Lionshead Trailer Wheel Lug Nut - 9/16"-18 - Stainless Steel - Qty 1

Ask the Experts about this Lionshead Accessories and Parts

• Lug Nuts Keep Coming Loose on Double Axle Trailer
  If you still have the trailer manual, I would recommend checking that to see what the manufacturer of your trailer has set as the recommended torque specs for your hubs; a majority of the time, these issues are rooted in over/under tightening of the lug nuts like the # LHLR110. This is also a good time to make sure that your wheels are properly rated for your fully loaded trailer- which could be another potential cause. When you take into consideration the stress that is put on hubs...
  view full answer...
• Are Right Handed Lug Nuts More Likely To Loosen When Installed On the Left Hand Side Of a Trailer
  I think what you are asking is if right hand threaded lug nuts have a greatly likelihood of coming loose when installed on the left hand side of the trailer in comparison to when they are installed on the right hand side of the trailer due to the direction the wheel is rotating. If that is the case then this was a concern at one time but more accurate testing has confirmed that it makes no difference as to what way the lug nut threads on in relation to the rotation of the wheel. If you...
  view full answer...
• What Does Right Hand Thread Mean for Trailer Lug Nuts
  Right hand thread means that they tighten turning clockwise like what you have. Older vehicles and trailers used to put left hand threaded lugs on one side of the trailer and right hand on the other. The thinking back then was that they all had to tighten a certain direction relative to the rotation of the wheels otherwise they would loosen on their own from inertia while traveling down the road. In recent years we've learned that's not true so basically everything now is right hand thread.
  view full answer...
• Recommended Lug Nut Torque Spec for 16 Inch Viking Aluminum Wheel
  The Provider ST235/85R16 Radial Tire with 16" Viking Aluminum Wheel # A16RGBML is compatible with either 1/2"-20 or 9/16"-18 wheel bolts, the recommended torque specification will depend on which of these two your hub uses. The tire, however, is not a factor. Torque 1/2"-20 lug nuts like # LHLR103, to 90-100 ft-lbs. Torque 9/16"-18 lug nuts like # LHLR110, to 120-140 ft-lbs. I've attached a comprehensive Lug Nut Torque Specifications chart for you as well.
  view full answer...
• Is Westlake LHWL097 Tire Available Mounted on AM20457 HWT Aluminum Hi-Spec Wheel
  We get the wheel/tire combos already mounted from the manufacturer, as we don't have tire mounting equipment here. Also, we obtain the Westlake tires and HWT Aluminum wheels from different distributors, so I'm sorry to say it isn't possible for us to obtain them that way. This being said, you can always purchase the # LHWL097 Westlake tire and the HWT # AM20457 Hi-Spec wheels separately and have them mounted at your local tire shop. The wheel is compatible with 9/16 inch lug nuts, which...
  view full answer...
• Recommended Lug Nuts for Westlake ST235/85R16 Radial Tire w 16" Lynx Aluminum Wheel
  In order to use the Westlake ST235/85R16 Radial Tire w 16" Lynx Aluminum Wheel part # LHAX425 you'll need the long acorn style closed lug nuts, part # 12CLN-L for 1/2" studs or part # LHLR110 for 9/16" studs. Furthermore, you'll need a 7/8" socket possibly one with thin walls known as a lug nut socket. If a regular 7/8" socket doesn't work you can get the lug nut socket from a local auto parts store.
  view full answer...
• Which Lug Nuts for Taskmaster AX02665865HDBMMFL Viking Valhalla 16x6.5 Trailer Wheel
  Because the holes for the lug nuts on the # AX02665865HDBMMFL Viking Valhalla wheel are countersunk, a regular lug nut won't work. You'l need a longer lug nut like # 12CLN for a 1/2-20 or # LHLR110 for a 9/16-18. The wheel you specified is compatible with both 1/2 inch or 9/16 wheel studs.
  view full answer...
• Recommended Lug Nuts and Cap for 16" Lynx Wheel and Westlake Tire Combination
  For the Westlake ST235/85R16 Radial Tire w 16" Lynx Aluminum Wheel - 8 on 6-1/2 - LR G - Silver # LHAX425, the lug nuts I recommend will be determined by the wheel stud diameter. For instance if you have 1/2 inch wheel studs, then I recommend the Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1 # LHLR103. If you have the 9/16 inch wheel studs, then I recommend the Lionshead Trailer Wheel Lug Nut - 9/16"-18 - Stainless Steel - Qty 1 # LHLR110. You may also be...
  view full answer...
• Does Pilot Hole Size Have to Match to Use Lionshead Trailer Wheel
  The Aluminum Modular Trailer Wheel - 16" x 7" Rim - 8 on 6-1/2 # LHJM513 has a 4.88" pilot diameter and will work for your horse trailer. Ther pilot diameter does not have to match your old wheel because this wheel fits over the lugs of your hub, and not the pilot hole, so you just need the correct size lug nuts to match your hub. This wheel is compatible with Lionshead Trailer Wheel Lug Nut - 1/2"-20 # LHLR108 or Lionshead Trailer Wheel Lug Nut - 9/16"-18 # LHLR110. For a center...
  view full answer...
• Compatible Wheel Stud Diameter for Taskmaster A16RG8BMMFL Wheel/Tire Combo
  It is indeed true, the 16 x 6-1/2 inch wheel used on the # A16RG8BMMFL wheel/tire combo is indeed compatible with 9/16-18 or 1/2-20 lug nuts. A standard 'deep' lug nut would be used, such as # 12CLN for a 1/2 inch or # LHLR110 for a 9/16, whichever your hub calls for. I've linked you to a product description and an install video.
  view full answer...
• Torque Spec for 17.5 Inch Aluminum Lynx Trailer Wheel
  The Aluminum Lynx Trailer Wheel part # 274-000006 for starters will require a long style acorn lug nut like the Lionshead Trailer Wheel Lug Nut part # LHLR110. The torque spec of these lugs nuts while used on that will be around 130 ft. lbs. to 150 ft. lbs.
  view full answer...
• Which Provides the Best Corrosion Resistance, ESR Finish or Aluminum Wheels?
  In terms of good, better and best corrosion resistance, the Black ESR Finish wheel # 660865M1LDMX you referenced is what we would consider the "better"option. While better than galvanized wheels, it's still a steel wheel which means that over time the inevitable nick or scratch will expose the steel, making it susceptible to corrosion. For the best corrosion resistance, an aluminum wheel/tire combo like # LHAWSO513B provides far superior coverage. It has a maximum load capacity of 3,520...
  view full answer...
• Correct Lug Nut for LionsHead Lynx 274-000006 Aluminum Trailer Wheel
  The Lynx # 274-000006 wheel you're interested in uses a 9/16-18 60° coned lug nut like # 6-53 or # LHLR110, as confirmed by LionsHead.
  view full answer...
• Does Provider ST235/85R16 Radial Tire w 16" Viking Aluminum Wheel # A16RGGMML Come with Lug Nuts
  The Provider ST235/85R16 Radial Tire w 16" Viking Aluminum Wheel # A16RGGMML that you referenced comes with center caps like what you see in the product pictures but lug nuts would need to be ordered separately if needed. If you need 1/2 inch diameter lug nuts you'd need the part # 12CLN or if you need 9/16 inch diameter lugs part # LHLR110.
  view full answer...
• Lug Nuts and Center Cap for Lynx Trailer Wheels
  The Lynx Trailer Wheel # LHSL513 is a 16" x 6" wheel with an 8 on 6-1/2 bolt pattern and 4.9" pilot diameter. For lug nuts you can use the Lionshead Trailer Wheel Lug Nut # LHLR110, which fit the 9/16" wheel bolts of the wheel, and for center caps, you would use the Lionshead Trailer Wheel Center Cap w/ Snap-In Plug # LHCS109-SI60C. I have added links to video reviews of each of these products for you to take a look at.
  view full answer...
• Recommended Trailer Lug Nuts And Components Compatible With 16 Inch Aluminum HWT Hi-Spec 03 Wheels
  The lug nuts I recommend for the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel w/-8mm Offset - 16" x 7" Rim - 6 on 5-1/2 # AM22657 are based on the lug stud size and finish preference. I recommend using the Americana Trailer Wheel Lug Nut - 13/16" Diameter - Stainless Steel - 1/2" - 20 # AM90054 for 1/2 inch lugs or Chrome Trailer Wheel Lug Nut - 1/2" (Each) # 12CLN. For 9/16 inch studs, I recommend the Lionshead Trailer Wheel Lug Nut - 9/16"-18 - Stainless Steel - Qty 1 # LHLR110. You...
  view full answer...
• Compatibility of Lionshead Westlake Tires and Bobcat Wheels with 28 Foot Enclosed Car Hauler
  The Westlake ST225/75R15 Radial Tire w 15" Bobcat Aluminum Wheel # LHAWSO311B does not require special lug nuts. The steel inserts in the lug nut wells help prevent the holes from wearing down and ensures the wheel stays secure to your hub. You may choose to use lug nuts like # LHLR103 for 1/2 inch or # LHLR110 for 9/16 inch based on desired look and wheel stud size. Many people also choose the center cap # LHCS108-SI60C for their desired presentation. Each tire and wheel combination...
  view full answer...
• Lionshead Westlake Wheel Tire Combination # LHAS701 Compatibility With Dexter 8,000 lb Oil Bath Hubs
  Thanks for all the info. The Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel - 8 on 6-1/2 - LR H - Black # LHAS701 will absolutely fit on your hubs and studs. The 9/16 inch studs are a standard size and will work well with these wheel/tire combinations. Any lug nuts with the 60 degree cone that is standard will work to center and secure your wheels, but if you want easy to use and clean looking lugs, I recommend the Lionshead Trailer Wheel Lug Nut - 9/16"-18 - Stainless...
  view full answer...
• Lug Nuts for Wheel on 2013 Heartland Big Country 3691SK
  According to my research your 2013 Heartland Big Country 3691SK uses 235/80-16 tires with a 16 inch wheel like the Westlake ST235/80R16 Radial Trailer Tire with 16" White Mod Wheel # LHAW211 with a hub that has either 1/2 inch studs like # 42866UC3 or 9/16" studs like # 8-219-13UC3. We don't have any way of knowing which is on your specific trailer so the only way to know is to measure with a digital caliper like # PTW80157. Once you do know you will need either: - 1/2"-20 Trailer...
  view full answer...
• Recommended 16 Inch Aluminum Tire and Wheel Combination with 6 on 5-1/2 Inch Bolt Pattern
  We have a few options available. I recommend the Westlake ST235/80R16 Radial Tire w 16" Jaguar Aluminum Wheel - 6 on 5-1/2 - LR E - Silver # LHAWSJ511S. This combination has a few benefits over the other options. It is nitrogen filled so it will maintain tire pressure better than those with standard air which helps prolong the life of the tire and wheel. It also comes with steel inserts in the aluminum wheels to prevent holes from wearing down and eliminate the need for constant retightening...
  view full answer...
• Looking Fore One-Piece Acorn-Type Wheel Lug Nut
  We do offer a one-piece lug nut, assuming your wheel studs are a 1/2 inch with a 20 thread per inch thread could. If that's the case, you'd need part # AM90049. If you have 9/16-18 studs, we don't offer a one-piece lug nut, you'd need to go with part # LHLR110 which is a steel lug nut with a stainless jacket. I've linked you to product description videos for the lug nuts mentioned above.
  view full answer...
• Lug Nut Covers for RV Trailer Wheels
  I have a solution for you, however, we do not carry snap on lug nut covers small enough to fit the lug nuts on your trailer. We do offer lug nuts with a finished back if you are okay with replacing your lug nuts. If you need 1/2 inch lug nuts, part # 12CLN would work well for you. If you need 9/16 inch lug nuts, you would want part # LHLR110.
  view full answer...
• Recommended Lug Nut Cone Angle for HWT # AM22657 Aluminum 16x7 Mod Trailer Wheel
  The wheel is compatible with a lug nut with a 60 degree cone. Because the actual hole for the stud is recessed, using a longer lug nut like # 12CLN for a 1/2 inch or # LHLR110 for a 9/16 is recommended.
  view full answer...
• Which Lug Nuts and Center Cap for Lion's Head 274-000008 Jaguar 16 x 6 Aluminum Trailer Wheel
  Lug nuts and the center cap are both sold separately. The Lion's Head Jaguar # 274-000008 wheel is compatible with both 1/2-20 or 9/16-18 wheel studs. You'll want to use a lug nut with a 60 degree cone like # LHLR103 for a 1/2-20 or # LHLR110 for a 9/16-18. The compatible center cap is part # LHCS108-SI60C I've linked you to a product description video for the # 274-000008 wheel.
  view full answer...
• 7,000 lb Trailer Axle 6 To 8 Lug Hub Conversion
  We have what you need to upgrade your 7,000 lb trailer axles but there are some things that we need to take a look at. Check your ID seal on your spindles. If they require a 2-1/8 inch seal, your wheel size is 16 to 17-1/2 inches and you have a 12 inch brake assembly, then you can use the Dexter Trailer Hub Assembly # 8-219-9UC3. This is for 5,200 to 7,000 lb axles. Now, for your idler axle, if it is a 5,200, 6,000 or 7,000 lb axle and has #42 spindles, you can use this Dexter Trailer...
  view full answer...
• Lug Nut Recommendation for Boat Trailer With 6 Bolt Wheels
  The most common wheel stud diameter for trailer wheels is 1/2 inch which the part # LHRL103 would be a great option for as it's a stainless steel lug nut that won't corrode. The next most popular size is 9/16 inch which is common on larger capacity axles like you may have. For that you'd need the part # LHLR110. Most likely you have 1/2 inch diameter studs but there are some 6 lug hubs that have a 9/16 inch diameter to so you'd want to measure yours to be sure. If you are unsure you...
  view full answer...