bing tracking image
  1. Watersport Carriers
  2. Yakima
  3. Paddle Board
  4. Roof Mount Carrier
  5. Aero Bars
  6. Factory Bars
  7. Round Bars
  8. Square Bars
Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards
Yakima

Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards

Part Number: Y04075
$398.95
Watersport Carriers
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars. Great Prices for the best watersport carriers from Yakima. Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards part number Y04075 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (32)
  • Q & A (0)
  • Photos

Yakima Watersport Carriers - Y04075

  • Paddle Board
  • Roof Mount Carrier
  • Aero Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Saddle-Style
  • Yakima
  • Clamp-On
  • No Load Assist
  • Rear Loading
  • Fixed

This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.


Features:

  • Roof-mounted carrier holds up to 2 stand-up paddleboards (SUPs) fin side up on your roof rack crossbars
  • Integrated stainless steel straps secure your boards to the carrier
    • Straps adjust along built-in tracks to accommodate boards up to 36" wide
    • Slots on bottom of carrier contain strap ends to eliminate flapping
    • Pads on straps protect board rails and provide extra grip
  • Integrated rollers let you easily load an oversized board
  • Tie-down straps and stainless steel hook secure tail of board to your vehicle
    • Secure bottom board if 2 boards are mounted
  • UV-resistant, synthetic rubber strips on arms protect your board from scratches
  • Simple, clamp-on installation on most crossbars - no tools required
    • Adapters included to keep carrier from sliding on round bars
  • Same Key System (SKS) locks secure boards to the carrier and the carrier to your vehicle
  • Lightweight extruded aluminum with glossy black powder coat finish resists corrosion


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
    • Maximum crossbar dimensions: 3-1/2" x 1-11/16"
    • Minimum crossbar spread: 24"
  • Carrying capacity: 2 boards
  • Weight capacity: 66 lbs
  • Maximum stand-up paddleboard width: 36"
  • Integrated strap length: 62-1/2"
  • Carrier width: 40-1/8"
  • Tie-down length: 11' 10"
  • Limited lifetime warranty


Yakima SUP Dawg Crossbars

The SUPDawg lets you carry 1 or 2 SUPs fin side up on your vehicle's roof rack. This padded aluminum carrier includes integrated, adjustable straps, rollers for easy board loading, and a tail tie-down to secure your boards. The SUPDawg mounts to most crossbars without tools, and it includes locks to secure your boards to the carrier and the carrier to your vehicle.


Built-In Straps and Tie-Down Anchor

The carrier has integrated straps that adjust along built-in tracks to snugly secure your boards. The straps can be tightened or loosened by pressing the red buttons on the end of each arm.


Elastomer pads on the straps help grip your boards, and they protect your board rails against strap abrasions. The polypropylene straps and UV-resistant pads will last through many years. And built-in slots in the carrier contain excess strap length to prevent flapping as you drive.


Yakima SUP Dawg Tie Down

The included tie-down strap acts as an anchor - securing your SUP to your vehicle. The strap connects to a tie-down point on the tail of your board and hooks onto your bumper. If you are carrying 2 boards, secure the strap to the bottom board. A cam buckle lets you adjust the tension, so you can secure your board without damaging it. A flexible elastomer sleeve along the tie-down strap also protects your bumper from abrasions.


Easy Loading with Integrated Rollers

Yakima SUP Dawg Roller

Rollers are built into the ends of the carrier to help load large, heavy boards. Just set your board on the edge of the carrier, and push the board onto your roof.


Simple, Clamp-On Installation

Yakima SUP Dawg Clamp

The SUPDawg's mounting clamps fit most crossbar configurations without the adapters. To install, simply place the carrier on your crossbars and turn the integrated handles until the mounting clamps are tightly secured. If you have round crossbars, the included adapters will provide a secure fit, preventing the cradles from twisting or sliding on the bars.


