See what our Experts say about this CURT Trailer Hitch Ball Mount

• What Hitch Sticks Out Through the Bumper on a 2024 Jeep Grand Cherokee?
  You're looking for the Curt Trailer Hitch item # C96NR. This custom fit hitch mounts behind your 2024 Jeep Grand Cherokee's rear bumper cover and can be completely hidden when you're not towing or hauling an accessory. The Curt Trailer Hitch item # C96NR is a class III hitch with a 7,500 lbs towing capacity and a 750 lbs maximum tongue weight. It bolts to your Jeep with included hardware and does not require any drilling to install. I have attached a couple of pictures below along with...
  view full answer...
  
• Recommended Hitch for a 2024 Subaru Crosstrek Wilderness
  It sure does! The etrailer Hitch item # e98912 has been confirmed to fit the 2024 Subaru Crosstrek Wilderness.This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I really like the etrailer hitch item # e98912 because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with ground...
  view full answer...
• Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Kia Niro
  We have the Curt Trailer Hitch Receiver # C77NR which is custom fit for your 2024 Kia Niro. This will give you a 2" receiver opening for a large selection of Ball Mounts # C45534 and hitch mounted accessories like a Bike Rack # NV22G. The Curt Powered Tail Light Converter # C59236 will provide you with a 4-way flat trailer connector. This is the connector most commonly found on small trailers. It will also allow for Auxiliary Lights # C53201 should your hitch mounted accessory impair...
  view full answer...
• What Hitch Do You Recommend for a 2024 Toyota RAV4?
  To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item # e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600 lbs maximum tongue weight. I really like the etrailer hitch item # e23ZR because it installs behind your rear bumper and the crossbar is completely hidden. I have linked an installation video below to show you how to get this hitch set up. If...
  view full answer...
• Recommended Hitch for a 2024 Kia Soul
  To add a hitch to your 2024 Kia Soul, I recommend the Draw-Tite item # DT25GR. This hitch is custom fit and bolts to your Kia with included hardware. It does not fit the 1.6L turbo model. This is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 300 lbs maximum tongue weight. I really like the Draw-Tite hitch item # DT25GR because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with...
  view full answer...
  
• Does the Curt Hitch C46DR Fit a 2024 Nissan Pathfinder?
  Yes, it does! The Curt Hitch item # C46DR has been confirmed to fit the 2024 Nissan Pathfinder. This hitch is custom fit and bolts to your Nissan with included hardware. It is a class III hitch with a 2" receiver, that has a 6,000 lbs towing capacity, and a 900 lbs maximum tongue weight. I really like the Curt item # C46DR because of the way it installs. The crosstube is completely concealed by the rear bumper of your Pathfinder. This leaves only the 2" receiver visible which not only...
  view full answer...
• Recommended Hitch for a 2024 Volvo XC60 Recharge
  Yes, it does! The Curt Hitch item # C92WR has been confirmed to fit the 2024 Volvo XC60 Recharge. This hitch is custom fit and bolts to your Volvo with included hardware. It is a class III hitch with a 2" receiver so it will work with almost every bike rack on the market. I really like the Curt Hitch item # C92WR because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. This not only helps with ground clearance but it also looks better. I have...
  view full answer...
  
• Recommended Hitch for a 2023 Lexus RX 350
  The Draw-Tite item # DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item # C29VV. This hitch is custom fit and bolts to your Lexus with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver visible. This not only looks better it also helps with ground clearance....
  view full answer...
  
• Will Draw-Tite Hitch Work With 20 Inch Spare on 2021 Jeep Grand Cherokee L Summit
  Hi Joe; just like the Curt # C96NR, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT42GR does not allow for a 20" spare tire. However, we do have the Blue Ox Trailer Hitch Receiver # BLU46HR. I just reached out to Blue Ox and they said it will accommodate the larger spare. This fits the 2021-2025 Jeep Grand Cherokee L so you can install it on your 2021 Summit L. Are you going to use the hitch for towing? If so, you will also need the Curt T-Connector Vehicle Wiring Harness # C27BR....
  view full answer...
• Recommended Hitch for a 2024 Acura RDX
  Yes, we do! To add a hitch to your 2024 Acura RDX, I recommend the etrailer item # e72AR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I really like the etrailer Hitch item # e72AR because the crosstube installs behind your rear bumper leaving only the 2" receiver visible. This not only looks better but also helps with ground clearance. If...
  view full answer...
• What is the Best Hitch for a 2024 Kia Telluride?
  To add a hitch to your 2024 Kia Telluride, I recommend the Curt Trailer Hitch item # C13420. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper leaving only the receiver exposed. This not only helps with ground clearance but it also looks better. The Curt item # C13420 is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. The towing...
  view full answer...
• 2022 Acura MDX Hitch Receiver and Spare Tire Space
  I will be happy to clear up the confusion for you. The Curt Trailer Hitch Receiver item # C22HR you referenced and the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT42MR will only accommodate the 18" spare on your 2022 Acura MDX. These are the only two hitches available for your 2022 MDX and both have the same dimensions and limitations when it comes to room for your spare tire. The spare tire mounted on the 20" wheel will not fit. Both of these hitches are custom fit and bolt directly...
  view full answer...
  
