Switch between trailers without swapping ball mounts. This adjustable dual-ball mount fits 2-1/2" hitch receivers, helps keep different trailers level, and stows the hitch balls underneath when you're not towing.
When you're done towing, rotate the dual-ball assembly beneath the shank until your next trip. With the hitch balls tucked underneath instead of sticking out behind your truck, you have more room to walk around the back of your vehicle while leaving the ball mount ready for the next tow.
The StowPro receives a liquid A-coat before the carbide black powder coat is applied. Together, these coatings help protect the inside and outside of the ball mount against corrosion from road spray and rain.
Measure from the ground to the top inside edge of your hitch receiver opening, then measure from the ground to the bottom of your trailer coupler while the trailer is level. The difference between those measurements determines how much drop or rise you need to tow your trailer level.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, Matt with the etrailer. Today, we're gonna be talking about the CURT StowPro Ball Mount. Now, this is gonna be designed for your 2-1/2-inch hitches, and it's gonna have a weight capacity of 18,000 pounds. So, let's take a closer look at it. This is gonna be a great option for anyone who has had that ball mount for quite some time, and you're kind of tired of it being in your way. You've hit your shins on it a few times.
And you want something that's just gonna look a bit nicer when you're on the road, that won't stand out too much. That's what I really like about this, but it's also gonna be adjustable. So, you can help pair this up with a lot of different trailers out there of varying heights and coupler sizes, because we'll have a 2-5/16, and we'll have the 2-inch one. There are gonna be two holes. This one right here is gonna be for the stow position, and then the one next to it is gonna be for the towing position.
So, the ball we have up top, that's our 2-inch one, and it's rated for 10,000 pounds. If I flip this 180 degrees, the 2-5/16 one is gonna be rated for 18,000 pounds. So, make sure you are using the appropriate ball for the coupler and matching the weight capacity. Other weight capacity, you wanna make sure you're staying aware of is gonna be the tongue capacity. That's gonna be 1,800 pounds for this.
So, the difference between your tongue capacity and your towing capacity is towing is what you're pulling behind you, total weight of the trailer and its contents, and tongue capacity is gonna be the downward force being applied to the ball. But it's always important to go from the lesser-rated component, so just double check what your vehicle is capable of towing as well. Look at the top of our ball mount. Everything that we need to know is gonna be listed here, so our capacities and even our rise and drop. So, right now, I have in the drop position, we have a max of five inches, and the rise position of max of 5-1/2.
So, what that means is we can go as far down as five inches, but we have spots in between that we can go to as well. So, I'm gonna remove those pins. So, I can go all the way down to this position. Make sure you are using both pins. I'm just doing this for demonstration purposes, but you notice we have a lot of different holes that we can also use. So, all the sets in between are gonna be at our disposal, even this one at the very high point. Now, something I've noticed on both sides with the ball, and the actual rise and drop of this, and this is all very smooth to actually use. I don't find that I'm having a lot of tightness with the pin and clips. There's pretty good resistance to have with this the entire way down. And when I go to flip this around, I also need to make sure that I'm putting that ball in the stow position. So, even doing this with this kind of loose at the moment, still really easy to work with. That's the biggest thing I'm looking for with something like this. I've had some in the past where it's just kind of fighting me the entire time. It's not giving me a lot of convenience. This here is pretty smooth. This is not gonna come with a pin and clip, so I'd recommend grabbing one. A locking one for something like this is something I would recommend just because it is gonna be a little bit nicer. But let me put it up in the rise position and show you guys a few more details. So, we are gonna have two holes. These holes let you choose how close do you want this to sit to your truck, depending on the clearance. And we do have a hollow shank, so that makes it a little bit easier to handle. And the last few details is this is gonna be made from steel, and this is gonna have a Liquid A coat on here. And what that means is, one is gonna be very sturdy, very strong, lasts you a long time, and that coating is gonna help us not rust over time. Now, overall, I do think this is a great option. Even looking at it right here, this is gonna be something that stays very nice, compact, close to your vehicle, so you don't run into it, and it's not gonna be super noticeable either. Now, there is another brand that has something very similar to this. That's gonna be B&W. What I like about those is they also have the toe and stows, and they look really nice, but they also have some specifically designed for your GM or Chevy trucks. If you have that multi-pro tailgate that swings further down, a lot of times, this corner will still make contact with something like this, so it is important to double check that. So, if you do have that multi-pro tailgate, I'd go with that instead. BMW is also very reputable, but so is Curt, and I don't think you can go wrong with either option, just depending on what type of tailgate you have. Now, if you guys have any other questions, let us know here at etrailer. And again, I'm Matt, and thanks for watching.
Ratings & Reviews
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.