about shipment, took the first cover back no problem.
Excellent customer service.

Click to Enlarge

by: Ted 09/01/2022 One Year Later

Fits great keep boat dry and the dust out.customer service was great!

Ted One Year Later

9/2/2023

Cover fits well and easy on and off

by: Shirley 02/22/2022 One Year Later

Works in NW winters! Excellent cover.

by: Michael 10/20/2021 One Year Later

This universal cover works as expected. It keeps stuff out of the boat when not in use.

by: Stephen D. 08/03/2017 One Year Later

The cover has already tore and it was not repairable.

by: Dave 05/11/2023

We’ll made, good fit.

by: Peter 12/01/2017

GOOD FIT

by: Anne 10/02/2022

true

See what our Experts say about this Classic Accessories Boat Covers

Do you have a question about this Boat Cover?

Comparing Classic Accessories Boat Covers for 2015 Crestliner Raptor
Either the Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98") # 052963889383 or the Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam # CA20085 will work for your 2015 Crestliner Raptor. The differences between the covers is the Storm Pro # 052963889383 comes with the support pole to keep water from pooling and yet doesn't have taped seams, so water can find its way in at the needle holes. The Dry Guard # CA20085 does not come...
view full answer...
Boat Cover Recommendation for a 17 ft Bristol Skiff
The center console of your Briston Skiff is pretty low so it would not interfere at all with the Classic Accessories DryGuard Waterproof Boat Cover # CA20086 installing. Based on the other dimensions that you listed this cover would fit and work well.
view full answer...
Will Classic Accessories 17 to 19 Foot Long V-Hull Boat Cover Fit a 2002 Monark King 190
Like you said, the Classic Accessories cover # CA20086 fits 17 to 19 foot long V-hull boats. It also fits beams up to 102 inches wide. It does not seem like width would be an issue. Provided the cover supports you have do not reach up higher than the wind screen, if applicable, then I do not foresee there being a problem. You could step up to the next highest size, # CA20087, which fits 20 to 22 inch long V-hull boats and beams up to 106 inches. But if it is too large it would not fit...
view full answer...
Recommendation of V-Hull Runabout Boat Cover for a 1996 - 1999 17-19 Foot Boston Whaler Outrage II
Currently we offer 2 boat covers that will work based on specifications of your 1996-1999 17-foot Boston Whaler Outrage II. From my research it looks like your boat is roughly 204-211-inches long and the beam is 84-inches. Which equals 17 to 17-1/2 feet long and 7 foot beam. These boat covers will fit a 17-19 foot boat and up to 102-inch beam: The StormPro # 052963889482 and DryGuard # CA20086. They both have quick release buckles and adjustable straps to provide easy fitting and trailering...
view full answer...
Boat Cover Recommendation for Crestliner SportFish 1850
Since the cover gets tightened with straps going with a slightly larger cover would be the way to go as it would make the install a bit easier and could be tensioned to fit the boat just fine. Looks like the # CA20086 would be the way to go.
view full answer...
What is Classic Accessories' DryGuard Fabric and Will DryGuard Cover CA20085 Fit 17-Foot Bayliner
The 17-foot, 9-inch length of your 2007 Bayliner will be fine with the Classic Accessories DryGuard Waterproof Boat Cover # CA20085 so you'll just want to measure the boat's beam (width at the widest point) to confirm it does not exceed the 98-inch maximum for the cover. It will fit fine with your windshield. If you find you need a slightly larger cover you can use DryGuard cover # CA20086 which fits boats up to 19-feet long and up to a 102-inch beam. The DryGuard material is a 300-denier...
view full answer...
Recommended Boat Cover for a 18' x 98" V-Hull Boat
As long as your boat's beam (width of the widest point) does not exceed the 98 inches, the Classic Accessories DryGuard Boat Cover for 98" Beam # CA20085, it will fit your boat. I would not recommend choosing the larger size as boat covers are meant to fit snug to act as a seal to protect your boat. However, if your boat beam is a little larger than 98" I would recommend the Classic Accessories DryGuard Waterproof Boat Cover for a 102" Beam # CA20086. This cover will provide the best...
view full answer...
Cover Options for an 18 Foot V-Hull Lund Boat
We have lots of covers that could fit your 18 foot Lund. Do you know the specific model Lund boat you have because that would help determine the right line of covers to look at. Cover # CA20086 for example fits V-Hull boats 17 to 19 feet long and with up to a 102 inch beam. We also have # 052963889383 for 16 to 18-1/2 foot V-Hull boats with up to a 98 inch beam. A snug fit will help prevent excess cover from coming loose but if the beam is wider than what the cover will fit then you would...
view full answer...
Boat Cover Recommendation for a Crestliner Tri Hull 17 Feet Long
Since your hull is 17 feet in length you would want the part # CA20086 as it is designed for boats that are 17-19 feet in length and the part # CA20084 is designed for boats 14 to 16 feet in length.
view full answer...

Do you have a question about this Boat Cover?

Info for this part was:

Written by:

Lindsey S

Expert Research:

Michael H

Expert Research:

Jameson C

Video Edited:

Jacob T

Video by:

Chris R

Updated by:

Wilson B

Updated by:

Erin H

Updated by:

Isabelle B

Installed by:

Adam E

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.