Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2006 Chrysler 300
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Part Number: TLT2310
In Stock
$465.45
2006 Chrysler 300
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2409)
- Q & A (0)
- Photos
TorkLift Truck Camper Tie Downs - TLT2310
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- Stable Camper Handling: Frame-mounted tie-downs distribute weight evenly and lower the camper’s center of gravity for a steady ride.
- Damage-Free Install: Bolts to factory frame holes with little to no drilling or truck modification.
- Clean Truck Look: Removable arms tuck under the body so the brackets stay nearly invisible.
- Secure Turnbuckle Setup: Dual anchor holes let you fine-tune the angle for a tighter, safer hold.
- Built to Last: Black powder-coated steel resists rust and corrosion from travel and weather.
Features to know about
Stable Handling on Every Mile: Frame-Mounted Front Tie-Downs
These front tie-downs mount directly to your truck’s frame, the strongest part of the vehicle, so your camper weight is distributed evenly and the center of gravity stays low. That means you avoid a top-heavy setup that sways in crosswinds or shifts on rough roads. With the camper locked tight to the frame, your truck handles like it should whether you’re headed across town or across the continent.
Install Without Drilling: Custom-Fit Mounts
Each tie-down bolts to pre-existing holes in the frame for a straightforward, no-drill install. Because they’re designed for a custom fit, there’s no cutting or modifications needed and only minimal loss of ground clearance. The result is a strong, secure setup that’s easy to put together in your own garage with basic tools.
Keep Your Truck Looking Clean: Removable Arms
When you’re not hauling your camper, you can pull the tie-down arms out of the brackets so they’re barely visible. The mounts sit tucked up under the frame, so they don’t spoil your truck’s lines or hang low. You’ll hardly notice they’re there until it’s time to load up again.
Built Tough for Long Trips: Powder-Coated Steel Construction
Made from black powder-coated steel, these tie-downs stand up to road grime, moisture, and salt without rusting or weakening. The heavy-duty finish protects against corrosion during long hauls and rough weather so your setup stays solid season after season.
Secure, Adjustable Connection: Two Anchor Holes per Arm
Each arm has two pin holes so you can extend it just enough to clear sidewalls or fenders and line up your turnbuckles (sold separately). The dual anchor holes on the plate help you dial in the best angle for a strong, stable hold that keeps your camper from shifting.
Specs
T2310 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
This Product Fits The Following Vehicles
- 2017 - 2021 Toyota Tundra 6-1/2 Foot Bed - Double Cab - 4WD - no running boards or cab length only boards - factory hitch
Customer Satisfaction Score:
81% were satisfied with this product
19% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Defective
Ratings & Reviews
4.7
2409 reviews
by:
Paul
04/14/2021
The rear camper mounts took 10 minutes each to install. The front ones took 22 minutes each. The mounting brackets are well built and designed. It would have been nice if the install instructions we’re online so we could have read them before we received the mounts.
by:
Hal
09/09/2020
TorkLift frame mounted tie downs are awesome. Just installed them today on the new Tundra and they are impressive. I have used Happijac tie downs in the past and they work and do the job. I wanted something a little beefier and TorkLift is definitely what I was looking for. Fairly straight forward install, takes a little tinkering but the fit is perfect and there is no doubt TorkLift did their homework. Great quality steel and welds look good. Great work TorkLift! Ordering from etrailer is always easy and they seem to have customer service dialed. They have better information on their site than most manufacturers.
by:
Eric H
07/20/2020
This was a perfect fit on my 2017 Tundra. Installation took about 30-45 min per side. The most difficult step was threading some bolts through the frame holes. They hide nice when not in use.
by:
Dennis
02/29/2024
2002
Toyota
Tundra
these fit my '21 toyota tundra perfect. It took a little bit to figure out the instructions but once we got one side, the other side went well. two of us installed front and rear mounts in a little over an hour. I had Torklift on my 2002 tundra and they were very secure for my slide in, that's why I got them again for my new truck.
by:
J In Tucson
04/10/2020
I installed these on my 2018 Toyota Tundra myself. As advertised, they fit into existing bolt holes and installation was straightforward. My slide-in camper attached as advertised and the unit has been trouble free through some rough off road travel.
I recommend this item highly and prefer it to my previous camper tie down system.
I recommend this item highly and prefer it to my previous camper tie down system.
J T.
