Weld this heavy-duty bracket onto your trailer so that you can easily attach your adjustable-channel-mount coupler (sold separately). Bolt holes are spaced 2" apart on center. Channel is 3" wide.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be revealing part number DM59602. This is the Demco 6 hole adjustable channel bracket. It's going to have a weight capacity of 20,000 pounds. You can weld this heavy duty bracket onto your trailer, so that you can easily attach your adjustable channel mount coupler. The bolt holes are going to be spaced 2 inches apart on center and the channel is going to be about 3 inches wide. The channel bracket is going to have 5 different mounting positions for a coupler or channel accessory. A coupler or channel accessory is going to be sold separately. We have position 1, position 2, position 3, position 4 and position 5. You can use this to mount a ball coupler, a nut ring or clevis on to your trailer. I have a clevis attachment here.
You can see how my accessory will just fit inside that channel and then I can adjust it as needed. All I have to do is make sure that both pinholes are lined up and then I would install my pins and clips, or my pins and locks. The diameter of these pinholes, they're all going to be the same. It's going to measure 5/8ths of an inch. This bracket is going to be a weld on installation, to make sure 00:01:12 a nice sturdy steel construction. It has a raw steel finish and that's sprayed to have 00:01:16 because it's going to cut down on the amount of prep work that's needed in order to get this to weld on. Again, this Demco 6 hole adjustable channel bracket is going to have a weight capacity of 20,000 pounds. If we take a look at the overall height, measuring from edge to edge, that's going to give us a measurement of about 12 inches. Our mounting holes are going to be separated center on center by two inches, and that's going to be the same for each set.
Then our channel width, measuring the inside width, is going to be about 3 inches. Outside width is going to be about 3 and 3/4 of an inch. That's going to complete today's look at part number DM59602, this is the Demco 6 hole adjustable channel bracket with a weight capacity of 20,000 pounds. .
Average Customer Rating: 4.9 out of 5 stars (10 Customer Reviews)
Weld this heavy-duty bracket onto your trailer so that you can easily attach your adjustable-channel-mount coupler (sold separately). Bolt holes are spaced 2" apart on center. Channel is 3" wide.Great for ride height and anti theft 722318
I was concerned about the fit Before welding I had to hammer the corresponding piece into it, but after welding and painting the fit was great. 688692
Great customer service. Fast shipping. Have done business with them several times. Always great. 676856
Got it with the coupler and fit perfect together. Got it shipped to my address fast wich normally its difficult. Thanks etrailer good business. 596060
product as described - good price - prompt shipment - happy customer. would definitely shop here again! 425788
Just what they said it was, welded it on and good to go 380170
Will use these to mount a new 21K coupler to my tag trailer and also to extend another adjustable mount on a genset trailer. These things are massively built and for the price there is no way I can mess around making them. Very fast shipping 241332
tim j - 03/22/2017received the parcel couple days ago on time as always. excellent shape. and goods inside are exactly what I wanted Thankyou Fred 191081
Extremely pleased with the quality and shipping. Will definately use Etrailer again. thank you. 184189
Great products. Great prices. Fast ship ping. 167310
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.