Added Security

Yakima SUP Dawg SKS Lock

Locks on the ends of the carrier secure your board to the carrier and the carrier to your roof rack. After your board is loaded and the straps are pulled through to the back of the carrier, use the locks to secure it in place. Yakima's SKS cores can be swapped out to make all your Yakima locks keyed alike.



8004075 Yakima Sup Dog Roof-Mounted Stand Up Paddle Board Carrier

Installation Details Y04075 Installation instructions


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

32 reviews
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.

by:

Got the racks so I didn't have to put my 9 foot soft-top board inside the vehicle. Inside the board restricted my ability to see the passenger side of the vehicle. A safety issue.
The racks came assembled and were straightforward to attach to the crossbars. the SUPDawg held the board securely.
I am pleased with the purchase & feel much better about getting the board to the beach.
Michael



by:

After doing some research decided to go with the Yakima roof rack setup for our VW Atlas. Love the look and functionality of it all. Got the SUPDawg paddle board carrier to go with it. Love the locking capability for piece of mind when leaving boards unattended. We are VERY happy with our choice. Drove on highway with two paddle boards and it all went smoothly with zero wind noise whatsoever. Definitely worth every penny. Will recommend.



by:

Received the the Thule accessories and Yakima Supdog from etrailer.com. It was all nicely packed into one box. As the box said, "the bottom of this box should not be the end of the relationship"
I can tell you it won't be! The items were shipped quickly, and they followed up with an email to make sure all was received well. Love the customer service! Also, the Yakima Supdog product is great. Took no time at all to get it on my truck and load up the 2 paddleboards.
It was exactly what I was looking to get!
Thanks!



by:

The SUPDwag is easy to install and use. Made for Stand Up Paddle boards, but it can work with Surfboards. Wish it was a little bit narrower, hopefully Yakima will make smaller one for the surfing market.

I turned my unit around to the driver's side for loading, also protects rain from getting in the lock when driving.



by:

Great Product, mounts very well and sturdy to my stock VW carrier bars. Easy to install and easy to use. I would give this 5 stars if the length of the straps had been in the description. If the straps were 75" instead of 65" this would allow for more carry options. If you have 2 sups over 6" thick and 33" wide, I would search for another option. Many hybrid SUPs like ours are over 6" thick and very wide and unfortunately this carrier cannot accommodate 2 of our hybrids due to strap length.



by:

I use these 2-3 time weekly for my SUP I fish off my SUP and this rack is a great investment for quickness and ease of strapping. Thing I like best about etrailer is how fast I get my stuff.



by:

Put these on a Subaru Forrester. Very easy. Love the excess cord storage. Snugged down my paddleboard so well I didn't need the front tie down.

Dawn G. profile picture

Dawn G.

9/5/2017

Love it.



by:

Competitive price. Works as expected for a year now, no problems and very easy to use. I was surprised etrailer had these in stock while everyone else was out or drastically up charging.



by:

When purchased I was concerned that the clamp down to my cross bars wouldn't work. Upon delivery I installed the SUBDawg immediately with no problems what so ever, the universal type clamp worked well. My wife and I put both paddle boards on after the install and went for a ride up to 70 mph, we felt no movement. The engineering of the tie down is awesome. I highly recommend buying the Yakima SUBDawg.



by:

Great product! Customer service is A+ I will definitely buying from etrailer again. Thank you



by:

Fast shipping. Good price. Nice product. Easy fit and install



by:

I love etrailer they also have great people help you out when you have questions.



by:

Fantastic service! Speedy delivery and The sales team follows up with you to make sure you have all the information you need to use what you ordered. Fantastic company. Would highly recommend and I will use them again in the future



by:

Great product. It works very well with two paddle boards. We can’t wait to use it as much as possible this summer up at Lake Tahoe.



by:

Mark profile picture

Mark

5/19/2022

Still works great after a year, easy to load and durable.



by:

holds board firmly in place.



by:

Great product. Easy to install.



by:

Great communication!



by:

Delivered as promised.



