# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
I had tested while driving with the hitch ball on it and with it on the lowest setting it would scrape against the ground when I am going down a slight slope. I had to switch it to the highest setting to avoid it, it still scrapes so I just leave it off until I need to start towing things.
Perfect fit hitch,wiring kit super easy, great price and shipping. We will be repeat customers when we purchase another vehicle!!!!!!!! Thanks for the great service!!!!
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
All in one kit is Very convenient. but before you order, ensure the rise/drop of this ball mount is correct for your hitch/trailer. Also - there is a gusset plate welded on the back of the ballmount (Drawtite 2953) in this kit, - on the 2010 Dodge Caravan with the Draw Tite Class III hitch,this plate just rubs/touches the bumper, so this draw bar can't be used on 2006-on Caravan.
Nice little bag to store the extra ball and the ball mount when it is not in use. This is an excellent product, pulled my trailer within minutes of installation without a problem. Great feature with the removable ball, includes the 1 7/8" and 2" ball, this is awesome. The 2 3/4" rise fits my Caravan and trailer like they were custom made for each other. The trailer rides almost PERFECTLY level with the trailer. Put an actual level on the trailer after hooking it up and it is only a hair off the level, and of course this is probably due to road conditions. Great product at a fabulous price! I have informed all of my friends and family where to go for all their trailer needs. Thanks ETRAILER.COM! ! !
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
I bought this separately when I bought a new hitch. It appeared to be less expensive to buy the hitch, ball mount, and ball all separately. there's not much to say, just get the one with the correct amount of rise/drop for your car and trailer. 2" rise is what I needed for my Grand Caravan and jet ski trailer.
All ordered parts arrived in good condition, and were correct. Impressed with on time delivery. Hitch and wiring harness were a perfect fit. Only had trouble finding correct wire from brake light switch on 2016 Dodge Caravan .
# 4
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
The web site is so informative with reviews and how-to videos that it made the decision very easy to determine what drawbar kit I needed for a 2012 Grand Caravan. I like the fact that I did not need to talk to customer service to figure out what I needed, all the information was available. Price and shipping was very competitive and I received the order in 3 days.
It fits nicely, is very well hidden under the vehicle. It is worth knowing that one nut requires very high torque.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 6
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Found an install video from etrailer.com for this product. It really made installation much easier! Thanks!
It worked perfectly, It took me like 30 min to install, thanks to etrailer team
# 7
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
Real fast shipping on top of a great price lead to easy instalation. Done it all by myself with no problem but working the frame bolts out is tough. Make sure to run them back up and down while taking them out to avoid breaking.
# 8
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
The purchase was what I expected, it was well packed and delivered very quickly. I would order from etrailer.com again.
Easy to use and haven't had any trouble towing my small trailer with motorcycle on board. Def recommend.
# 9
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.
I actually got my hitch the date they said it would be here to my surprise. When the box arrived it was pretty much beat up, not the hitch just the box. I wished there was instructions how to install it. Overall very satisfied and will buy from 5hem again
# 10
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Looks well made and arrived very promptly
Overly tight on the receiver end bit functions as intended.
# 11
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
I needed to tow a trailer with a 2" ball. My original ball mount has a 1 7/8" ball installed. I had previously tried to change a ball on a hitch and destroyed the nut and damaged the underside of the ball mount. The lock washer had done a great job in keeping the nut from coming off. I dreaded trying to remove my 1 7/8" ball to install a new one that I would only use once. I decided to buy a new ball mount and mount the new 2" ball. This ball mount is so inexpensive that I realized I could have both ball sizes permanently mounted for use in either ball size.
I wasn't sure what type of ball mount I needed for my new Mazda CX-9, so I had to call a representative. The first time I called, the very knowledgeable gentlemen told me exactly how to measure my SUV to figure out the drop I needed. I called back the next day and talked to a lady who helped me figure out exactly what I needed. This is my second purchase from etrailer. The first was a hitch for my old Honda Odyssey, which was also a great experience. The employees are so helpful, the video tutorials on the web site are fantastic and the prices are great. etrailer.com is the first place I go to look for trailer and towing supplies!
# 12
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Raised receiver portion was exactly what I needed to attach my cargo carrier, as my Grand Caravan Receiver was too low to the ground.
We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.
# 13
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Very happy with this ball mount - provides just the amount of drop we required for a level tow of our GeoPro travel trailer by our RAM2500. Plus, the extra length not only allows a tighter turning radius, but also allows us to lower the truck tailgate without having to detach the trailer. Huge improvement on all accounts for us compared to our prior setup. The product is well built and I'm confident will provide us years of good use.
Great customer service. Live in SC - ordered a hitch and USPS delivered it to PUERTO RICO. Go figure. Stacey A refunded my money - but 2 weeks later hitch appeared on my doorstep. All’s well that ends well.
# 14
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
This slightly longer than average bar was perfect for my application. The drop length was perfect also for the application. As usual, eTrailer's site and retail experience was first rate. Lots of info and specs (and videos) available makes it easier to get that piece of mind knowing that what you needed was what you ordered.
# 15
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
Delivery was delayed from the manufacturer. Further delay was encountered when shipment was mis directed to Sheboygan. When it finally arrived there was a hole in the box and the receiver was poking out. Lucky the paint wasn't damaged. The part is what I ordered.
I've got a lowered 1995 VW Jetta with a 1.25" receiver. I had to use a 6" extension along with a long, straight drawbar so any steep incline had me going at an angle and even then I would sometimes scrape. Some one had this drawbar on their Jetta and it looked good. With the measurements provided on this site I determined it would sit far enough away from my bumper and elevate the ball so my trailer wouldn't be angled down so much. Very glad I ordered this unit, it fits the car and works perfectly! Much better than my previous fix.
# 16
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Excellent hitch easy installation.It only took me about an hr and half to install from start to finish
# 17
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
This item should solve the problem I have had with a stainless 3-way ball when I tried to reverse the position on the ball mount. The threads galled between the hex nut and hitch ball.
# 18
Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
I neeed to pull a trailer with my 2019 GMC Yukon. I found Etrailer.com and followed the instructions on determining the drop of the hitch, the instructions were spot on. I hooked up my trailer to my Yukon today, all was level and worked perfectly. I had driven around to Napa, Lowe’s, Home Depot and Walmart, and nobody had the 9” drop hitch I needed. Came back to Etrailer, bought the 2” ball and pin, and the Curt 9” drop hitch. I received the items quickly. Great website, Thanks, Craig
The quality of this product is fantastic and it assembled with no problems and makes my rv / toad I pull a perfect match. I will continue to do business with (etrailer.com) much more in the future. The following photos are of my 1988 Fleetwood Jamboree and my baby (rare 1982 Toyota Corolla Station Wagon) all connected up and the 9" drop towing bar makes my Toyota towing very easy and safe at a level condition with my RV. Also look at the new LED lights installed to dress up my older RV, also purchased from Etrailer.com. I am a happy camper and highly recommend purchasing from them.
# 19
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
works well brings the trailer tongue up to level. I have it on an EV so the raddle is annoying, because I just keep on forgetting to buy a anti rattler.
This is very sturdy hitch. It is made of solid steel, not tubing. It will be used on my Mazda RX-3 to tow my car dolly to the RV lot where I will swap everything around and the car will end up on the dolly behind my RV.
# 20
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
etrailer has what you need
I would give five stars but due to what looks like packaging problems the hitch came very marred and the coating chipping off.
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."