Replacement Brake Shoes and Magnets for Dexter 10" x 1-1/2" Brake Assembly 23-472-00 and 23-473-00
Updated 09/26/2025 | Published 04/22/2025
Products Featured in This Question
Question:
Do you have the brake pad part number K7104600 for a Dexter 23-472-00 and 23-473-00? I need just the pads, not the assembly. Axel weight rating is 3000 pounds.
asked by: Dave W
Expert Reply:
Hey Dave we do offer replacement brake shoes for your Dexter Electric Trailer Brakes Left/Right Hand Assemblies item # K23-472-473-00. They are the 10" x 1-1/2" Electric Brake Shoe/Lining One Wheel item # bp04-065. You'll need two sets to do both brakes.
We also offer replacement magnets, item # BP01-068. For a spring kit you can use item # K71-362-00, for the adjuster item # BP10-060 and for the adjuster dust plug item # BP10-220. We also offer the magnet retainer clips, sold in packs of four as item # BP19-001.
Brake assemblies are the type of product where the cost of all the parts can be greater than the price of a new assembly. If the shoes and magnets need replacing on both sides, you might consider replacing both assemblies. That way, you'd get all new parts. For the right side item # K23-473-00 and item # K23-472-00 for the left.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 1-1/2 Inch Drum
- 3000 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: 10 x 1~1/2 inch drum trailer brakes
- Search Results: trailer bearings races seals caps
- Search Results: trailer brakes
- Search Results: brake shoes
- Search Results: trailer axles
- Search Results: k71~302~00
- Shop: Dexter Trailer Hub and Drum Assembly for 3,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Search Results: dexter trailer brakes
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Recommended Dexter Brakes for 3,000 lb Axles
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,000 lbs
- Shop: Timken 473336 Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Review of Dexter Trailer Hubs and Drums - Hub and Drum - DX62KR
- Q&A: What is Difference Between 3,000 and 3,500 lb Trailer Brake Assembly
- Q&A: Can 10 x 2-1/4 Drum and Brakes Replace 10 x 2-1/2 Drum on Trailer
- Video: Ultimate Overview of the Dexter Electric Trailer Brake Assembly
- Q&A: Replacements for Hubs 008-418-02 That Use 10 x 1-1/2 Brake Assemblies
- Video: In-Depth Review of the Replacement Race
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Can 10 x 2-1/4 Inch Electric Brakes Replace 10 x 1-1/2 Inch Assemblies on Dexter 2.8K Axle
- Q&A: Can Dexter 10 x 1-1/2 Inch Electric Drum Brakes be Replaced with 10 x 2-1/4 Inch Brakes
- Video: What to Know About the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Video: The Low-Down on the Dexter Electric Trailer Brake Assembly
- Video: In-Depth Review of the Adco Universal RV Cover Patch Kit
Jerred H.
9/26/2025
Hey Dave, did you decide to go with just the replacement brake shoes, or did you consider replacing the entire brake assemblies? I'm curious because it could help others make a decision when faced with similar choices.