Building or servicing a heavy-duty disc brake setup? This caliper delivers strong braking performance with a self-adjusting, low-drag design. Corrosion-resistant finishes help protect against rust in freshwater and saltwater applications.
When you're building or servicing a hydraulic disc brake setup, the caliper has to clamp smoothly and release without dragging more than it should. This disc brake caliper holds and protects the piston, uses a self-adjusting design for smooth, even braking, and retracts the piston farther than traditional models to help reduce friction and heat buildup. Ceramic brake pads, fittings, and mounting bolts are included, while a hydraulic brake actuator rated at 1,600 psi or above is required and sold separately.
Brake parts live close to road spray, launch ramps, and heat from repeated stops. Cast-iron construction helps prevent flexing and maintain braking torque consistency, while zinc dichromate and anti-corrosion finishes help resist rust and environmental exposure. A 300 to 400 hour salt-spray rating supports freshwater and saltwater applications, keeping the caliper ready for the next service interval.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer. Let's take a look at our Lippert Disc Brake Caliper with pads and fittings for 3,500 pound to 6,000 pound hydraulic disc brake setup. So folks, if your trailer has been lacking performance as far as braking, or you're hearing grinding noises, or recognizing that you have uneven braking, it could be time to replace the worn out caliper and/or the pads. So this is an all-in-one kit. It has the pads and the calipers.
You get all the bolts needed here. You have the different connections here for the brake lines and everything as well. And there's just a piece of foam here. That comes with it in shipping. It just keeps the pads in place so they don't fall out and stuff while I'm carrying it.
But everything here is heavy duty. This is great for those lighter trailers that use, again, up to a 6,000 pound axle. And they even have printed on here about bleeding the brakes and everything, and which one does what. So I like how they've got all of that stamped in place all over the caliper. And again, you're going to get the pads, all the bolts, everything you need to do one disc brake side of an axle.
Now, one thing to point out before we go is that your hydraulic brake actuator, that's sold separately if you don't already have one, make sure that it's rated for at least 1600 PSI or above for these to operate correctly. So you need to make sure that you are aware of that PSI rating per the manufacturer with DMAX and Lippert, that these need that PSI of at least 1600 or above to work. So again, folks, you're going to get quantity one. This is the Lippert Disc Brake Caliper with pads. I'm Steve with etrailer.
Thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.