Most Popular With Rectangle Foot for Ram 1500

I have a Jeep Wrangler and the back door would not open because the neck of the jack that came with the trailer was too tall. This neck - when lowered all the way, does not impeed the door from opening. I talk with a rep before ordering. She was very helpful and got me the correct product.

I love this so far. So nice to be able to adjust it out and pull it out to get the tailgate down.

Works great even better than original. Wished I replaced it years ago ago!

7000 lb trailer jack with grease fitting is smoother than I expected. Great Value. Easy on line order and great shipping. Thanks for the attention to my order

I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver.

This jack is perfect. It fits my trailer well, seems well built, and was easy to install. Some of the other jacks I looked at locally seemed like they were mounted loosely and would rattle around. This one is tight against the trailer and doesn't rattle while driving.

Easy to install. Rugged and easily adjustable. Second trailer I’ve used this jack.

Excellent delivery time! Very quick and easy installation. The jack feels well made the cranking is smooth. Highly recommend this jack.

Jack works great. Damaged the original when I forgot to lift the foot and hit my concrete parking apron. After I straighten out the mount this jack fit the hole perfectly and works great.

Instillation was very easy and it works amazingly. My trailer had a electric jack before and I was always having to maintain a battery, now I don't he to mess with that and it lifts super easy. I highly recommend this jack for enclosed trailers or heavy tongue weighted trailers.

Package arrived a day early. Jacks were just as I expected and best price I found. Can’t wait to get them welded on. Will be buying more jacks in the future. Best selection I’ve found as well.

Purchased to stabilize my recently obtained trailer for hauling my tractor. The jacks add a great deal of security and safety to the operation by allowing me to block the downward movement of the rear of the trailer while driving the tractor onto it, then being able to remove them once loaded for transport.

If etrailer didn't have such a detailed website, I may have shopped somewhere else. But it was because they have a section where you can ask questions and get detailed answers that I decided to buy the Pro Series jack above. My ATV trailer jack is 2-1/4 " square at the top and welded to the frame. The large nut inside that moves the jack up and down had stripped. Couldn't find another nut anywhere - not locally or on the internet, nor would a machine shop make one for less than $200! Only options were to cut the old jack free and weld on a new one - or - scab parts from a new one and hope they would fit. I took a chance on the latter. Michael Howell really went out of his way to disassemble another of these jacks and measure the o.d. of the main screw inside for me. It was exactly what I needed! The jack came on time and was immediately placed on the operating table. Had a devil of a time punching the pin from the side gear, but after that, and a little grinding on the screw top, I fitted the lower half of the new jack to the gears and handle of the old one. Chock another one up for good old American inginuity and elbow grease! $77 and 2 hours later I had a brand new bouncing baby jack. No cutting, No welding, No Problem!! Pictures of finished jack included. Thanks guys! This saved me well over $100, and now I can go 4-wheeling again!

Ordered two on Thursday at 7:30 pm and they arrived Monday before noon to central MN. The box was a little beat up but neither were damaged. Very well built product and very smooth cranking. Mounted on the back corners of a 3000 lb. fishhouse that was a travel trailer. We had to replace the bumper as it rusted out and the existing jacks only had a 7" lift with no drop leg. Now we won't have to jack and block, jack and block. The free shipping was the deal maker as they weigh 22 lb.s each. I would recommend this product.

Worked perfectly for supporting the rear of the trailer for loading my tractor Mounted one on each side on rear of trailer

Good inexpensive jack. I ordered two. My use for them is somewhat "off label". My 19" 9000# capacity flatbed trailer has a label on the dovetail indicating that the rear of the trailer should be supported for any loads over #3000. Personally I think supporting the rear for a trailer is always a good idea when loading and unloading. It puts less strain on the rear of the trailer and it prevents the trailer from lifting the rear of the tow vehicle during loading which can be extremely dangerous. I had a friend weld the tube mounts on each side of the rear of the trailer. See pictures below. Now I don't need cribbing or chunks of wood to shove under the rear of the trailer. These will also adapt well to uneven ground. They can be stowed horizontally, like in the picture or removed when not needed.