by:



by:



by:



by:



by:



by:


25
32
Show More Reviews

See what our Experts say about this Yakima Watersport Carriers

  • Will the Yakima SUPDawg Stand-Up Paddleboard Carrier Work w/ Yakima HD Crossbars?
    They sure will Matt! The Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs item # Y04075 has a universal clamp on system that is compatible with crossbars up to 3-1/2" wide x 1-11/16" tall. Yakima HD Crossbars like the ones on item # Y01151-5855 measure 3" wide x 1-1/2" tall so you'll be good to go! The Yakima SUPDawg item # Y04075 has a 66 lbs and measures 40-1/8" wide. You'll want to make sure you have your ladder rack uprights spread at least 24" apart. What kind of paddleboards...
    view full answer...
  • Recommended Thule SUP Taxi Carrier For 2017 Honda CRV With Factory Roof Rack
    The Thule SUP Taxi Stand-Up Paddleboard Carrier - Roof Mount - 2 Boards # TH810001 will work on your 2017 Honda CR-V as long as the crossbars are no bigger than 3-1/2 inches by 1-3/4 inches and have a crossbar spread center to center of at least 24 inches. This carrier will carry 2 SUPs fin side up on your crossbars as long as the weight of the 2 boards doesn't exceed 55 lbs..
    view full answer...
  • Recommended Stand Up Paddleboard Rack for TracRac Ladder Rack Compatibility
    The Thule SUP Taxi XT Stand-Up Paddleboard Carrier # TH810001 does have straps that when fully extended will fit around the TracRac Crossbars. I can't confirm this to be true for the Yakima SUPDawg # Y04075 on the wide TracRac crossbars because of their size. If you want the cleaner look, I instead recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445 or the Lockrack Watersport Carrier # LR54FR. These options will mount to the channels...
    view full answer...
  • Will 70 Inch Yakima JetStream Crossbar Allow SUPDawn & Sky Box 16 to Fit Together
    Hi CM, So in order to fit both the Yakima SkyBox 16 # Y95AV and Yakima SUPDawg # Y04075 next to each other on crossbars, you're going to need the 70 inch long Yakima JetStream Crossbars # Y00427. Even positioned at the outermost edges of the 60 inch long bars there won't be enough space, so you'll need the 70 inch bars and there is still going to be some overhang off the side due to the widths of the cargo box and carrier.
    view full answer...
  • Do Yakima Accessories Fit the Thule TracRac TracONE Ladder Rack on a 2012 Toyota Tacoma?
    Yes, they will Harry. The Thule TracRac TracONE Ladder Rack item # TH27000XTB-TA is compatible with Yakima surf racks like their SUPDawg item # Y04075. This ladder rack is compatible with both the 5' and 6' bed lengths of the 2012 Toyota Tacoma. The crossbars measure 65" long x 4" wide x 1-1/2" tall. Please note that the Thule item # TH27000XTB-TA ladder rack is not compatible with tonneau covers of any style. Which specific Yakima accessories are you looking at? You can add this information...
    view full answer...
  • Recommended Roof Rack for a 2016 Mini Countryman w/ Flush Mounted Rails
    Hey Qim! It looks like the Park Lane edition of the 2016 Mini Countryman came with flush mount rails installed on the roof. If this is correct, I recommend the Inno Aero Flush Roof Rack for Flush Rails item # IN82RV. This flush mounted roof rack does not extend past the side rails so it is perfect for a non-inflatable SUP. The bars are 36" wide and have a 165 lbs capacity. If you're in need of a carrier the Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs item # Y04075 would...
    view full answer...
  • Recommended SUP Carrier To Go On A TruXedo Elevate Rack System TX24NV
    'Sup Kevin (see what I did there?). I do have a solution for you, but the Thule SUP Taxi # TH810001 and the Yakima SUPDawg # Y04075 are not going to work with the TruXedo Elevate Rack System # TX24NV. The TruXedo system has crossbars that are 3.79" wide 1.5" tall. The SUP Taxi and SUPDawg will only work with upto crossbars 3.5" wide. So, the TruXedo bars will be a hair too wide. We do have some good SUP carriers that will work on the TruXedo crossbars. One really good option is the Lockrack...
    view full answer...
