With corrosion-resistant zinc plating and a 6-1/2" retracted height, this drop leg jack is perfect for marine and other recreational applications. Offers 14" of screw travel and 14" of drop leg extension.
Features:
Specs:
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (200 Customer Reviews)
With corrosion-resistant zinc plating and a 6-1/2" retracted height, this drop leg jack is perfect for marine and other recreational applications. Offers 14" of screw travel and 14" of drop leg extension.Very good quality. Easy to install
Mark - 11/03/2021
This product has proven durable and easy to use. Installation with simple and straight forward. If you're looking for a robustly built, long lasting Jack for your boat this would be THE product you're looking for. We previously purchased other jacks that did not last, became hard to crank, and ultimately failed. I'm glad I purchased this.
Dave - 08/24/2017Came with everything you would need including multiple bracket sizes. Very happy with this product, service etc.
Very heavy duty jack!!! Replaced a topwind a-frame jack with this one so I wouldn’t have to worry about any dents in my tailgate. I mounted in-wards so you can still raise/lower the Jack from the drivers side. etrailer got this to me in 2 days, great company!!!
The. Box came damaged and parts were mi ssing
Sierra K - 09/28/2021Very good trailer jack
After going through three trailer jacks in almost as many years, I tried this Fulton jack. It has been great! Solid, dependable, works like a champ every time. I highly recommend it.
Jean M - 07/20/2020There is nothing wrong with the jack itself. Very easy to lift the trailer tong and really smooth compare to old jack. I would give it 5 stars. However I could not mount it because U-bolts provided are about 1/2" short. And it is OK too, things happen. The problem is there is no any information whatsoever about mounting dimensions or bolt sizes and specifications. For that matter installation instructions enclosed are for the different type of jack.See attached photos. Now I have to play guessing games is it 7/16" diameter or else? Is it 4" or 4 1/16" wide, what kind of thread? In other words instead of what would be a simple procedure for tightening 4 nuts I need to spend time and more money to finish installation. In fact back in April I asked these questions and never got any clear and Intelligence answer from etrailer "experts". Why is it difficult to provide this information?
The product is exactly what I needed for my trailer. Also, the service/communication with etrailer was excellent. I emailed about the shipping state and got numerous emails back with that information plus much more. This was a GREAT experience.
The Fulton Marine Jack, part HD50000101, comes with three sets of U-bolts to fit different trailer frame sizes. Obviously it is not an exact replacement, the difference in weight capacity, but it will fit a 3x4 inch trailer frame. The U-bolts are designed to fit, 4, 5 and 6 inch tall frames, so you will need the smallest set.
-- Patrick B - 9/3/2013 Preston S - 02/20/2015Top notch trailer jack. Easy to use. It replaced a welded on trailer jack on our 16' trailer that we use to haul drums of maple syrup to market.
Tom - 04/20/2019I bought this jack last year to supplement my jack with the wheel on it. To get my boat in the garage I have to use a 3 inch drop and since the driveway slopes downward I only have about 8 inches of clearance to the ground. This jack lets me get the boat all the way in the garage AND can still get the trailer on and off the hitch.
well made quality product. Fast shippin g.
This jack is heavy duty and was easy to install. I have a saltwater boat that we trailer to and from the bay each time we go fishing and the salt is tough on gear. So far the unit has lasted a full year without significant rust accumulation or malfunction. 2 years seems to be the typical life of most components, however, so next year will be the test.
this jack is heavy duty and has a good outside coating that should last for years. I have it mounted on a trailer with the top of the draw bar around 19" off the ground . If the trailer has a low draw bar you may need to mount this higher for ground clearance. Great product ,very strong , easy to crank up loaded and the quick drop foot is much faster then cranking .
Excellent product! Installation was a breeze, and it looks and works like a charm.
Quality product. Built extremely solid, excellent welds, smooth crank, mounting plate holes are deberred, in fact I could not find a burr anywhere. I purchased 2 of these for a project and found they have great adjustability. The mounting "U" bolts supplied are for 3 different size trailer tongues and are 1/2" dia. These lifts certainly appear to be able to handle their 5000# rating. Etrailer shipped the order the next day. The product was well protected, Three layers of cardboard. The order arrived in excellent condition.
This is the second time I have bought this. The first time was for my 20’ snow mobile trailer. It has performed flawlessly for the last 4 years. So it was time to buy a new jack for my boat trailer. 20’ Mako center console. It’s an over kill, but it is rock solid and know problem lifting the hitch Up to get on a lifted Ram 1500 Highly recommend
very rugged. works great
I received the package this afternoon and installed it on my boat trailer. I have a heavy aluminum river boat with some t-1 plate on the bottom. I needed a jack stand that was stable when the boat is on the trailer. This product works well and I will be recommending it to my fellow guides here on the Salmon River here in Idaho.
This is a heavily built Jak stand.
I call etrailer At 800-298-8924 & got my order taken by a real Person that was Customer Friendly. I received My order in a timely manner also. I would recommend any One looking for (TOWING, SPORTS & REC, TRAILER ,VEHICLE , RV&CAMPER & DEALS !!!) They have all kind of Brands to choose from. It was a replacement Jack on a scissor lift trailer. it is a excellent product. It also was a excellent Price. When I need something else etrailer will be the first place I look for it. Thanks Bill Excellent Job.
I had to replace my trailer Jack due to rust after only 3 yrs. Found this one and can say its heavy duty and perfect for my needs. I have a 9000lb boat and it is easy to raise and lower. Let's hope it holds up to the salt air conditions. I recommend this Jack for sure.
This jack is awesome. I have a large equipment trailer. Super easy to install and works great. The rapid shipping and personal follow up were a welcomed surprise. I will always consider etrailer for my future needs. Great customer service.
David M - 10/21/2018Great , nice and strong not cheap!
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.