# 1
Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs
I bought this ladder rack because I needed something that would attach to the stake pockets of my f-150 because I have a bed cover. Everything else I found had to hook around the side of the truck bed. Installation was easy. The only issue I had was the forward stake holes didn't have a removable cover. I had to cut a hole in each side.I use them to carry my kayaks when I go camping. They work great for that and carrying anything that won't fit in the bed.
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
# 2
Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
It works great with my bakflip hard cover
# 3
DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs
Delivery was fast as usual. The installation does take a couple hours and is much easier with a second set of hands. I have a drop in bed liner on my F150 so I did have to do some cutting but my oscillating tool made that a quick modification. Make sure to use the no seize on the bolts so they don't heat up when cranking them into place. Lastly, there are NO drain holes in the bottom of the tubes and believe me they do fill with water and ice in cold temps. I drilled two 1/2 in. holes in the sides at the bottom so they can drain but if I realized there were no weep holes I would have drilled a hole in the bottom of each before installation. After drilling the hole, make sure to coat with a primer and some paint to prevent rusting. Other than what I encountered they will serve their purpose and seem good overall.
Still doing the job they were purchased for.
Very pleased with this ladder rack everything was as advertised easy installation very good product!!!!
# 4
Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs
This ladder rack has been great. Very sturdy construction, easy to put together, no issues with rusting, so the coating is holding up well. The only small issue we had with it is that it seems to sag in the middle where the front and the back join just a little bit. We can't quite seem to get it level. It's very possible that is due to how we put it together, but we can't quite seem to fix it. It wouldn't matter much except that we are hauling boats and having the cross bars be level with each other would be helpful.
Still a great product! Has held up really well. Weve taken it off and put it back on multiple times. It takes 2 people to lift it off, but is extremely easy. Definitely a great product
Used it for mounting roof top tent onto utility trailer. Also used to attached water jugs, propane tank, water tank, cree lights, etc. Also used to carry kayak and atv. Rack is high enough from trailer to carry atv and still carry tent on top.
# 5
Adarac Pro Series Custom Truck Bed Ladder Rack - Matte Black - Aluminum - 500 lbs
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
It works great with my bakflip hard cover
# 6
Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
It works great with my bakflip hard cover
# 7
Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Silver
The install was a breeze, and I had all the hardware that I needed. The quality is there, you can tell. It feels secure with the C clamps, but I think I am going to drill and bolt mine on. That's just me.
Easy to put together. Excellent design. Fits my 2021 F-150 4x4 Supercrew 5 foot bed perfectly.
# 8
Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Matte Black
I love it, looks great and easy to assemble. It was very difficult to put the screw through the anchor bracket due to threads being painted over. Other than that, Im very satisfied.
Solid rack good build all the parts were well made. Easy install and works with cross the bed toolbox just had to make a spacer out of metal strap and it looks great. Best price going on etrailer, I'm using it with a crago rack for snowboarding and a vertical mount for mountain bikes.
# 9
Erickson Truck Bed Ladder Rack w/ Load Stops - Steel - 800 lbs
Install wasn’t horrible but I can’t imagine removing it often. The stops naturally don’t slide on the rail but can be relocated without tools which is nice. Seems sturdy. The cons, it’s steel and has started rusting after two weeks in places the paint wore off during install. I will have to clean it up and repaint it to keep it from looking horrible. In addition, the J bolts sit pretty far off the side of my 2007 F150 so the bracket is hanging off the rim inside about an invh. Once all together it doesn’t seem to matter but would be more comfortable if it sat tight. Overall, it gets the job done but if looking for pretty, get something that doesn’t rust.
After a year, the rack looks exactly the same. The surface rust has not gotten any larger. I have noticed that during installation the brackets did bend up the lip of the bed a little but that could be my error or because of the bed liner. Happy with the purchase still.
Very pleased with customer service and the product was in excellent condition. On time delivery. Seller was very responsive and accommodating. Highly recommend purchasing from him!
# 10
Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs
Love it! Holds my 14.5 ft kayak with no problem even with the 5.5 foot bed. Looks great on my truck!
