See what our Experts say about this CURT Trailer Hitch Ball Mount

• Recommendation 1-1/4 Inch Drawbar with 3-1/2 Inch Rise on 2015 Nissan Altima
  We have a 3-3/4 inch rise that works great with your trailer, item # C45023 . It's the Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs drawbar. It is slightly taller than your desired rise. But once the trailer is hooked up, the weight will bring it down closer to that 3.5 inch you were looking for. Also, this drawbar is a Class I which suits your hitch. We have a review video for this product that I've included. You could use a Class II drawbar with your Class I hitch since...
  view full answer...
• Will The Curt Trailer Hitch Receiver C94UR(11612) Fit a 2023 Chevrolet Trailblazer RS?
  Yes, the Curt Trailer Hitch Receiver # C94UR is confirmed to fit your 2023 Chevrolet Trailblazer RS. If you will be using this for towing you will want to use the Curt Class I Drawbar # C45023 along with either a 1-7/8" # C40001 or 2" # C40018 hitch ball. The Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT will allow you to secure the ball mount and trailer to your Trailblazer when towing. The T-One Vehicle Wiring Harness # TK26VR will give you a 4-way flat wiring...
  view full answer...
• Recommended Hitch and Wiring Harness for a 2022 Kia Seltos
  First you will need a Curt Trailer Hitch Receiver item # C65FR to attach to your 2022 Kia Seltos. This class I receiver has a 1-1/4" receiver tube and is capable of supporting up to 200lbs of tongue weight and 2,000lbs trailer capacity. Be sure not to exceed the towing capability of your Seltos given by Kia. A Curt Wiring Harness item # C89KR will allow you to plug into your factory tail light wiring so that you do not need to splice into your tail light harness. You will need to run...
  view full answer...
  
• Trailer Hitch Receiver and Vehicle Wiring Harness For a 2024 Honda HR-V
  Yes, the Curt Trailer Hitch Receiver # C68DR is confirmed to fit your 2024 Honda HR-V. This is a class I receiver with a 1-1/4" opening. You will need to ensure any Ball Mount # C45023 or hitch mounted accessory is going to be compatible with the class I receiver. The Curt Powered Tail Light Converter # C59236 will allow you to add a 4-way flat connector on your HR-V. This is the common connector used on small trailers you might tow and can be used with Auxiliary Lights # C53201.
  view full answer...
• How to Determine the Rise/Drop of Class I Ball Mounts
  There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that of the receiver, you'll need a ball mount with a rise. If the coupler height is smaller than that of the...
  view full answer...
  
• 2021 Kia Soul Trailer Hitch and Wiring Recommendations for Towing a Trailer
  To get your 2021 Kia Soul ready to tow a trailer you're going to need a trailer hitch, wiring kit for the trailer lights, and a ball mount kit. Please note that when I looked up the online owner's manual for your 2021 Kia Soul it stated that Kia does not recommend towing with your vehicle. If you choose to still do so I recommend using the parts mentioned below. I recommend going with the Curt Trailer Hitch Receiver # C67FR and T-Connector Wiring # C89KR for the parts that install on your...
  view full answer...
• Trailer Hitch and Wiring for a 2008 Kia Rondo
  Yes, you can tow a trailer with your 2008 Kia Rondo. I found a copy of the owner's manual online and found the following towing capacities. First, if the trailer does NOT have brakes models with the 2.4 or 2.7 liter motor can tow 1,000 pounds. If the trailer does have brakes then the 2.4 can tow 1,500 pounds and the 2.7 can tow 2,000 pounds. The tongue weight capacity for the 2.4 liter is 150 pounds regardless of whether or not the trailer has brakes. And for the 2.7 liter it is 200 pounds. I...
  view full answer...
• Interchangeable Ball Set for a Curt Class I Trailer Hitch and Ball Mount for a 2008 Mini Cooper S
  The Curt trailer hitch for a 2009 Mini Cooper S is # C11130, which is a Class-1 hitch with a 1-1/4" square receiver opening. This is for hardtop or convertible, but not for models with a single center exhaust. You will need a ball mount and tow bar to tow a small trailer. I recommend the Curt # C45023 mount and a Curt # C40018 hitch ball with a 3/4" diameter shank. For wiring use kit # 119250KIT. I have linked the wiring instructions as well.
  view full answer...
• Will the Curt Hitch # C11031 Fit on a 2010 Kia Rondo with V6 Engine
  Yes, the Curt Trailer Hitch, item # C11031, will fit both the 4 and 6 cylinder models of the 2010 Kia Rondo, so it will fit. You may also be interested in the following items to complete your Class I towing setup. T-One Trailer Wiring Harness, item # 118431 Curt Drawbar, item # C45023 1-7/8 inch hitch ball, item # 19256 2 inch hitch ball, item # 19258 Hitch Lock, item # e98879 Pin and Clip, item # PC2
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?