4/12/2021
wonderful, as expected
by:
Robert
12/31/2019
2019
Toyota
Tundra
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Robert
1/3/2021
Good
by:
Howard
08/26/2019
2018
Toyota
Tundra
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
by:
Marlin
12/28/2022
Tie-downs work fine, as expected. Now I need to get better attachments!
by:
John
06/25/2019
Toyota
Tundra
Got them a couple hours ago. already installed. No problems ,they look very strong or over built . good product. I installed them on my 20016 Toyota Tundra double cab, 6 1/2' bed.
by:
Brian
10/03/2020
Quick shipping on half my order. Just like last time.
by:
Joe
07/02/2022
Fast shipping, great product.
by:
Joel
06/27/2023
You guys are very nice but I haven’t followed up on my back order line you said you would
by:
Steve
03/24/2022
These are perfect, easy to use and work well. What I like most is I tighten them down and the stay tight.
by:
Kevin
11/17/2021
2019
Toyota
Tundra
Missing most of the hardware.
Sierra K.
11/19/2021
Customer Service will reach out to you!
by:
Keith
07/18/2021
Top quality product.
by:
Scott
05/11/2021
Knowledgeable staff, well appreciated.
by:
Paul
12/21/2021
Great service , quick deliveries
by:
David
09/10/2022
stronger than I expected. Wow
by:
Jennifer
05/16/2025
by:
Daniel
07/21/2024
by:
Corey
07/14/2021
by:
Mary K
04/25/2024
by:
Gerry
07/02/2021
by:
Calvin
09/09/2021
by:
Eric
02/16/2021
25
2409
true
Show More Reviews
See what our Experts say about this TorkLift Truck Camper Tie Downs
- Availability of Front and Rear Torklift Camper Tie Downs for 2019 Toyota TundraHey Adam, we do have the front and rear Torklift camper tie downs separately for your 2019 Toyota Tundra. For the front it's part # TLT2310 and for the rear # TLT3306.
view full answer... - Does TorkLift Make Camper Tie Downs For A 2017 Toyota Tundra With The 5.5' Bed?Hello Henry. The TorkLift Front Tie Downs # TLT2310 will only fit 2017 Tundra models with the 6.5' bed. I double checked with TorkLift and unfortunately, they do not offer any fits for a Tundra with a 5.5' bed at this time.
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2021 Toyota TundraNo, the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3304 would not be the correct fit for your 2021 Toyota Tundra. The correct rear tie-downs for your 2021 Toyota Tundra are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3306. We also have the front tie-downs # TLT2310 and turnbuckles # TLS9529-2-LK available.
view full answer... - Camper Tie-Downs for 2021 Toyota Tundra 4x4 Double Cab 6-1/2 Foot Bed & Factory HitchFinding the right tie-downs can be a chore, so it's smart to double check, and we do have the exact camper tie-downs you need for your 2021 Toyota Tundra 4x4 Double Cab with a 6-1/2 foot bed and the factory trailer hitch. I verified with TorkLift for you that the correct tie-downs are the following: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2310 - Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3306 These will be a perfect fit on your Tundra, and the only...
view full answer... - Available Tie Downs for a 2017 Toyota TundraWe do have a few options for you to add camper tie downs to your 2017 Toyota Tundra, but it depends on some of the specifics for your truck. Since you have the running boards that go to the cab and an OEM hitch I have narrowed down your options to the following: Double Cab - 4WD - 6.5' bed - Front Steel Tie Downs # TLT2310, Rear Steel Tie Downs # TLT3306 Crew Max - 4X2 - 5.5' bed - Rear Steel Tie Downs # TLT3306 Crew Max - 4WD - 5.5' bed - Rear Steel Tie Downs # TLT3306 If you have any...
view full answer... - Recommended Frame Mounted Camper Tie-Downs for a 2019 Toyota Tundra Double Cab Short BedYes, I checked with TorkLift and can confirm the correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2019 Toyota Tundra Double Cab with 6-1/2' bed, Factory Hitch, and Running Boards (Stop at Cab) is part # TLT3306 for the rear and part # TLT2310 for the front. If you don't already have turnbuckles then I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK which are stainless steel so they won't rust.
view full answer... - Rear Mounted Camper Tie Down For 2021 Toyota TundraWe do carry rear camper tie downs, however for your 2021 Toyota Tundra, we only have the TorkLift Custom Frame-Mounted Camper Tie Down # TLT2310. You could also use the Brophy Clamp On Camo Tie-Downs # HSAB with the turnbuckles # TDHP.
view full answer...
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Amanda K
Written by:
Amanda M
Installed by:
David F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dennis
3/3/2025
Still working great, its the only way to go if you have a slide-in camper.