# 1
Blue Ox Avail Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs
Heavier than our last Aluminum blue ox but it appears to be just as sturdy. Only used it once to tow jeep about 25 miles but down a tight canyon road. Didn’t notice any unusual characteristics in the short trip while in tow.
# 2
Roadmaster Sterling All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 8,000 lbs
Arrived quickly and well packaged. Took less than an hour to install on the RV with the included safety cables and wiring.I haven't pulled our Bronco with it yet but the tow bar appears to be well built and a quality product.
First, received the package and upon opening, found that the linch pins were missing. One phone call and issue was resolved and replacement items were being expedited to me. Appears the box came open on one end during shipment and parts came out before carrier retaped the tear. Good on E-Trailer for outstanding and prompt customer service! Now, the Sterling All Terrain towbar - very impressive unit as I had bought this on reputation only as no dealers had any in stock (they say it is too costly to carry in store). Very well made, excellent finish and welds. Instructions are quite clear and easy to follow. I like that when you purchase this unit, it is a “total package”. There is nothing I could see that is cheaply made - all quality. This was my first purchase from E-trailer, and based on how this order went start to finish, and having to deal with missing parts on an order - I am very pleased and will deal with them in the future.
# 3
Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs
Over the last 30 days I have purchased multiple items totaling in excess of $3000. I have continued to come back to trailer because they have everything a person with a motorhome needs for towing a vehicle. More importantly there videos and technical expertise online is instrumental to the success of installing your product instead of paying astronomical fees for someone else to do. I will always use etrailer and recommend this company to people I know And meet.
# 4
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
This tow bar is a beast! I'm replacing my existing one (same model) after over 20,000 miles of pulling a Jeep Cherokee behind a class A motorhome. It has taken a beating on a trip to Alaska and back to Texas, including an incident where the wind blew me off the road and put the Jeep on 2 wheels. A frost heave that bent the RV Tow receiver but not the tow bar. As well as a car driving into the back of the Jeep while I was towing at 65 mph. Can't say enough about the quality and durability of this product!
Excellent product. Towing 4 door Jeep Wrangler Sport.
# 5
Roadmaster StowMaster Tow Bar - Coupler Style for 2" Ball - Car Mount - 6,000 lbs
I have owned a 5k rated, this seems to be twice as heavy and much better quality.
The product quality is excellent and very easy to use. We've had no issues with the installation or towing our F150 behind our motorhome. Easy to remove or attach with just one person.
# 6
Roadmaster Nighthawk All-Terrain Tow Bar for Blue Ox Base Plate - Non-Binding - LEDs - RV Mount - 8K
We've been towing our Jeep Grand Cherokee for about 8 months now with this tow bar and it's worked flawlessly! We've been places where the coach and Jeep are not perfectly aligned putting the attaching pins in a bind, but with a simple release of the handle it would release the arm and unbind the pin. Super easy to use. I highly recommend the Nighthawk All Terrain, Non-Binding tow bar. OH! The LED lights along the arm make it look great too!!
# 7
Roadmaster StowMaster Tow Bar - 3" Lunette Ring - Car Mount - 6,000 lbs
Having used Roadmaster products for years imagine my surprise when after using my new hitch for only a month the right arm came apart while towing my car. I happened to be looking at it and was able to coast to a stop during a slight uphill grade which prevented my car from any further damage. As it turned out the bolts which hold the arms on had fallen out. Why I don’t know. I was able to use a temporary pin in the slot which allowed me to get to a hardware store where I replaced ALL the bolts holding both arms with grade 8 bolts and nylon locking nuts. The arm slid on the road, ground down a small corner and scuffed the paint but did not compromise the integrity of the hitch. The design works flawlessly even if the quality control could use some closer monitoring. All in all it’s still a great product. As you can see from the photos I doubled up the nylon locking nuts and have had no problems since.
Very satisfied with my etrailer experience William was very professional and knowledgeable I will definitely be a return customer
# 8
Blue Ox Alpha 2 Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,500 lbs
Looks like a quality tow bar. However, I'm pretty disappointed because the ratings on it were very favorable. I just used it for the first time and it's EXTREMELY tight and difficult to get into or out of the storage position. I'm going to contact etrailer to see if there's something I can do or if it will loosen up over time. I don't want to start loosening bolts. If it stays this tight, my rating would go down to a 1.