  • Recommended Stand Up Paddle Board or SUP Carrier for T-Slot Mounting
    The Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards # Y04075 is not able to be mounted to the top of rails with t-slots. However, we do have an option that will fit your desires. I recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445. This carrier will fit the T-slots of your crossbars, headache rack, or ladder rack. It comes with the locks included. I've attached a video to assist.
    view full answer...
  • Best Lift Assist Carrier for Stand-Up Paddle Board
    We do have a great option for you, though the Thule Hullavator Pro # TH898 would not work with a paddle board because it would not be tall enough. The J-style of the Hullavator's cradles has tie-downs on top and a SUP does not have the height for it to be secured. Instead, the best lift assist for your SUP is the Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 because it actually comes with saddles for your paddle board, as you can see by the cut out of the...
    view full answer...
    Image 1 for
  • Canoe, Kayak, and Paddleboard Carrier Recommendation for Yakima Rack and Roll
    Paddleboards are too thin to carry vertically with a Yakima JawLow part # Y04073 and have them be secured as safely as they'd need to be. You really will need a rack for each item on your Rack and Roll # Y08107. The etrailer J-Style Carrier part # e98878 would be great for the kayak, then for the canoe the KeelOver part # Y04069, and finally for the paddleboard you'd want the SUPDawg part # Y04075.
    view full answer...
  • Will Yakima SUPDawg Fit Sherpa Crestone Crossbars
    Yes, the Yakima SUPDawg part # Y04075 will fit a 2 inch by 1 inch rectangular crossbar as it can fit bars that are up to 3-1/2 inches wide and 1-11/16 inches tall.
    view full answer...
  • Will Yakima SupDawg fit on Yakima Overhaul Crossbars
    The Yakima SupDawg part # Y04075 that you referenced can fit the crossbars of the Yakima OverHaul part # Y01151 but it would do so by clamping around the bar. If you wanted carriers that install via the top channel of the bars I instead recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445 or the Lockrack Watersport Carrier # LR54FR.
    view full answer...
  • Should Kayak Carrier be Used to Carry SUP Paddleboards
    Kayak carriers really aren't ideal for carrying paddleboards since they are designed for securing something taller or "thicker" I am sure there's a way you could secure one to a Jaylow part # Y04073 but that's not something we'd be able to give you definite instructions on and you'd be doing so at your own risk so we'd not recommend it. Your best options would be a carrier designed for paddleboards like the Yakima SUPDawg Carrier part # Y04075 which can carry both of your SUPs on the one...
    view full answer...
  • Best SUP Carrier For Easy and Quick Loading
    It really depends on the carrier you go for. For the Thule Taxi XT # TH810001 I recommend putting a tie down in the front. Just because there is only one narrow strap securing your paddle board to the carrier and when you're driving at high speeds the paddle board will catch quite a bit of air which will raise the front of the board. I suggest the same thing for a Yakima Rack like the SUPDawg # Y04075. Same idea here, highway speeds will raise up the front end so again I recommend using...
    view full answer...
    Image 1 for
  • How To Carry 2 Kayak And A SUP On A 2021 Toyota RAV4
    I can get that rack setup for you. I recommend a Yakima offering. It will consist of the following; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Landing Pad 23 for Yakima SkyLine and Control Towers - Qty 4, part # Y98FR, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has t-channel, so it can work with all channel...
    view full answer...
  • Rooftop Carriers for SUP and Skis
    Yakima's SUPDawg Stand-Up Paddleboard Carrier # Y04075 does resemble a rooftop ski carrier but it is designed specifically for use with SUPs which can be 4 to 5-inches thick, a good bit thicker than many skis are when stacked together. Ski carriers like the Rhino-Rack # RR576 can be used with skis or with snowboards (or even fishing poles) but they will not be able to fit a much thicker item like a SUP. What might work for you is a cost-effective combination of a ski carrier, such as the...
