InfiniteRule Keyed-Alike Hitch Locks for Gen-Y Phantom Hitches - Stainless Steel - Qty 3

Video Transcript for Review of InfiniteRule Keyed Alike Hitch Locks Gen-Y Phantom Hitch - IR68FR

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at these Infinite Rule Keyed Alike Hitch Locks for your Gen Y Phantom Hitches. This set is going to give you all the locks that you need for your Phantom X5K or 7K Drop Hitch in your two inch hitch receiver. And these do feature a heavy duty stainless steel construction. (table knocking) And if you notice they do have a grooved pinhead.

It's gonna make it easier to grab. These all feature a weather resistant tethered dust cap that's going to keep the water and debris out of the keyway. And let me go ahead and give you a brief demonstration of how this is gonna work. So I have it locked up right now. You're gonna get three keys.

So I'm gonna use one of the three keys, insert the key, and then I'm gonna turn it counter clockwise, and just like I am unscrewing a screw, and then that's going to loosen up the head. And then that's going to allow you then to run the pin through either the hitch, the shank itself or the accessory. If you notice we do have an O-ring there that's going to protect the internal components from dirt and grime, and things like that. And so once you have this run through the pinhole, you'll just connect it to the head and then go ahead, and tighten down the key. So I'm turning this clockwise now, and then once it is tight, you're going to line the key up with the nearest hash mark there.

Hopefully you can see that, there's hash marks around the ring there. So I'm just gonna back that off to the nearest hash mark, and then that's going to allow me to remove the key, and then this is going to be locked into place. So very easy operation. Let me go ahead and give you some measurements. I want to give you the measurement of the span or the inside pin length.

So as you can see, inside to inside, right at two and five eights inches. The overall length including that cap, we're about five and three eights inches, not quite five and a half inches. These pins do have a shearer strength of 21,000 pounds each. The pin diameter is five eighths of an inch, and you're gonna get three keys as I've already mentioned and three pins. So very durable, very strong, very great way to protect your investment of your phantom X5K or 7K Drop Hitch in your two inch hitch receiver. Well, that's gonna wrap up our real quick look today. I do hope that our brief time together was helpful for you. Again, my name is Andy. Thank you for joining me.