Installed as expected as we prepared to leave our home, Disconnected with ease at the campsite. Repeated the process as we prepared to leave the campsite headed home. All facets operated as expected.
# 9
Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
Our Geo Tracker towed perfectly, even through very rough road construction in the Los Angeles area. I hardly noticed the car behind my van. At highway speeds and passing semis the car never swayed or had any problems. I would recommend this towing your car. We have over 3 thousand miles on it so far.
Great looking and fitting
# 10
Roadmaster BlackHawk 2 All-Terrain Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs
This is one of the best, two items I purchased of about 6 or 7 items acquired to rig my 2001 GMC YukonXL for flat towing. The 10,000 lb capacity is valued. the tow bar slides work well. the 3/4inch pins are strong and I have had no problems. The tow bar pulls a YukonXL with some extra stuff, fuel and tools and weighs probably 6,500 lbs (my est--haven't put it on a CAT scale). When I rig my 2020 Chev Silverado Trail Boss to flat tow, I expect to be able to use this.
Easy to install in place of an old Falcon towbar. As you can see in the photo it can be rotated to the side and latched in place. I needed this feature as we carry two electric bikes above the towbar. looking foward to not needing a rubber hammer to release the tension on the bars.
# 11
Blue Ox Ascent Non-Binding Tow Bar - RV Mount - 2" Hitch - 7,500 lbs
Really well built. Great service from etrailer.
On the road in our RV when I discovered our 3yr 7mo Blue Ox Tow Bar had a failure that I was not going to be able to use again. I call Willian S at etrailer about getting a new Blue Ox Tow Bar and having it shipped to a nearby UPS store. William checked to ensure it would be delivered before our scheduled departure. Not only did he assure me it would meet the timeline but he checked it after shipping to make sure it got here. Also he checked about a “like new” tow bar which saved me ~$500. Thanks for keeping me on the road without delay!
# 12
Blue Ox Acclaim Non-Binding Tow Bar - Coupler Style for 2" Ball - Car Mount - 5,000 lbs
Very easy install and high quality products !
Towed a 4 door Rubicon with Dodge 2500 truck. The tow bar did great on the 2000+ mile trip. The bar is very easy to couple and uncouple.
# 13
etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs
The wiring kit for the tow base kit was very well engineered and works very well. The videos for installing the base plate we're awesome step by step process and was very easily accomplished by someone with just a wrench and a drill and a few tools.
Would have gave it a full 5 stars if it would have actually fit into the receiver. Tried both my extension receiver and the OEM 2 inch receiver. Would not budge. Had to grind off the powder coating and then some. Now I need to then repaint to prevent rusting. I would have returned this if I didn’t need it now. Better quality control is needed on the e trailer brand. Guess I know it won’t rattle, lol. Buy a mainstream brand.
# 14
etrailer SD Non-Binding Tow Bar for Blue Ox and Curt Base Plates - RV Mount - 2" Hitch - 6K lbs
1st, the package with “Blue Ox” plates did not include the 3/8-16 nuts ??. [I have doubled nutted the bolt]. The install was straight forward.
Good design but poorly manufactured. Used on a single, multi-week trip: Bar stayed on the RV. Removed when we got home and the powder-coating has cracked and bar is showing rust inside and out. Chrome on extending arms is pitted and beginning to rust. Emailed etrailer but Cody informed me that I would have to ship it back at my expense without any commitment to replace! Disappointed with etrailer after years of previous purchases
# 15
Curt Rambler Non-Binding Tow Bar - RV Mount - 2" Hitch - 7,500 lbs
I ordered this tow bar and D ring adapters specifically for my Bronco and it’s way to sloppy and I can’t use this to tow my Bronco
Make towing easier for a person like me to tow I would recommend it very good product
# 16
Demco Excali-Bar III Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs
Everything arrived timely and well packed. Upon opening, all contents were there and in great shape.Extremely good service! I would order again from etrailer!
Great price, great product. Wish Demco would put a locking hitch pin with their product. Pay the company that much money and you get a standard pin. I think Demco should send a locking hitch pin standard with all of their tow bars and a normal hitch pin with the cotter pin clip optional. Or, just include both, but definitely a locking pin standard with all tow bars.
