Hey Ben, yes you can use the Truxedo Boat Windshield Cover part #TX38FR on a windshield that is taller than 25 inches and it will still work. How much taller is yours though?
Hello Chad, thanks for reaching out. Yes, the SuperSprings Custom Suspension Stabilizer and Sway-Control Kit #SSA24 is the correct fit for your 2005 Chevy 3500 with factory upper helper springs. The #SSA24 will fit models with or without the top…
Either the Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98") #052963889383 or the Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam #CA20085 will work for your 2015…
Hey John! Yes, the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-440-2-G-EZ-1K looks to be exactly what you're needing! What boat trailer do you have?
Hey Peter! Hopefully nobody was hurt, including your camper. Since you have a trigger latch I would add a lock like the InfiniteRule Trailer Coupler Lock #IR58FR. This will keep it secure while you're hooked up to the ball mount on your vehicle…
Hey Paul, I believe we do have a solution that will work with the Bearing Buddy part #BB2328 which is designed to fit a hub bore that measure 2.328 inches.
Hey Steve, congrats on the new truck! The B&W Ball and Safety Chain Kit item #BWGNXA2061 is a great setup but it's not going to work with the Anderson item #3220 because of that carrying handle. Instead you're going to want to pick up the…
Hey Michael! The Andersen Aluminum Ultimate #3220 fits all standard gooseneck hitch brands. The best option is the B&W Ball #BWGNXA2062 you looked at. This is really easy to use with the grab handle which also keeps your hands nice and clean. It…
Hey Rob! Both the 25-1/4" long item #DX95CR and item #e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs…
Hey Vince, thanks for all of the info on your spindle. Based on that what you have it is actually a spindle for a 3,500 lb axle so you'd need a larger hub and drum like the part #84546UC3-EZ which is a 10 inch diameter hub/drum. Then for brake…
Yes the springs will work, but you're likely going to need to add a spacer. Just because you have a 3.5" lift does not necessarily mean you'll need a 3" spacer, so you're going to need to install the upper and lower mounting…
If the rear suspension on your 2020 Ford F-250 is lifted, there is a decent chance that some additional spacers will be needed when installing the Air Lift LoadLifter 5000 Air Helper Springs #AL57391 for 2WD or #AL57399 for 4WD. The best way to…
Hey Ben, yes you can use the Truxedo Boat Windshield Cover part #TX38FR on a windshield that is taller than 25 inches and it will still work. How much taller is yours though?
Hello Chad, thanks for reaching out. Yes, the SuperSprings Custom Suspension Stabilizer and Sway-Control Kit #SSA24 is the correct fit for your 2005 Chevy 3500 with factory upper helper springs. The #SSA24 will fit models with or without the top…
Either the Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98") #052963889383 or the Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam #CA20085 will work for your 2015…
Hey John! Yes, the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-440-2-G-EZ-1K looks to be exactly what you're needing! What boat trailer do you have?
Hey Peter! Hopefully nobody was hurt, including your camper. Since you have a trigger latch I would add a lock like the InfiniteRule Trailer Coupler Lock #IR58FR. This will keep it secure while you're hooked up to the ball mount on your vehicle…
Hey Paul, I believe we do have a solution that will work with the Bearing Buddy part #BB2328 which is designed to fit a hub bore that measure 2.328 inches.
Hey Steve, congrats on the new truck! The B&W Ball and Safety Chain Kit item #BWGNXA2061 is a great setup but it's not going to work with the Anderson item #3220 because of that carrying handle. Instead you're going to want to pick up the…
Hey Michael! The Andersen Aluminum Ultimate #3220 fits all standard gooseneck hitch brands. The best option is the B&W Ball #BWGNXA2062 you looked at. This is really easy to use with the grab handle which also keeps your hands nice and clean. It…
Hey Rob! Both the 25-1/4" long item #DX95CR and item #e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs…
Hey Vince, thanks for all of the info on your spindle. Based on that what you have it is actually a spindle for a 3,500 lb axle so you'd need a larger hub and drum like the part #84546UC3-EZ which is a 10 inch diameter hub/drum. Then for brake…
Yes the springs will work, but you're likely going to need to add a spacer. Just because you have a 3.5" lift does not necessarily mean you'll need a 3" spacer, so you're going to need to install the upper and lower mounting…
If the rear suspension on your 2020 Ford F-250 is lifted, there is a decent chance that some additional spacers will be needed when installing the Air Lift LoadLifter 5000 Air Helper Springs #AL57391 for 2WD or #AL57399 for 4WD. The best way to…
Filters
