What Is Crossbar Distance Needed For Roof Rack Paddleboard Carriers

Question

Question:

I carry a 11 foot paddleboard on my rack. what is the preferred distance between the two cross bars?

asked by: Robert

0

Expert Reply:

There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches.

This is the minimum distance needed for part # TH811XT and # Y04075. Both carriers have weight capacities and crossbar dimensions, so you want to make sure you select the right carrier that will work for you. If you want to let me know what roof rack system you are using I will be glad to make recommendations that will work.

expert reply by: Jeffrey L

0

Answer 1

The crossbar spread will vary depending on the accessory you want to put on the roof rack. The Yakima FrontLoader Wheel Mount Bike Carrier, part #Y02103 will work with a crossbar spread between 16 and 48 inches, so you can see it will work with most…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Hey Dellos, the Blue Ox base plate and tow bars are in my opinion the easiest to use and are also very well made so I would recommend the Blue Ox part #BX1139 with the tow bar part #BX7420. Then for lighting the Curt kit part #C96JR is a very simple…

view full answer...

Answer 6

It looks like you're already in great shape because you have the three major components needed for flat towing: the etrailer Invisible Base Plate Kit part #e98948, the Blue Ox Patriot Portable Flat Tow Brake System part #BLU37TR, and the Blue Ox…

view full answer...

Answer 7

Hey Kevin, welcome back! You are correct, since you have ParkSense on your 2026 Rubicon the #RM-152 is not the correct wiring kit. What you need instead is the Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights #RM47ZR. This will get…

view full answer...

Answer 8

Hey Jim. The Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR is indeed compatible with the LED lights on your 2025 Jeep Wrangler Unlimited. It plugs into your factory wiring harness behind the tail lights. The only issue would be if…

view full answer...

Answer 9

Hey Michael, I went down to the warehouse to get the measurements. The cable drums on that M-3 #M386FR spring system are 4 inches in diameter and 2 3/8 inches in width. The exact width isn’t specified because they’re designed to slide and adjust on…

view full answer...

Answer 10

Hey Jimmy, My go-to hitch recommendation is the etrailer Trailer Hitch Receiver #e98856 because it has a matte black finish which will keep the hitch in better shape longer than the classic glossy black finish we see with the other hitch fits. The…

view full answer...

What Is Crossbar Distance Needed For Roof Rack Paddleboard Carriers

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching