Switch easily between trailers with this adjustable, solid steel ball mount. Go from a 6" drop to a 7" rise. Tow up to 20,000 lbs with either the 2" or 2-5/16" ball. Forged steel shank is powder coated for corrosion resistance.
Features:
Specs:
This Fastway Flash Solid Steel Series ball mount offers exceptional durability and strength while maintaining a high-quality appearance. Its solid forged steel construction is durable and sturdy enough to last for years to come. With a rust-resistant glossy finish, this ball mount will make any vehicle look fantastic.
The adjustable ball height lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
Changing Ball Height and Replacing Balls
To adjust the height of the ball, remove the included pins so that you are able to slide the ball platform up or down along the shank to the desired position. Re-insert the pins once you have found the correct height. Switching the hitch ball is just as easy. Simply remove the pins holding the ball platform in place and slide the platform off of the shank. Flip the platform upside down so that the ball you want to use is on top. Then slide the ball platform back onto the shank and replace the pins and clips.
Average Customer Rating: 4.8 out of 5 stars (234 Customer Reviews)
Switch easily between trailers with this adjustable, solid steel ball mount. Go from a 6" drop to a 7" rise. Tow up to 20,000 lbs with either the 2" or 2-5/16" ball. Forged steel shank is powder coated for corrosion resistance.Very fast 726104
We are very pleased with hitch, and how fast we recieved it. We will do buisness with this company again. 720149
Shipping was fast from etrailer and the price was good. I used the hitch to pull a flat bed out of storage, but haven't gone down the road yet. It is easy to use and very heavy duty. As some other reviews mention, there is a little too much of a gap so the hitch may rattle in the hitch when in use. There may be a product out there that can be used to fill-in and stop the rattle. I also bought the Hitch Locks (FA86-00-4225) and they work great. For the price, this is a great adjustable ball mount. 735451
Hitch was great, however the locking pin I purchased with it was CHEAP CHEAP....hitch got stolen in my driveway...meaning the thief did not have to expend much effort in getting the "locking" pin off....we or my 3 dogs would have heard the noise 732684
Great product... Good be improved with a better coating/powder coating, other than that I'll give it a 5/5. 727930
I order this item for a gentlemen in the catering business to pull multiple size ball trailers. I installed it yesterday on his truck and he was totally amazed with the quality and happy to know he did not have to carry multiple receiver hitches. He had just purchased a new truck and he loved it. Thanks 599846
Product came in 4 days of ordering, very heavy duty feel. Can't wait to actually hook it to the my dump trailer later this weekend. I do wish there was a way to lock the ball head to the hitch. 654064
Haven’t towed with it yet, but I’m pleased with it for the price. After research I determined this hitch doesn’t push the ball a mile away from the truck like some other adjustable ball mounts. For the ratings it can’t be beat for the price. Extremely fast shipping from etrailer.com. 671514
Installation is easily done in 30 minutes in the driveway. Some maneuvering is needed to get the Curt receiver past the factory receiver mounting brackets. There is a clearance issue between the Curt receiver and a factory crossmember on both sides which can be remedied by adding a 3/4" grade 8 washer between the receiver and the frame on each side. It is easiest to torque down the four vertical bolts before installing the two horizontal ones as they interfere with getting a socket on the two rear vertical bolts. Curt did a good job eliminating all failure points (bolts) on the receiver hitch itself and the welds are solid. Overall the Curt receiver is overkill in a good way and it would be hard for even a good fabricator to design one that is stronger. Included are pictures of how it looks on a relatively tall factory height 2009 Dodge 3500 DRW with a 6" Fastway drop and 1220 pounds of tongue weight. 693755
This is awesome. I used to have a ball and a receiver for the three kinds of trailers I pull, Now I use this one for all my trailer needs. It also has a 12,000 limit with a 2"ball so pulling a Mini excavator or skid steer loader with no worries of exceeding the limits. 692383
939982
very rugged well built design...very sa tisfied 938179
Best hitch I’ve ever used. It’s heavier than I expected, but then again, I’ve never owned a hitch rated for 20k lbs and 2k tongue weight. As beefy as this hitch is, it doesn’t extend the ball mount too far out like others, to where the chains barely reach sometimes. Can’t beat the price, similar weight rated hitches can go for double the price of this one, and honestly if price where the same, I’d still choose this one. Normally anything I tow over 10k lbs, is gooseneck trailers. Today I moved this tiny home that weighed in at 13k lbs and 2k tongue, about 50 miles away. Did not have a problem traveling at speed limit with hardly any swaying. 937071
Excellent 932944
It has worked for all applications I needed. Great product. 924186
Good hitch. Showing signs of rust after two dips into saltwater but that is expected. 924148
Extremely heavy duty. Easy to change heights. Only thing that could make it any better would be a pin lock on adjustable part of receiver 921047
It looked well made and it is very heavy compared to others ,but the 2.5 in receiver is nice. 916122
907173
Love it! Bought so I didn't have to worry about having multiple hitches. Plus with the 2-1/2" shank, don't have to worry about my dad or brother stealing it (doesn't fit there trucks). Have 2 trailers that I mainly pull with this. One has a 2" ball and the other 2-5/16". Have had dump trailer gross out at 17,000lbs with load and weight of trailer and this has held up great. Normally in the 14,000 to 15,000 lb. range. Not a Con for me, but this thing is heavy. I don't know what it weighs, but may be a negative for some people. 905007
Hitch came in very quickly and was everything I hoped it would be.. this thing is a beast and can't wait to pull will it. Thanks 901968
What I like • The fact that I do not need a spacer between typical class 2 hitch and my truck • Good overall design. What I do not like • The hitch starts rusting almost immediately where the hitch slides into the receiver. • The Powder coating starts flaking off within 2 months and continues to flake to this day. • The Pins that hold the Ball mount must have never seize or they will require you to tap with a hammer when adjusting height or flipping from one to the other. Why didn’t I return the Hitch? I am a very detailed person who is good about maintenance, so I use Corrosion X regularly anyway, so I spray the hitch as well and keep on trucking! 884142
Well built for towing heavy loads. Gives you the confidence with the adjustable height to get the trailer level towing 16000 lbs 883397
873817
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.