See what our Experts say about this Dexter Accessories and Parts

• What Electric Brakes For Dexter 3,000 Hub 008-418-02
  Hey Lance, Thanks for the info, and I reached out to Dexter who said you have a 3,000 lb axle that uses hub 008-418-02. Unfortunately Dexter discontinued both this axle and hub, though the brakes that fit are the following: - Dexter Electric Trailer Brakes # K23-472-473-00 You mentioned the right side only, so if you only need that the part is # K23-473-00. As for the hub, it's possible there may be someone who still has it, otherwise you'd need a new axle altogether; if that's something...
  view full answer...
• Replacement Brake Shoes and Magnets for Dexter 10" x 1-1/2" Brake Assembly 23-472-00 and 23-473-00
  Hey Dave we do offer replacement brake shoes for your Dexter Electric Trailer Brakes Left/Right Hand Assemblies item # K23-472-473-00. They are the 10" x 1-1/2" Electric Brake Shoe/Lining One Wheel item # bp04-065. You'll need two sets to do both brakes. We also offer replacement magnets, item # BP01-068. For a spring kit you can use item # K71-362-00, for the adjuster item # BP10-060 and for the adjuster dust plug item # BP10-220. We also offer the magnet retainer clips, sold in packs...
  view full answer...
• Replacement Dexter 10 x 1-1/2-Inch Electric Drum Brakes for Old Camper Trailer
  We do actually have Dexter electric drum brakes in your required 10 x 1-1/2-inch size, parts # K23-473-00 and # K23-472-00, which are right- and left-hand, respectively. These are complete bolt-on (4-bolt) replacements that fit wheels diameters from 13- to 15-inches and they are rated for a 3000-lb axle capacity. They include mounting hardware. Please refer to the linked review video for more details. I recommend completely replacing both entire brake assemblies. Given the age of the trailer...
  view full answer...
• Converting Trailer Surge Brakes To Electric Brakes
  To convert your trailer from surge o electric brakes, you'll need new electric brake assemblies like # 23-105 and # 23-106 If you have 12" hub and drums. Or, # K23-473-00 and # K23-472-00 if you have 10 x 1-1/2" brake assemblies. You'll need to also replace or lock out your surge brake coupler if you don't wan to replace it. Finally you'll want to add a 7 way with # ETBC7 and a brake controller like # RED44FR.
  view full answer...
• Grease Seal, Bearings, Races, And Brake Assembly For Dexter 2,800 Pound Axle
  The Dexter Electric Trailer Brake Assembly # K23-472-00 left hand and the Dexter Electric Trailer Brake Assembly # K23-473-00 right hand will be what you are looking for. For your bearings and races I found Replacement Trailer Hub Bearing # LM67048 and it's matching race Replacement Race for LM67048 Bearing # LM67010; and a bearing kit for the next set, Bearing Kit L44649 # BK1-150. This kit includes your last bearing and race along with a seal, spindle washer and a cotter pin. I did call...
  view full answer...
• Are There 10 Inch x 1-1/2 Inch Electric Brake Assemblies
  We do offer electric brake assemblies which measure 10" x 1-1/2": - Dexter Electric Trailer Brake Assembly - 10" - Left Hand # K23-472-00 - Dexter Electric Trailer Brake Assembly - 10" - Right Hand # K23-473-00 These brakes come with all the needed installation hardware, but are manual adjusting so if you don't have an adjustment spoon you will need the Brake Adjustment Spoon # W80630. I also wanted to mention that these mount to a standard 4-bolt brake flange such as # 4-35 which has...
  view full answer...
• Availability of Replacement Brake Shoes for Brake Assembly on Dexter 2.8K Axle
  For your Dexter 2.8K axle, we do indeed offer replacement brake shoes. The part number is # BP04-065. We also offer replacement magnets, # BP01-068 for the oval magnet. We offer replacement actuating arms for the magnets, # 47-112-4 for the left hand or # 47-113-4 for the right hand. For a spring kit, use # K71-362-00, for the adjuster, part # BP10-060 and for the adjuster dust plug, part # BP10-220. We also offer the magnet retainer clips, sold in packs of four as part # BP19-001. Brake...
  view full answer...
• Solution for Needing Replacement Actuator Arm/Pads/Springs for 10 inch by 1.5 inch Assemblies
  Since we do not have the replacement actuator arm for your Dexter 10 inch by 1/2 inch brake assemblies and I know you are also looking for replacement shoes/linings and springs your best solution will be all new assemblies for a couple reasons. The price to replace the individual parts is about the same as new assemblies like part # K23-472-00 for the left hand side and part # K23-473-00 for the right hand side. The other reason is the install will be much easier since it's just an assembly...
  view full answer...
• How to Select Electric Drum Brakes for Single Axle Venture Boat Trailer
  Trailer brakes are sized as needed to reach the stopping power required for the axle weight rating. We have electric drum brakes for 2K axles that measure 7 x 1-1/4-inches and that work with 13-inch wheels, such as # AKEBRK-2 and we have brakes for 3K axles like # K23-473-00 and # K23-472-00 which are 10 x 1-1/2-inches and that also work with 13-inch wheels. Your axle should have a sticker or plate that indicates its weight rating. This will tell you the capacity of brake you need. You...
  view full answer...

Do you have a question about this Accessories and Part?