Keep water from pooling in your boat cover by raising it in the center with this adjustable support pole. 3 Types of endcaps fit almost any kind of boat cover. Durable aluminum won't rust or corrode.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the Taylor Made Adjustable Support Pole for boat covers. Now this boat cover support pole will help extend the life of your boat cover, and the way it does it is basically when you install your boat cover onto your boat, it'll normally just lay over the top of your boat, it protects the interior of your boat from the weather, but when it starts to rain, the rain water will accumulate in the low spots of that boat cover and the weight of the rainwater will push down on the cover and form pools of water that over time could damage the cover. So what you will do is you use this aluminum support pole that you can put in the middle of the boat, and then extend this out to raise that boat cover up and create a slope to allow the water to run off so it won't just pull up on there.And this does adjust from 36 inches when it's fully extended and then you tighten it down. It would be right at 64 inches long. And you can put it at whatever height you might need it, and then tighten this down and it'll hold it into that height. But the other nice thing I want to mention on this as they have a nice feature on it that if you happen to have a boat cover that might use female canvas snaps to attach it to or has grommets in the boat cover, what you could do is just pop off this regular plain rubber end and underneath is a male canvas snap that'll snap onto the female canvas snap and that'll hold it into place.
Or if you have a boat cover with the grommet on it, pull this out all the way, reverse it, slide it back in this way. It has a hard plastic point to it that'll insert into the grommet and hold your boat cover in place.So it has those extra features that'll make it work on all different types of boat covers. inaudible 00:01:39 slide it back in, we'll put the cover back on there. But that should do it for the review on the Taylor Made Adjustable Support Pole for boat covers.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Keep water from pooling in your boat cover by raising it in the center with this adjustable support pole. 3 Types of endcaps fit almost any kind of boat cover. Durable aluminum won't rust or corrode.Product was as advertised and delivered a couple of days ahead of scheduled. The poles work perfectly - replacement poles for ones that came with boat and cover.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.