• Does the Curt Trailer Hitch item # C13382 Fit a 2024 Subaru Crosstrek?
  Yes, it is accurate. The Curt Trailer Hitch item # C13382 is confirmed to fit all models of the 2024 Subaru Crosstrek except for the hybrids. There was a customer that recently installed this on a 2024 with no issues back in May and he sent me in a picture which I have attached below. No modification or customization needed. It went right on his Subaru. If you are planning on towing you will also need a wiring harness item # C56040 and a ball mount kit item # C45534. I recommend using...
  view full answer...
  
• Heavy Duty Trailer Hitch and Wiring Recommendation for 2014 Toyota Highlander with Full Size Spare
  I looked up the online version of your owner's manual, which states that a 2014 Toyota Highlander without a tow package and with a V6 engine, is limited to a maximum allowable gross trailer weight of 2,000 lbs. The tongue weight (TW) should not exceed 9-10 percent of this, so around 200 lbs. Vehicles with a 2.7L L4 engine are limited to 1,500 lbs instead. Class III and IV trailer hitches both feature a 2 inch receiver, however class IV hitches are categorized this way because of their...
  view full answer...
  
• Recommended Hitch for a 2024 Jeep Grand Cherokee 4xe
  Yes, there is. To add a hitch to a 2024 Jeep Grand Cherokee 4xe you will want the Curt Trailer item # C96NR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity and a 750 lbs maximum tongue weight. I have attached a couple of pictures below along with an installation video to help you get this hitch set up and show you what it looks like once installed. If you are planning on towing you...
  view full answer...
  
• Trailer Hitch Receiver For 2021 Jeep Cherokee Trailhawk That Protrudes Through Bumper
  While there is one hitch for your 2021 Jeep Cherokee Trailhawk that exits through the bumper, the # e73ZR does not, as the receiver will be below the bumper of your Jeep. The only option for a hitch that protrudes the bumper of your Cherokee Trailhawk is from Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT28MR I have added a photo of the # DT28MR installed on a Jeep Cherokee Trailhawk so you can see exactly how it will look when installed on your Jeep. If you are planning...
  view full answer...
  
• Recommended Tow Wiring Harness for a 2025 Kia Telluride
  Yes, there is Jason. We actually have two different options and which one you need is going to depend on whether or not your 2025 Kia Telluride has LED lights. I have listed both of them below: With LED Lights - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C29ZV Without LED Lights - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C93FV Both of these custom-fit T-connectors plug into your Kia's wiring harness, which...
  view full answer...
• How to Add 7-Way Wiring on a 2021 Ford Bronco
  To add a 7-Way to your 2021 Ford Bronco you will need a 4-Way kit like the recommended T-One # TK99VR and then the Universal Wiring Kit # ETBC7. The T-One plugs in behind the tail lights of your Bronco and gives you the standard light functions while the ETBC7 comes with everything you need for a fully functional 7-Way. Usually we only see 7-Ways with OEM connections for trucks so your anything smaller than a truck you usually have to install a 4-Way and then an additional kit like what...
  view full answer...
• Recommended Trailer Hitch For A 2025 Honda Pilot Elite
  Hello Hoan, thanks for reaching out. I double checked with the manufacturer, and they confirmed that yes, the etrailer Class 3 Hitch # e27KR will indeed fit the 2025 Honda Pilot Elite. It will be a no drill install and you will not need to cut any of the underbody panels. Keep in mind that the hitch will fit with a mini spare tire stowed under the vehicle but does not fit with a full-size spare. Also, the receiver can interfere with the hands-free liftgate sensor. In most cases, the sensor...
  view full answer...
• Recommended Hitch for a 2024 Audi Q5 Plug-In Hybrid
  Yes, it does! The etrailer Hitch item # e94CR has been confirmed to fit all models of the 2024 Audi Q5 including the plug-in hybrid model. This hitch is custom fit and bolts to your Audi with included hardware. It is a class III hitch with a 2" receiver. I really like the etrailer item # e94CR because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. This not only looks better but also helps with ground clearance. I have linked an installation...
  view full answer...
• Recommended Hitch for a 2024 Toyota Grand Highlander
  Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item # C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like this hitch because the entire crosstube mounts behind the rear bumper. This leaves only the 2" receiver exposed which not only looks better but helps with ground clearance....
  view full answer...
  
• Recommended Hitch for a 2023 Honda Passport
  The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item # C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely leaving only the 2" x 2" receiver visible. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. I have linked a couple of pictures below along with an installation video so...
  view full answer...
  
• Recommended 7-Way Connector and Brake Controller for a 2023 Kia Sorento w/ the Factory Tow Package
  Yes, you can Michael. The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package item # C68JR is exactly what you need to use the Curt Echo Wireless Brake Controller item # C51180. It will provide all the power you need to operate your trailer's brakes. No, additionally wiring is necessary. I have linked an installation video below that will show you how to get the Curt item # C68JR installed. I recommend using the No-Drill Mount for Electrical Mounting Bracket - long item...
  view full answer...
• What is the Best Hitch for a 2024 Toyota Sienna?
  The best hitch for a 2024 Toyota Sienna is the Curt item # C22UR. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight that can be increased to 5,000 lbs and 500 lbs when used with a weight distribution system. The reason the Curt item # C22UR is the best hitch for your Sienna is not only its high towing capacity but the position of the receiver. The...
  view full answer...
  

Do you have a question about this Trailer Hitch Ball Mount?