# 11
Buyers Products Truck Bed Ladder Rack w/ Load Stops - Black Aluminum - 800 lbs
Easy to install and looks great on my truck. Perfect for carrying a kayak. Thanks for your timely delivery!
Order arrived at my house in a beat up package. The order came without the hardware and was missing brackets too. What was is the package was scratched and looked very used. Nothing was wrapped inside and the hardware boxes were broken and empty. etrailer should let you know that when you purchase a product it may come damaged and missing parts. Had to drive 3 hours to get one that came in manufacturers packaging. I also need to drive an hour to return to closest UPS center to return product. etrailer take 2 days to produce a return label.
# 12
Thule Xsporter Pro Mid Overland Truck Bed Rack - Aluminum - 600 lbs
It’s very well made, heavy duty. Looks good and should last a very long time. I’ve put my Yakima SkyBox 18 on it and we are ready for adventure.
Installation was pretty easy, and took about 2 hours for me working by myself. I put the rack on my 2021 Toyota Tacoma, and anyone else with a Tacoma and stock bed rail system needs to make sure to order an adapter kit. This rack won’t work at all if you have the bed rails with the included clamps. I mounted a CVT Tent on the rack, and I did need to get longer bolts to get a secure fit on the tent brackets. I’ve seen reviews elsewhere stating that these racks have come with missing or incorrect parts, but etrailer sent me everything needed and it came together perfectly! I did get a faulty clamp with the adapter kit I ordered from [online store], but had absolutely no problems with the rack from etrailer and was really impressed with how quickly they shipped it to me. I got it within just a few days, even with the freight delays around the country and it being the holiday season. I’ll definitely be back here when I’m ready to get the next mods for my rig!
# 13
Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Silver
Very expensive with poor bolt design for top rails. Bolts can easily fall out. Replacement bolts from Thule require the purchase of a whole package for $52. For the price expected a better design
Easy to install. easy to use. An ideal piece of equipment for the back of your truck.
# 14
Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Black
Probably the best rack I have ever purchased, I was looking for a ladder rack that could adjust easily to fit in a parking garage. Directions were very clear and easy to follow. All required tools are supplied. This rack can be removed fast if needed, and has lockable fittings to keep others from easily removing it.
# 15
Thule TracRac Contractor Truck Bed Ladder Rack - Side Mount - Steel - 250 lbs
Great rack! Super stout. Works perfect in my 2008 Sierra.
# 16
Buyers Products Over-The-Cab Truck Bed Ladder Rack - Black Steel - 1,000 lbs
Two of us installed this on my 2016 f150 6.5 bed. We built it in the bed of truck, instead of on the ground. Took about 4.5 hours. I'm quite impressed with the quality (big bolts, self locking nuts). No damage out of box, and all parts included. J hooks are heavy duty. All ladder racks make noise. On my truck it starts at 40 mph. I wrapped front cross beam with a half inch rope to see if it will break up the vortex. If the rope trick doesn't quiet the rack, I'll purchase the metal wind reflector.
This ladder rack was very easy to put together. It is well made and for the price it is well Worth the price.
It is great. Very happy with product.
TracRac Cantilever for G2 Ladder Rack Installation - 2006 Ford F-150
Today in this 2006 Ford F150 with an eight-foot bed were going to add cantilever over the cab extension part number TA44000-02. Well be adding this to our tack rack kit TA21000-02. In order to add our cantilever kit we need to replace the sidles on our existing rack. What well do is go ahead and remove the bolt for the cross bar and then remove the bolt for the sidle unit. Then repeat the same process on the passenger side. Now we got our tension points loosen up.
TracRac G2 Sliding Ladder Rack Installation - 2006 Ford F-150
Today were working on a 2006 Ford F150 with an eight foot bed. Were going to install the TracRac overhead rack system, part number TA21000-02. For installation, well first need to install our base rail kit. The base rails stand up on the edge of the bed rails. They are side, front to back specific so you need to make sure you identify the correct base rail for the driver and passenger side. Once weve done that well need to mark the holes that will be our mounting points.
It works great with my bakflip hard cover