InfiniteRule Hitch Lock Gen-Y 32K Ball Mount - 2-1/2" and 3" Hitches - Stainless Steel

Video Transcript for Review of InfiniteRule Ball Mounts - Hitch - 34061080-D

Today, we're going to take a look at the InfiniteRule Stainless Steel Hitch Lock for the Gen-Y 32,000 pound ball mount on two and a half inch and three inch hitches. This is a flush style hitch lock, which will secure your Gen-Y 32,000 pound ball Mount to two and a half inch or a three inch hitch. It's a heavy duty stainless steel construction. Notice on the head, it has the grooves in it, which makes it very easy to grab, to remove. And on the inside, I'm going to show you in a minute here when we open it up. On the inside, they do use an overing to help protect the internal components from any dirt or grime.

Notice it has this nice rubber, weather resistant tethered dust cover to keep water and debris out of the key way. It does come with two keys and it is made in the USA.And to remove it, just to show you, you put the key in and then you just turn it like you're unscrewing a bolt and that'll remove the head from the pin. You can see it comes across or comes apart. And there you can see has the red O-Ring right here. This is the part that'll keep any dirt or grime out of the internal inside of the block.

And then when you go to put it back on, just line it up and then you twist this key, like you're tightening the bolt back down.But one other thing I want to show you is on the face of the lock. There's actually four markings. Let me try to zoom in here. And if you can see, there's markings, and there at the 12 o'clock, three o'clock, six o'clock and nine o'clock position and what that does, allow you to take the key out. So what you want to do is you can't go to that one.

So you just back it off to this other and the key will come right out. So you just want to turn the lock until the key lines up with one of those four markings, and that'll let you slide the key right out.So now you're all locked, ready to go. Application again, it's for the Gen-Y 32,000 pound adjustable ball mounts for two and a half inch and three inch hitches. The sheer strength on this lock is 42,000 pounds. And the sheer strength is determined by them placing a locking pin in a stress position, and then subjecting it to increasing force until a required proof load is met or the pin fails.

And again, this lock has a sheer strength of 42,000 pounds. Pin diameter is three quarters of an inch. A few dimensions on this, the overall length one into the other is six and a half inches. And the inside pin length, or the span is three and seven eighths inches. But that should do it for the review on the InfiniteRule Stainless Steel Hitch Lock for the Gen-Y 32,000 pound ball mount on two and a half inch and three inch hitches..