Coupler Solution for Towing Tall Trailer On Vehicle with Class I Hitch
Updated 04/21/2016 | Published 04/19/2016
Products Featured in This Question
Question:
Im having some height issues and wanted to ask about a possible solution. I have a 950# tear camper with 1 7/8 coupler that I easily pull with the Curt hitch on my 06 Scion xB. I recently replaced the axle and added leaf springs to the camper which substantially increased the height since I had to use a straight axle instead of a drop axle. Now I really dont match up with my tow vehicle hitch height. Im adding air bags to the rear springs on my car and I have a 5 inch riser bar but Im still falling short. I cant do the Atwood under slung coupler because it takes a 2 5/16 ball which Ill never be able to get with all my 3/4inch holed drawbars and Class II hitch. So...would it be possible to remove the current coupler and put on an adjustable coupler, such as CTA-196 with a corresponding bracket? Its overkill for my 4x8 trailer, but I need the ability to get the tongue up a bit. If it is possible, whats the most height I could gain? My springs are under slung, Ive got the tallest riser bar that will fit my hitch, Im putting bags on my back springs, so Im at a loss of how else to adjust height economically except changing couplers. Any advice would be greatly appreciated. Ive had nothing but great service from you all.
asked by: Susan H
Helpful Expert Reply:
If you are willing to replace the coupler of your trailer with a tall channel so that the part # CTA-196 will fit it that would be your best option. You would just need a qualified fabricator to weld on a channel like the part # BDAC5000300 which is 8 inches tall. For a 12 inch tall bracket you would instead need the part # DM59602.
Product Page this Question was Asked From
Sleeve-Lock Trailer Coupler - Adjustable Channel Mount - Black - 2" Ball - 7,000 lbs
- Adjustable Trailer Coupler
- Coupler Only
- 3 Inch Channel
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Pin-Style Latch
- Powder Coat Finish
- etrailer
more information >
Continue Researching
- Shop: Trailer Wiring
- Video: In-Depth Review of the Optronics Fleet LED Trailer Tail Lights w/ Grommets
- Video: Feature Breakdown: Buyers Products Mounting Plate for Lunette Ring
- Video: Review of the Dexter Brake Actuator
- Video: Review of Titan Brake Actuator - T4848400317
- Video: An In-Depth Look at the Dexter Hydraulic Brake Actuator w/ Drop and Electric Lockout
- Video: Detailed Breakdown of the Demco Lunette Ring with 5-Position Adjustable Channel
- Video: Detailed Breakdown of the Dexter Lunette Ring
- Search Results: lunette ring
- Search Results: trailer lights
- Search Results: nose plate
- Search Results: 3" channel
- Search Results: titan model 20
- Shop: Demco 6-Hole Adjustable Channel Bracket - Weld On - 12" Tall - 20,000 lbs
- Shop: Demco Lunette Ring with 5-Position Adjustable Channel - 3" Diameter - Black - 25,000 lbs
- Shop: Dexter Lunette Ring w/ 3-Position Adjustable Channel - 3" Diameter - Raw - 21,000 lbs
- Shop: Buyers Products 3/4" Thick Trailer Nose Plate For Mounting Lunette Ring
- Q&A: Is the Titan Brake Actuator 4848500 Bolt-On or Weld-On
- Q&A: Will a Gen-Y Torsion Trailer Coupler Work on a 10K Tilt Deck Trailer
- Q&A: Removal And Replacement Of Damper Shocks In A Dico/Titan Model 20 Surge Brake Actuator
- Shop: Dexter Brake Actuator - Drum - Primed - 3" Lunette Ring - 5 Position Adjustable Channel - 20K
- Shop: Buyers Products Mounting Plate for Lunette Ring - 16" Long x 7" Wide x 1" Thick
- Shop: Dexter Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black Painted - 25,000 lbs
- Q&A: Adjustable Channel Mount Compatibility with Titan Trailer Coupler
- Q&A: Dimensions of Replacement Damper for Model 20 Actuator
- Q&A: Is The Replacement Damper for Model 20 Actuator Two-Way Damping
- Q&A: Are Dexter Model 6 and Demco DA91 Inner Slides the Same Dimensions
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
on Adjustable Trailer Coupler
