Reese Straight Aluminum Loading Ramp Set - 77" x 13" - 1,250 lbs - Qty 2

Video Transcript for Review of Reese ATV Ramps - Ramp Set - RP25AR

Hello, neighbors, Steven here with etrailer.com. Let's take a look at our Reese straight aluminum loading ramp set. They're gonna measure 77 inches tall by 13 inches wide, and they're rated for 1,250 pounds total capacity or 625 pounds per ramp. Now folks, these are made of a high quality aluminum, so they're super lightweight, and they're gonna let you load your vehicle into your shed, barn, truck bed, things like that. It's gonna be great for ATVs or snowmobiles, dirt bikes, lawn equipment. You are gonna have two ramps, so you do want to set them and space them the same distance apart when you're loading on the vehicle.

Now they are what's considered a punched hole design. And I'm gonna bring one of these up here closer for you, so we can get a better look at that. So a punched hole design on each ramp that's gonna give you tread. These are raised. So they're punched out one side and you kind of see the raised.

That's gonna give you traction. It's also gonna allow water and grime and dirt to drain. So if you have muddy, wet tires in that, it's not gonna slip or anything while you're going up there. As you can see, it's a wide rung. So you got plenty of space there to put everything on.

And the end of 'em, which I was pretty impressed with, is spring loaded. (ladder clinging) So it's got a spring on one side here, and when you put these in place, then they will fit. And then you can angle it and then that's gonna hold on and nice and tight at the top for a safe and secure hold while you're loading them. Now I get your close up. I do wanna show you, they each come with a pre-installed strap.

Now what the strap is for is for your safety. Okay, so it is a cam buckle strap. So quite simply you've got the strap through here, it's spring loaded here, and then you can pull this, make it looser or tighter as needed. But what you'll do is when you put the ramp in place, much like I got over here, once you've got it in place on your vehicle or trailer or whatnot, you're gonna take this other part of the strap and you'll hook it either underneath the bumper of the truck, a piece of angle iron, or a support piece on the trailer or something like that, and then cinch it tight. What that's gonna do, it's gonna hold that ramp nice and tight up against whatever you're going up on, so your ramp can't slide out from underneath you. 'Cause you don't want that to happen, right Want to be safe. Now what you also can do with these is pretty impressive. You can take and combine these. (ladder banging) And make one big ramp. So I don't know how good you can see over here and bear with me. You got a little nub here and here on the outside. But then on the other side you have a matching slot. So what you would do is you would take those two slots, line 'em up, push 'em together, and now you've got one solid ramp that you can use. (ladder banging) Again, bear with me while I get it in place here. So then again, you'd have one solid ramp that you could use to then go up. Maybe you got a push mower or snowblower or something that's got a shorter wheel base, and then you can go up. So again, having those being able to connect is pretty impressive. Then to disconnect them, you simply pull up and separate 'em. So, very nice little set of ramps folks. These are the Reese straight aluminum loading ramp set. Once again, 13 inches wide, 77 inches tall. Again, they can hook together and they have the included safety straps to attach while loading. Well folks that's gonna wrap it up. A nice one year warranty from Reese. My name is Steven, thanks so much for watching. Stay safe while you're loading.