    view full answer...
  • What Is Crossbar Distance Needed For Roof Rack Paddleboard Carriers
    There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part # TH811XT and # Y04075. Both carriers have weight capacities and crossbar dimensions, so you want to make sure you select the right carrier that will work for you. If you want to let me know what roof rack system you are using I will be glad to make recommendations that will work.
    view full answer...
  • Does Yakima SUPDawg Have Strap That Locks Into Foot?
    The Yakima SUPDawg # Y04075 you were looking at does indeed lock the strap into the foot, and locks the foot to the crossbar on your vehicle. I don't think you can go wrong with either one, as to be honest they are very similar in design and quality. I have more experience with Yakima as brand and am positive you'll be perfectly happy with it!
    view full answer...
  • Roof Rack Recommendation for Carrying SUPs on a 2022 Toyota 4Runner
    I recommend using the Yakima JetStream setup to carry your paddleboards on your 2022 Toyota 4Runner because the Yakima legs have adjustments in them that allow you to get the best fit possible. 60" JetStream Crossbars - Black # Y00426 TimberLine Towers - # Y33TR Lock Cores - # Y07204 (optional) Then if you don't already have a paddleboard carry I recommend going with the Yakima SUPDawg # Y04075 which can carry both of your boards. If you wanted to have matching locks for the roof rack...
    view full answer...
  • Can the Yakima SUPDawg Stand-Up Paddleboard Carrier Hold a Paddle Board and Surf Board
    The Yakima SUPDawg Stand-Up Paddleboard Carrier, # Y04075, can handle 2 boards of different sizes so you should not have a problem putting a paddle board and a surf board on the carrier together. I have included a link to a video review of the carrier for you.
    view full answer...
  • Will Straps of Yakima SUPDawg # Y04075 Come Loose
    We've sold quite a few Yakima SUPDawg Carriers part # Y04075 and none of our customers have come back and reported that the straps loosened. Basically every review was very positive and mentioned that it worked really well so I would highly recommend this carrier.
    view full answer...
  • Is Yakima SUPDawg Stand Up Paddleboard Carrier Compatible w/ Thule Xsporter Truck Bed Ladder Rack
    According to Thule, the crossbars used on their TH500XT Xsporter ladder rack measure 3-1/2 inches wide by 1-1/4 inches tall. The Yakima SUPDawg # Y04075 stand up paddleboard carrier is compatible with a crossbar of that size, it fits crossbars up to 3-1/2 inches wide and 1-11/16 tall.
    view full answer...
  • How to Carry a Kayak and Two Paddleboards on a Yakima Rack and Roll Trailer
    Your Native Ultimate 12 kayak would work great on the Yakima Rack and Roll Trailer # Y08106 that has 66 inch wide crossbars. The Thule DockGrip part # TH895 would work best on a kayak of your size and then for paddleboard carriers the # Y04075 which can carry up to 2 at a time would work great and would allow you to fit everything on the trailer.
    view full answer...
  • Antenna Clearance When Transporting Stand-Up Paddleboards on 2013 Ford Escape or 2013 Toyota RAV4
    When it comes to a stand-up paddle board carrier that will clear the antenna on a 2013 Ford Escape or a 2013 Toyota RAV4, I recommend taking a look at the Thule SUPDawg, part # Y04075. We installed this carrier on a Toyota 4Runner and as you can see in the attached picture, there is quite a bit of room between the roof and the paddle board so you shouldn't have any problem with antenna clearance.
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Watersport Carrier?


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Updated by:
Daron K
Employee Michael B
Updated by:
Michael B
Employee Manda E
Updated by:
Manda E
Employee Ashley K
Updated by:
Ashley K
Employee Lisa S
Written by:
Lisa S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<