Comparing Classic Accessories Boat Covers for 2015 Crestliner Raptor

Published 06/11/2019

Products Featured in This Question

Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98")

(44)

$163.38

Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam

(13)

$202.22

Classic Accessories DryGuard Waterproof Boat Cover - 17' to 19' Long - Up to 102" Beam

(13)

$211.78

Classic Accessories DryGuard Waterproof Boat Cover - 20' to 22' Long - Up to 106" Beam

(13)

$239.44

Question:

Sorry, my typing did not come out correct on my first question to you. I typed 188. The correct length is 18 feet 8 inches. Thus the question if the cover you recommend CA20085 will cover the 18 feet 8 inch bow plus the 6 inch extra for trolling motor for a total length of 19 feet 2 inches. Thanks

asked by: Robert P

Helpful Expert Reply:

Either the Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98") # 052963889383 or the Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam # CA20085 will work for your 2015 Crestliner Raptor.

The differences between the covers is the Storm Pro # 052963889383 comes with the support pole to keep water from pooling and yet doesn't have taped seams, so water can find its way in at the needle holes. The Dry Guard # CA20085 does not come with a support pole but has reinforced layer at windshield and has taped seams so no water will get it. It relies on the outside edges being pulled tight to keep water from pooling.

Neither cover has the rear straps but the rearmost strap of each keeps the elastic cord from the bottom hem tight.

expert reply by: Jason S

click to enlarge

Bob

6/11/2019

I read the answers you submitted. As a followup I just want to confirm that the DryGuard CA20085 listed as up to 18-1/2' will fit over my trolling motor and be long enough to cover the 6" extension of the trolling motor past the bow ?

Jason S.

6/11/2019

The measurement you gave was 188 inches which is 15-1/2 feet long, so when you add the 6 inches for your boat trolling motor prop that would take it to 194 inches which is just over 16 feet. The Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam # CA20085 will absolutely cover that and give you some additional room if needed. When cinched down that will still give a firm hold on the cover. If the prop is sharp, I recommend adding something to it like part of a foam pool noodle or something to protect the cover from cuts.

Bob

6/11/2019

Jason S.

6/11/2019

Got it. The 19 feet 2 inches would require a different cover. The Classic Accessories DryGuard Waterproof Boat Cover - 17' to 19' Long - Up to 102" Beam # CA20086 would be a little tight so I recommend the Classic Accessories DryGuard Waterproof Boat Cover - 20' to 22' Long - Up to 106" Beam # CA20087 for the best fit for you so the cover isn't to tight in any specific location allowing you to cinch it as needed for correct fit with that trolling motor location.