Great jack fit a worked as advertised. Service and shipping was fast

Bought the jack for a very heavy no till grain drill. Jack was well built and handled the tongue weight fine

Excellent purchase. It was a 10,000 pound jack and I purchased one that was re-boxed and it came with one small scratch on it, but it did not affect its performance at all. Very pleased.

We've installed these on several trailers for out autorestoration and custom welding shop in detroitlakes mn, we also build bumper jacks and other lifting equiptment out of these. Etrailer sells them at the best price ,and packaging/shipping was impressive too. Even beaten half to death, scratched, dented, left in the weather, mud and rust, these things still work effortlessly, theyre the only way to go and easy to hook to hyraulic, chain, motor or cable drives for hands free operations !

The jack on my cattle trailer wore out. I ordered a replacement from etrailer and within a couple of days the new jack was delivered. My son, a welder, cut the old jack off and installed the new jack. The new jack is so superior to the old one. The ability to turn the jack parallel and out of the way is great. I am sending before and after photos. Thanks for the great service and product!

The action is smooth and the construction sturdy. A+

Have used this on a flatbed for over a year. Has worked flawlessly and recommend this jack. If the weight rating matches your needs, this is an excellent product for the price point.

The jack lasted about 5 months on a tool trailer that is moved from jobsite to jobsite. It was used about twice a week during that period. We oil and grease all of our jacks that are like this one, so they last longer. I would definitely not buy this brand again.

Good price, exactly what I needed. Order fulfillment times can't be beat.

Great product at a great price. Used the chat and and got great help quickly.

It works great. I am using it as a belt tensioner on our 1898 30 foot Pelton wheel at the North Star Museum. Probably not a use the manufacturer intended.

Im starting to wonder about shipping

The Fulton trailer jack has held up very well. No signs of rust and the crank works perfect.

This product has proven durable and easy to use. Installation with simple and straight forward. If you're looking for a robustly built, long lasting Jack for your boat this would be THE product you're looking for. We previously purchased other jacks that did not last, became hard to crank, and ultimately failed. I'm glad I purchased this.

Original jacks arrived damaged by shipper in transit. etrailer sent replacements right away and a prepaid label to return damaged products. Replacements arrived shortly afterwards, thank you. Jacks themselves are well made, sturdy and easy to use. Swing away feature also allows jack to be physically removed from trailer and stored elsewhere, an especially important feature as the jack could otherwise be easily removed and stolen if left on trailer tongue. Pictures of project to follow.

I have used the Jack several times and works excellent. Well built. I leave it off the trailer and will use it on other trailers which have pipe mounts, as the trailer I bought it for is used infrequently. All the people that work at etrailer were very helpful in getting the right jack for my needs. I will be rebuilding another bulldog jack and will order parts when I determine what is required to repair it.

After about 2,000 miles, maybe 30 times disconnecting the trailer, a part in the crank fell out, I believe it was a pin. But it fell out inside the cover and I put it back in and the crank worked again. It hasn't failed yet, even tho I know it's just a temp. fix. I wish the handle stowed, it just dangles when in the up position, but it's never hit the ground that I know of. And it was a pain to find someone to weld it on. But I would still buy this product again and would recommend it to a friend.

For the last 20 years I've had a small utility trailer that I've been picking up, moving around and dropping on the hitch ball. At 66 years old I decided it was time to save my back and I bought The Pro Series Round , Snap-Ring Swival Jack- (weld on) w/ 10" lift - 2,000lbs. With 2 hours I had the jack weled on my trailer. WOW - wish I did this years ago. The jack cranks very smooth and lifts and drops down Iike a dream!!

Makes life so much easier than lifting the front of the trailer all the time.

Perfect. Needed a jack for my off road utility trailer which is only 2” square. Just what the doctor ordered. Super fast shipping. Awesome customer service. Thanks.