Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The arms of this unique bike rack attach to any RV or van ladder that has 1" diameter vertical support rails. Pivoting design allows for full use of ladder when bikes are not mounted. Durable, lightweight aluminum is sturdy and rustproof.
Features:
Surco's ladder-mounted bike rack attaches to the vertical supports of your RV's ladder instead of to its rungs so that it can fit a wider variety of applications. In addition, the rack arms have a unique, built-in pivot feature that lets you swing them away from the ladder. Now you can maintain complete access to your ladder - as long as no bikes are mounted at the time - with no need to remove the rack.
To pivot the arms of your rack to the side, simply remove the pull pins from the top brackets of each arm, swing the arms out and replace the pins to secure. Now you have full use of your van or motor home ladder. To use the rack, pivot the arms back and secure them in place in the same manner.
The arms of the rack attach to the ladder supports with sturdy, secure clamps that hold the rack firmly in place, eliminating the bouncing and jostling that can occur with racks that simply hook onto your ladder. Just attach the arms, individually, to the 1-inch-diameter posts of your ladder, and you're good to go.
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
Ratings & Reviews

Bradley D.
10/1/2020
Same problem still. I only put one bike on the rack at a time now.

Deb N.
4/10/2014
Thanks for the follow up. We used the rack a few times and it worked fine. However, we have since sold the RV it was attached to and left it on the rig for the new owners to enjoy.

D. H.
12/1/2020
It continues to serve us well. It is important to recognize the weight limit posted for the product, but within that range it does great.

Heather A.
8/23/2022
Thank you for the photos Abraham. Please keep in mind the weight capacity of the rack is 70 lbs. It looks like the ladder on your RV is shaped a bit differently compared to the ladders we used during our install video. The clamps of the rack should rest on top of the ladder rungs.

Katrina B.
3/3/2023
This has a capacity of 75lbs, so we will need to make sure you are not overloading this rack. Can you send me a picture of how the rack is mounted and how the bikes are mounted on the rack?

Chas J.
9/13/2017
Great. No negative issues. Easy to install and works just like we had anticipated.

Sierra K.
6/8/2021
Thank you for your reply. Here is a video explaining the easiest way to pin the rack: It shows it at the 0:47 mark. If they are still sticking, you may need some lubricant, like WD40. Please take the rack off when not in use as long exposure outside can rust inside the pin holes.

Carl P.
8/15/2020
The carrier has performed as expected and I have been very satisfied. Transferred it to another motorhome we just bought, and it went on without any problems.

Kb
10/25/2017
It still works ok a year later. I would recommend it again. Might need a leather man to stretc the rubber tie down in cold weather.
Do you have a question about this RV and Camper Bike Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.














Vwagner
6/19/2022
Excellent! I now can attach and secure the bikes in under 10 minutes. It would still be ideal if the horizontal bars were a little longer so the bikes could be kept further away from the back wall of the travel trailer and separated a little more from each other. Nevertheless this rack works well and I use cut pool noodles and bungies to hold the bikes firmly in position and to guard the contact locations between the bikes, the rack and the trailer. The cradles can be slid anywhere on the horizontal bar for ideal placement with your specific bikes. It would be good if there was way to hold them in place so they dont move while mounting the bikes and after install. Based on a year of use, I would recommend it in a ladder-mounted application.