Demco 4-Hole Adjustable Channel Bracket - Weld On - 8" Tall - 7,500 lbs

Video Transcript for In-Depth Review of the Demco 4-Hole Adjustable Channel Bracket

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Demco, eight inch tall, four hole adjustable channel weld on bracket. It has a 7,500 pound weight capacity. Now this is a heavy duty bracket that can be welded to your trailer so that you can easily attach your adjustable channel mount coupler to your trailer. Now the coupler that goes in here it is sold separate at our website. Basically, you can use it to mount a ball coupler, lunette ring, or even a clevis on your trailer.

The channel bracket, as you can see when you mount it, has three different mounting positions, farther coupler and the channel mounting bolts that'll hold your coupler in place. Those are not included, we do sell those separately. They're listed on this product page as a related product and they go by part number of PS024202. Now this is a weld on installation. It is a sturdy steel construction.

It is made in the USA. A few specs on this, the weight capacity, again, is 7,500 pounds. Overall channel height, we measure from the bottom up to the very top is right at eight inches tall. The channel width, which is the inside measurement is approximately right at three inches. And then the hole spacing, in other words if we measure from the center of one hole to the center of the other is gonna be right at two inches, center to center.

But that should do it for the review of this Demco eight inch tall four hole adjustable channel weld on bracket.