Bulldog Square Swivel Jack w/ Round Pipe Mount - Fixed Leg - Sidewind - 15" Lift - 5,000 lbs

Video Transcript for Feature Review Bulldog Square Swivel Jack w/ Round Pipe Mount

Today, we'll be reviewing part number BD190756. This is the Bulldog Square Swivel Jack with a round pipe mount. It does have a fixed leg with a side wind handle. It's going to provide 15 inches of lift, and it's rated at 8000 pounds. This does have a superior side load capacity when compared to round jacks. The outer and inner tube overlap for additional strength when the jack is fully extended, and the square design also provides additional support for side loading. It does have a compact design, which makes this perfect for tight applications. The tubular swivel design here on the side is going to let you swing the jack up for travel or down for use.

It does have the included pull pin that's going to hold the jack in place, and that's our standard 5/8-inch pull pin. It has a nice chain that's going to keep the pull pin attached to the jack. That way, we don't have to worry about misplacing it or losing it. The round tubular mount is included, and that's going to weld to your trailer, and you can see how that spins freely around our jack, which means that our jack spins freely inside the mount, which is going to allow it to move to a stowed position or to an upright position to support our trailer. This has a durable long-lasting construction with a weather-resistant coating on the outer tube and a zinc-plated finish on the inner tube, which is going to help it stand up against rust and corrosion. Here on top, we have a screw nut stop that's going to prevent damage to the screw and/or nut when the jack is fully extended. The side wind handle has a smooth ergonomic design for easy cranking, and it's going to have a handle radius of about 8-1/2 inches. The round swivel mount has an internal diameter of about 2-1/2 inches, and our footplate is included, and it's going to measure 8 inches by 6 inches.

This jack is also ASABE compliant. When it's fully retracted, we're going to have a measurement of 12-3/16 inches from the center of the weld mount to the bottom of the footplate. When it's fully extended, that measurement is going to increase to 27-3/16 inches, and when we subtract those 2 measurements, we're left with 15 inches, and that's where we get our lift measurement from. Now, you want to be sure that you mount this in a location where your jack is not going to interfere with other parts of your trailer, whether it's in an upright position or a stowed position, so the clearance from the middle of the weld bracket to the top of our jack is going to only measure 12-3/8 inches. This has an outer tubing width of 2-1/2 inches with an inner tubing width of 2-1/4 inches. It provides a lift capacity of 5000 pounds with a static capacity of 8000 pounds. That's going to complete today's review of part number BD190756.

That's the Bulldog Square Swivel Jack with a round pipe mount. .