Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This aerodynamic fairing deflects wind around your roof rack to create a quieter ride on the road. Stylish design enhances the overall look of your roof rack. Universal mounting hardware connects to most crossbar styles.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be taking a look at the 44 inch long Rhino-Rack fairing, part number RRRF3. There's also multiple different sizes, starting with the 32-inch part number RRRF1, the 38-inch RRF2, and the 50-inch, RRRF4.Speaker 2: This fairing is going to help by deflecting the air around the vehicle, so it makes for a quieter ride when you're out on the road. This stylish design is going to help to enhance the look of the roof of your vehicle, as well as your roof rack. And when you get your fairing in your box and you pull it out, you're going to have this protective film that's going to be over the top, and you can pull this off if you so choose, or you can leave it on to protect against any kind of bugs or dings or dents on your fairing. And with the wind hitting this, you're going to see that it can bounce off the top of the vehicle, so there's going to be rubber bumpers here on the bottom to help protect the vehicle's finish. And all your tools and accessories for this that you're going to need, including your bolts, washers, clips, brackets, all that stuff will be included, including your Allen tool to fasten them and tighten them down. The Rhino-Rack fairing offers a limited lifetime warranty through the manufacturer. Now that we've gone over some features, let's show you how easy it is to install.
Just make sure that you have your back bolts undone, so the plates will slide out of the way like they have. Set it over the top of your cross-bar and then you can rotate them so they fit nice and flush. Now, this fairing will work with your round, square, elliptical, even arrow type crossbars, and some factory crossbars as well. You just need to make sure that your crossbar has a width of at least 35 1/2 inches. As you can see, these are going to be nice and contoured to the Rhino-Rack roof rack system, meeting up with all the grooves and keeping it nice and aerodynamic. Rotate the bottom around so that the hole lines up with the other hole.
Then, take your bolt, your Allen bolt with the washer, place it in the top, and start threading it in. Use your included Allen tool to tighten them down, and we'll repeat this on the other three. And as you can see when we tighten down the front ones, it's going to pull and adjust pressure to push down on the front by tightening up that back racket. You can see it coming back down it, and you just want to be careful not over-tighten these because the plastic can break. Keep in mind for all your different lengths, all the hardware and features will be the same, and that completes the look at our Rhino-Rack fairings.
Average Customer Rating: 4.0 out of 5 stars (22 Customer Reviews)
This aerodynamic fairing deflects wind around your roof rack to create a quieter ride on the road. Stylish design enhances the overall look of your roof rack. Universal mounting hardware connects to most crossbar styles.With the help of an etrailer customer service person, I took the measurements she needed to determine the right size fairing for my Rhino Aero cross bars. The shipment arrived promptly, but it does not fit. I am already very unhappy with the Rhino cross bars as though mounted properly, the noise is deafening. Now I have to return the fairing. I’m not happy. This is the second time etrailer botched an order.I guess I will just remove the Rhino cross bars and find a local vendor.
Don't get this for the 49" crossbars unless you're willing to do a little custom fabrication (or use a few zip ties) to hold in the outer mounting points. The legs will get in the way of attaching it. That being said, I got it on and I assume its helping the aerodynamics.
I love this product!!..Fits prefect and looks great, also I would like to thank etrailer for there great customer service and fast shipping. I would definitely shop at etrailer again!!
Ok: the bad first. The instructions are rather limited and don’t tell you how to set the fairing up (supposed to have it setting on the roof). And the fairing brackets are plastic, which is concerning when tightening them down. If not adjusted properly, the fairing rattles against the roof (rather annoying). Even when adjusted properly, cross winds will make the same thing happen.
The good: it totally stops any wind noise from the Rhino Rack cross bars I have on my truck. However, see the comment above about adjustments. It looks good on my truck and is easy to install and adjust, although the brackets are plastic. When I throw a basket on the rack, the fairing works by pushing the wind over the basket, eliminating bug impacts on my gear. I’d buy it again, but would suggest to Rhino Rack to improve upon the brackets. Maybe provide specific brackets for the different type of bars instead of trying the universal ones they include.
Excellent product, fast service. Helped reduce the wind noise tremendously
Looks great; only complaint is the material between the brackets flexes as you drive. This results in the fairing buffeting against the roof of your vehicle as you drive and “rattling”. I fixed this issue by putting some small fabric dots (the kind you put on cabinets) on the edges between the fairing and the roof. Problem solved.
It was very simple to add it to the Rhino cross bars. Only have a few minor issues with it. One is that the rubber stoppers that attach to the bottom side of the faring that are supposed to rest on the vehicle roof don’t help very much on a vehicle roof that isn’t smooth. They only rest on two out of the for brackets across the rest of the roof the fairing hits to roof of my truck directly. The other issue I have is when I install my Rhino kayak rack it hits the fairing the bracket that attaches to the crossbar hit the top of the fairing.
Appears well made. Installation was pretty simple. Vibrates on the roof of my truck. Considering removing and returning product due to the vibrating. Honestly the vibrating is more annoying than the whistling that the bars make.
Faring to thin and flimsy for expensive price
The fairing is too big and it needs to be returned
Heather A.
10/20/2018
Rhino rack does make a shorter fairing part # RRRF2. This fairing measures 38 inches long.
Helpful Links
Good product. Mounted mine to a unistr ut.
Fast shipping and a great product. Than ks.
best online store. best service and communication. no doubt.
Works, but seems cheap for being xxx do llars
Fast shipping!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/13/2023
I would not want to deal with wind noise either. Typically if you have 54 inch long cross bars then this fairing would work for you. I will have our Customer Service team contact you.