# 17
Blue Ox Apollo Non-Binding Tow Bar - RV Mount - 2-1/2" Hitch - 15,000 lbs
I love it! It's so nice and strong. Works great. Very easy And quick to connect and disconnect. Best price on e-trailer! Not all the time but I tow a 2500 mega cab ram diesel with no problems.
I'm super impressed how quickly e trailer puts together an order and gets it out the door.! And, even though they have free shipping, they dont skimp, so far ups! And, it's been great.
# 18
etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - RV Mount - 10,500 lbs
etrailer has been just what I need it as a first time tower of a Rv tow car there experience and courtesy of helping someone with no experience has been a huge relief with something so important there help was invaluable all the way through Thank you so much
Very easy to use and handled as well as I expected.
# 19
Blue Ox Ascent Non-Binding Tow Bar - RV Mount - 2-1/2" Hitch - 7,500 lbs
Fantastic customer service and delivery of my tow package in time for Christmas to me !!!
I have purchased other items from etrailer and as usual the delivery is easy to follow and produce as advertised.
# 20
etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plate - RV Mount - 10,500 lbs
First, this bar is extremely heavy, which makes transporting and maneuvering cumbersome and difficult. Secondly, I had issues with this unit from the get-go. I did not receive the correct bolts to attach the Roadmaster clevis to the arm ends. The instructions clearly state that a clevis bolt was to be installed with the XHD unit, but it was not in the hardware bag. I had to call customer service (which was so/so, almost like the person didn't believe me) and had the bolts sent to me. I received the bolts but long story short, they were too short. They did not come out of the bottom of the locknut and any attempt to torque them to the point they did protrude, caused the forks of the clevis to bend, which is too much stress on such an important piece. I did not feel it was safe to either have the bolts not protrude, or force them to protrude. Then came the days-long process of trying to rectify the situation. I called customer service and attempted to explain the problem to the rep. She didn't really want to hear my problem and I was quickly rushed off the phone and directed to call Roadmaster for support, which I did. Roadmaster, of course, has nothing to do with this bar, or problem (pictures were sent to RM) and I was directed to call eTrailer back. I spoke to another person and she was a little more helpful. However, during our "conversation," I could hardly get a word in (I was spoken over and interrupted constantly.) I was told that #1.) the first person I talked to had no idea what she was talking about #2.) Demco manufactures these parts, not Roadmaster, #3.) Essentially the correct length bolts don't exist in the parts catalog. At this point I am starting to get upset with my experience and just wanted a tow bar that worked. I was convinced to but a Roadmaster branded tow bar to avoid any more issues (Blackhawk All Terrain) which I found to be strange, I figured the margin on the eTrailer branded products would be higher, but I digress. Since there is no exchange program with eTrailer, I had to purchase the Blackhawk outright. I was given a UPS label to send the XHD back, but I had to wait to receive the Blackhawk to reuse the box, which is not a huge deal, a minor inconvenience at this point. As of today (4/26/24) I am still waiting for a refund on this unit which I was assured it would be on it's way once the tracking number showed that it was picked up by UPS, but this is not the case. In conclusion, the XHD seemed like it would be a decent product if they can get the hardware right (at least for the Roadmaster system) it's just heavier than most tow bars I have had experience with. eTrailer.com customer service can also use some work, I was not happy with the service after the sale I received. Oh, and the final kick in the tail, the Blackhawk does not come with safety cables. If this were my company, I would have thrown those in for the inconvenience, but I was offered nothing for the trouble this has caused, no discount on the Blackhawk, cables or anything. I will do all I can to avoid buying from etrailer again and will direct others to the same.
Was simple to install. The only hard part was installing the backing nut with the wire handle. That could be done different.
Best 2018 GMC Canyon Flat Tow Set Up RM-522
Rob: Rob here at etrailer.com, and today we're going to be taking a look at the components needed to safely flat tow your 2018 GMC Canyon. So there's going to be five main components that are going to be required to flat tow our Canyon. The first one is going to be our base plate. The base plate is going to mount directly to the frame of our truck, so we have a nice solid connection point for our tow bar to hook up to. And the next component is going to be our tow bar. It's going to hook to the base plate as well as the motor home, so we have a solid connection point.
What our customers are saying:
"very easy to shop"